Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Effects of Palm Oil Fuel Ash on Mechanical and Durability Properties of Sustainable Foamed Concrete

Journal of the Civil Engineering Forum · Vol. 11 No. 1 (2025) · hlm. 79–88

DOI
10.22146/jcef.13749
ISSN
2549-5925, 2581-1037
Terbit
2025-01-17
Penerbit
Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada
Bahasa
eng

Abstrak

In recent years, mortar bricks or autoclaved aerated concrete (AAC), also known as foamed concrete, have been widely used as masonry wall materials. Foamed concrete, like bricks, can be produced by adding a foaming agent to achieve the desired weight and density, while meeting requirements for strength and durability. However, the search for sustainable construction materials has become imperative, including the use of waste materials to partially replace cement. The incorporation of SCM in the production of cement-based materials, such as foamed concrete, has a significant impact on reducing CO 2 emissions and promoting a sustainable environment. POFA, a secondary product derived from the palm oil industry that is typically left on the ground, poses environmental problems. Due to its good performance and pozzolanic reactions, POFA-based construction materials have great potential as alternatives to ordinary Portland cement. Unlike previous studies, this research evaluates the strength and durability of foamed concrete with variations in foam agent dosages, including finer particles of POFA (100μm) as a partial cement replacement. The study produced a total of 6 batches of foamed concrete, measuring compressive strength, porosity, water absorption, and electrical resistivity. Additionally, the research examined the correlation between compressive strength and porosity, as well as compressive strength and electrical resistivity. This study concludes that an ideal content of 10% POFA with a foaming agent-to-water ratio (fa/w) of 1/60 can achieve the best strength of foamed concrete. Furthermore, a partial cement replacement with 20% POFA could potentially increase the compressive strength to levels similar to those of normal foamed concrete (without POFA).

Kata kunci

Jaringan kolaborasi para penulis

4 penulis · 5 tautan kepenulisan bersama · 2 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Sulawesi Barat
  • Tun Hussein Onn University of Malaysia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
ApriansyahAfiliasi tidak diketahui2

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.ugm.ac.id/v3/jcef/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Effects of Palm Oil Fuel Ash on Mechanical and Durability Properties of Sustainable Foamed Concrete</dc:title>
	<dc:creator>Patah, Dahlia</dc:creator>
	<dc:creator>Dasar, Amry </dc:creator>
	<dc:creator>Noor, Nurazuwa Md.</dc:creator>
	<dc:subject xml:lang="en-US">Foam agent</dc:subject>
	<dc:subject xml:lang="en-US">POFA</dc:subject>
	<dc:subject xml:lang="en-US">Foamed Concrete</dc:subject>
	<dc:subject xml:lang="en-US">compressive strength</dc:subject>
	<dc:subject xml:lang="en-US">Porosity</dc:subject>
	<dc:subject xml:lang="en-US">Durability</dc:subject>
	<dc:description xml:lang="en-US">In recent years, mortar bricks or autoclaved aerated concrete (AAC), also known as foamed concrete, have been widely used as masonry wall materials. Foamed concrete, like bricks, can be produced by adding a foaming agent to achieve the desired weight and density, while meeting requirements for strength and durability. However, the search for sustainable construction materials has become imperative , including the use of waste materials to partially replace cement. The incorporation of SCM in the production of cement-based materials, such as foamed concrete, has a significant impact on reducing CO 2 emissions and promoting a sustainable environment. POFA, a secondary product derived from the palm oil industry that is typically left on the ground , poses environmental problems. Due to its good performance and pozzolanic reactions, POFA-based construction materials have great potential as alternatives to ordinary Portland cement. Unlike previous studies, this research evaluates the strength and durability of foamed concrete with variations in foam agent dosages, including finer particles of POFA (100μm) as a partial cement replacement. The study produced a total of 6 batches of foamed concrete, measuring compressive strength, porosity, water absorption, and electrical resistivity. Additionally, the research examined the correlation between compressive strength and porosity, as well as compressive strength and electrical resistivity. This study concludes that an ideal content of 10% POFA with a foaming agent-to-water ratio (fa/w) of 1/60 can achieve the best strength of foamed concrete. Furthermore, a partial cement replacement with 20% POFA could potentially increase the compressive strength to levels similar to those of normal foamed concrete (without POFA).</dc:description>
	<dc:publisher xml:lang="en-US">Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada</dc:publisher>
	<dc:date>2025-01-17</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.ugm.ac.id/v3/JCEF/article/view/13749</dc:identifier>
	<dc:identifier>10.22146/jcef.13749</dc:identifier>
	<dc:source xml:lang="en-US">Journal of the Civil Engineering Forum; Vol. 11 No. 1 (January 2025); 79-88</dc:source>
	<dc:source>2549-5925</dc:source>
	<dc:source>2581-1037</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.ugm.ac.id/v3/JCEF/article/view/13749/5385</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 The Author(s)</dc:rights>
</oai_dc:dc>