Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Hydrated Lime–Based Coating for Cool Pavement Technologies: Evaluation of Durability and Thermal Performance

Journal of the Civil Engineering Forum · Vol. 12 No. 1 (2025) · hlm. 89–103

DOI
10.22146/jcef.24124
ISSN
2549-5925, 2581-1037
Terbit
2025-11-25
Penerbit
Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada
Bahasa
eng

Abstrak

Heat-reflective pavement coatings are commonly employed for road cooling and to mitigate Urban Heat Island (UHI) effects by reflecting solar radiation and reducing surface temperatures. However, their cooling efficiency diminishes over time due to abrasion, soiling, UV exposure, and environmental aging, which degrade the reflective polymer layer. As a cost-effective alternative, hot-rolled hydrated lime (HL) applied to pavement surfaces has emerged, forming a light-coloured mineral layer that enhances reflectivity and potentially reduces pavement temperature. This study investigates hydrated lime (HL) as a mineral-based alternative, applied through hot-rolling to form a reflective surface layer that is compatible with conventional asphalt practices. Its performance was evaluated through laboratory thermal simulations (day–night cycling) and abrasion wear testing and compared with three commercial paint-based HRCs: epoxy resin–TiO₂ and acrylic emulsion–TiO₂. The results show that HL coatings achieved surface temperature reductions of up to 21.89 °C compared to uncoated asphalt, exceeding the best-performing paint-based sample (White-AE, 19.29 °C), suggesting that HL has strong potential as an effective reflective coating. This was achieved with a formulation of fine HL particles (No. 400 mesh) at a higher dosage (200 g/m²). In abrasion resistance tests, HL outperformed paint based HRCs, with lower mass losses (0.6–1.3 g vs. 0.8–1.5 g), which was attributed to stronger adhesion and particle embedment. In addition, post-abrasion tests revealed that HL samples retained better thermal stability, with smaller temperature increases (ΔT: 5.9–6.8 °C) than HRCs (ΔT: 6.3–7.2 °C). Based on these outcomes, HL applied at 200 g/m² using fine particles (No.400 mesh) is recommended as the optimal formulation for maximizing cooling performance and surface durability. Overall, these findings suggest that hot-rolled HL is a durable, low-cost, and effective alternative cooling strategy to popular HRCs for UHI mitigation.

Kata kunci

Jaringan kolaborasi para penulis

8 penulis · 16 tautan kepenulisan bersama · 2 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • University of Engineering and Technology Taxila
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Bambang SuhendroUniversitas Gadjah Mada1
Wardhani SartonoUniversitas Gadjah Mada1
Purbolaras NawangalamUniversitas Gadjah Mada1
Hary Christady HardiyatmoUniversitas Gadjah Mada1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.ugm.ac.id/v3/jcef/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Hydrated Lime–Based Coating for Cool Pavement Technologies: Evaluation of Durability and Thermal Performance</dc:title>
	<dc:creator>Khuzamy, Muhammad</dc:creator>
	<dc:creator>Rahman, Taqia</dc:creator>
	<dc:creator>Ahmed, Imtiaz</dc:creator>
	<dc:creator>Zaidi, Syed Bilal Ahmed </dc:creator>
	<dc:subject xml:lang="en-US">Cool pavements</dc:subject>
	<dc:subject xml:lang="en-US">Hydrated lime</dc:subject>
	<dc:subject xml:lang="en-US">UHI mitigation</dc:subject>
	<dc:subject xml:lang="en-US">Heat reflective coating</dc:subject>
	<dc:subject xml:lang="en-US">Road cooling</dc:subject>
	<dc:subject xml:lang="en-US">Asphalt</dc:subject>
	<dc:description xml:lang="en-US">Heat-reflective pavement coatings are commonly employed for road cooling and to mitigate Urban Heat Island (UHI) effects by reflecting solar radiation and reducing surface temperatures. However, their cooling efficiency diminishes over time due to abrasion, soiling, UV exposure, and environmental aging, which degrade the reflective polymer layer. As a cost-effective alternative, hot-rolled hydrated lime (HL) applied to pavement surfaces has emerged, forming a light-coloured mineral layer that enhances reflectivity and potentially reduces pavement temperature. This study investigates hydrated lime (HL) as a mineral-based alternative, applied through hot-rolling to form a reflective surface layer that is compatible with conventional asphalt practices. Its performance was evaluated through laboratory thermal simulations (day–night cycling) and abrasion wear testing and compared with three commercial paint-based HRCs: epoxy resin–TiO₂ and acrylic emulsion–TiO₂. The results show that HL coatings achieved surface temperature reductions of up to 21.89 °C compared to uncoated asphalt, exceeding the best-performing paint-based sample (White-AE, 19.29 °C), suggesting that HL has strong potential as an effective reflective coating. This was achieved with a formulation of fine HL particles (No. 400 mesh) at a higher dosage (200 g/m²). In abrasion resistance tests, HL outperformed paint based HRCs, with lower mass losses (0.6–1.3 g vs. 0.8–1.5 g), which was attributed to stronger adhesion and particle embedment. In addition, post-abrasion tests revealed that HL samples retained better thermal stability, with smaller temperature increases (ΔT: 5.9–6.8 °C) than HRCs (ΔT: 6.3–7.2 °C). Based on these outcomes, HL applied at 200 g/m² using fine particles (No.400 mesh) is recommended as the optimal formulation for maximizing cooling performance and surface durability. Overall, these findings suggest that hot-rolled HL is a durable, low-cost, and effective alternative cooling strategy to popular HRCs for UHI mitigation.</dc:description>
	<dc:publisher xml:lang="en-US">Department of Civil and Environmental Engineering, Faculty of Engineering, Universitas Gadjah Mada</dc:publisher>
	<dc:date>2025-11-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.ugm.ac.id/v3/JCEF/article/view/24124</dc:identifier>
	<dc:identifier>10.22146/jcef.24124</dc:identifier>
	<dc:source xml:lang="en-US">Journal of the Civil Engineering Forum; Vol. 12 No. 1 (January 2026); 89-103</dc:source>
	<dc:source>2549-5925</dc:source>
	<dc:source>2581-1037</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.ugm.ac.id/v3/JCEF/article/view/24124/6445</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 The Author(s)</dc:rights>
</oai_dc:dc>