Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Evaluating the Role of Mechanical Connections and Reinforcements in Modular Timber Beam Behaviour

Journal of the Civil Engineering Forum · Vol. 12 No. 1 (2025) · hlm. 11–22

DOI
10.22146/jcef.21594
ISSN
2549-5925, 2581-1037
Terbit
2025-09-16
Penerbit
Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada
Bahasa
eng

Abstrak

Modular timber construction faces critical challenges in connection performance, with mechanical joints representing the weakest structural elements in segmented systems, particularly for rapid-deployment infrastructure applications such as temporary forest bridges. This research addresses the fundamental knowledge gap regarding the combined effects of mechanical connections and reinforcement strategies on modular timber beam structural behavior. The study investigates modular timber beam flexural performance through experimental evaluation of steel U-shaped connectors and Chopped Strand Mat (CSM) reinforcement applied to the tension zones, examining how beam segmentation affects structural integrity. Ten I-section modular timber beams with lattice-web configuration underwent three-point bending tests using a Shimadzu AG-IS 100 kN Universal Testing Machine at 6.6 mm/min loading rate, with specimens spanning 3.0 meters supported at 2.7-meter intervals. Test specimens featured varying segmentation patterns (0.6m, 0.75m, 1.0m, and 1.5m segment lengths) connected via U-shaped steel connectors and bolts, with selected beams receiving 5mm thick CSM reinforcement at the bottom flanges. Mechanical properties including modulus of elasticity (MOE), modulus of rupture (MOR), and flexural stiffness were systematically measured to quantify reinforcement and segmentation effects on joint behavior and structural continuity. Results demonstrate that CSM reinforcement provides substantial performance improvements, with ETR136 achieving a 49% increase in ultimate load capacity (29,397 N vs 19,709 N for ETN131) and superior ductility characteristics. However, segmentation introduces significant structural vulnerabilities, with five-segment beams (ETN50.65) showing a 49.5% capacity reduction compared to continuous specimens. The research reveals that while CSM reinforcement effectively delays crack initiation and reduces peak tensile strain by an average of 31%, mechanical joints remain critical failure points due to stress concentrations at the timber-bolt interfaces. The three-segment configuration emerges as optimal for balancing structural performance with practical modularity requirements. These findings provide essential design guidance for modular timber systems in rapid-deployment applications, emphasizing the need for optimized connection strategies and hybrid reinforcement techniques to enhance the structural integrity and durability of segmented timber infrastructure.

Kata kunci

Jaringan kolaborasi para penulis

14 penulis · 45 tautan kepenulisan bersama · 19 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • Universiti Teknologi MARA
  • Forest Research Institute Malaysia
  • Port and Airport Research Institute
  • Universitas Cokroaminoto Yogyakarta
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Angga Fajar SetiawanUniversitas Gadjah Mada2
Iman SatyarnoUniversitas Gadjah Mada1
Ali AwaludinUniversitas Gadjah Mada1
Yusuf HarokiPort and Airport Research Institute1
Muhamad Fauzi DarmawanUniversitas Gadjah Mada1
Sidiq PurnomoAfiliasi tidak diketahui1
Ignatius Harry SumartonoAfiliasi tidak diketahui1
Muhammad Akhsin MuflikhunUniversitas Gadjah Mada1
Suprapto SiswosukartoUniversitas Gadjah Mada1
Oktalia Wuranti PutriUniversitas Gadjah Mada1
MuslikhUniversitas Cokroaminoto Yogyakarta1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.ugm.ac.id/v3/jcef/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Evaluating the Role of Mechanical Connections and Reinforcements in Modular Timber Beam Behaviour</dc:title>
	<dc:creator>Mamat, Mohd Rizuwan</dc:creator>
	<dc:creator>Mohd Hashim, Mohd Hisbany </dc:creator>
	<dc:creator>Md Nor, Noorsuhada</dc:creator>
	<dc:subject xml:lang="en-US">Modular timber beams</dc:subject>
	<dc:subject xml:lang="en-US">Chopped Strand Mat</dc:subject>
	<dc:subject xml:lang="en-US">Stiffness degradation</dc:subject>
	<dc:subject xml:lang="en-US">Timber-bolt connections</dc:subject>
	<dc:subject xml:lang="en-US">Segmented beam behaviour</dc:subject>
	<dc:description xml:lang="en-US">Modular timber construction faces critical challenges in connection performance, with mechanical joints representing the weakest structural elements in segmented systems, particularly for rapid-deployment infrastructure applications such as temporary forest bridges. This research addresses the fundamental knowledge gap regarding the combined effects of mechanical connections and reinforcement strategies on modular timber beam structural behavior. The study investigates modular timber beam flexural performance through experimental evaluation of steel U-shaped connectors and Chopped Strand Mat (CSM) reinforcement applied to the tension zones, examining how beam segmentation affects structural integrity. Ten I-section modular timber beams with lattice-web configuration underwent three-point bending tests using a Shimadzu AG-IS 100 kN Universal Testing Machine at 6.6 mm/min loading rate, with specimens spanning 3.0 meters supported at 2.7-meter intervals. Test specimens featured varying segmentation patterns (0.6m, 0.75m, 1.0m, and 1.5m segment lengths) connected via U-shaped steel connectors and bolts, with selected beams receiving 5mm thick CSM reinforcement at the bottom flanges. Mechanical properties including modulus of elasticity (MOE), modulus of rupture (MOR), and flexural stiffness were systematically measured to quantify reinforcement and segmentation effects on joint behavior and structural continuity. Results demonstrate that CSM reinforcement provides substantial performance improvements, with ETR136 achieving a 49% increase in ultimate load capacity (29,397 N vs 19,709 N for ETN131) and superior ductility characteristics. However, segmentation introduces significant structural vulnerabilities, with five-segment beams (ETN50.65) showing a 49.5% capacity reduction compared to continuous specimens. The research reveals that while CSM reinforcement effectively delays crack initiation and reduces peak tensile strain by an average of 31%, mechanical joints remain critical failure points due to stress concentrations at the timber-bolt interfaces. The three-segment configuration emerges as optimal for balancing structural performance with practical modularity requirements. These findings provide essential design guidance for modular timber systems in rapid-deployment applications, emphasizing the need for optimized connection strategies and hybrid reinforcement techniques to enhance the structural integrity and durability of segmented timber infrastructure.</dc:description>
	<dc:publisher xml:lang="en-US">Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada</dc:publisher>
	<dc:date>2025-09-16</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.ugm.ac.id/v3/JCEF/article/view/21594</dc:identifier>
	<dc:identifier>10.22146/jcef.21594</dc:identifier>
	<dc:source xml:lang="en-US">Journal of the Civil Engineering Forum; Vol. 12 No. 1 (January 2026); 11-22</dc:source>
	<dc:source>2549-5925</dc:source>
	<dc:source>2581-1037</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.ugm.ac.id/v3/JCEF/article/view/21594/6148</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 The Author(s)</dc:rights>
</oai_dc:dc>