Melola Discovery

← Melola Discovery

Jurnal SINTA 2

Wideband and Multiband Antenna Design and Fabrication for Modern Wireless Communications Systems

Journal of ICT Research and Applications (JICTRA) · Vol. 7 No. 2 (2013) · pp. 151–163

DOI
10.5614/itbj.ict.res.appl.2013.7.2.4
ISSN
2338-5499, 2337-5787
Published
2013-11-01
Publisher
DRI - ITB
Language
eng

Abstract

One of the major challenges due to spectrum scarcity in modern wireless communication is on antenna design that can serve a non-contagious frequency spectrum. In this paper, wideband and multiband design approaches are proposed to produce antennas that can serve various wireless technologies using different frequencies from 2.3 to 6.0 GHz, covering WiFi frequencies at 2.4-2.48 GHz, 5,15-5,35 GHz and 5,725-5,825 GHz, as well as WiMax frequencies at 2.3-2.4 GHz, 2.495-2.695 GHz, 3.3-3.8 GHz, and 5.25-5.85 GHz. The wideband and multiband antenna were implemented on an 0.8 mm thick of FR4 epoxy dielectric substrate with permittivity εr="4".3. The return loss of 10 dB can be achieved for 2.3 to 6 GHz in wideband antenna, and a tripe band of 2.3-2.8 GHz, 3.3-3.7 GHz, and above 4.6 GHz in multiband antenna. The gain of both antennas increases almost linearly from 0 dB at 2.3 GHz to around 4.5 dB at 6 GHz, except for the stop band at 2.8-3.3 GHz which has a significant drop of gain, corresponding to the stop frequency band. Antenna radiation pattern is bidirectional at x-y plane and nearly omnidirectional at y-z plane, and shows a similar patern for both wideband and multiband design approaches.

Collaboration network of the authors

15 authors · 31 co-authorship links · 3 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Bandung Institute of Technology
  • State University of Jakarta
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Sugihartono SugihartonoBandung Institute of Technology2
Eko MarpanajiBandung Institute of Technology1
Armein Z. R. LangiBandung Institute of Technology1
Bamba Riyanto TrilaksonoAffiliation unknown1
Andri MahendraBandung Institute of Technology1
Thay LiungBandung Institute of Technology1
Rina Pudji AstutiBandung Institute of Technology1
Andriyan Bayu SuksmonoBandung Institute of Technology1
Iskandar IskandarAffiliation unknown1
Prasetiyono Hari MuktiBandung Institute of Technology1
Baso MaruddaniState University of Jakarta1
Achmad MunirBandung Institute of Technology1
Irma ZakiaBandung Institute of Technology1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jictra/oai, first harvested 26 Okt 2026, last seen 26 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Wideband and Multiband Antenna Design and Fabrication for Modern Wireless Communications Systems</dc:title>
	<dc:creator>Kurniawan, Adit</dc:creator>
	<dc:creator>Mukhlishin, Salik</dc:creator>
	<dc:description xml:lang="en-US">One of the major challenges due to spectrum scarcity in modern wireless communication is on antenna design that can serve a non-contagious frequency spectrum. In this paper, wideband and multiband design approaches are proposed to produce antennas that can serve various wireless technologies using different frequencies from 2.3 to 6.0 GHz, covering WiFi frequencies at 2.4-2.48 GHz, 5,15-5,35 GHz and 5,725-5,825 GHz, as well as WiMax frequencies at 2.3-2.4 GHz, 2.495-2.695 GHz, 3.3-3.8 GHz, and 5.25-5.85 GHz. The wideband and multiband antenna were implemented on an 0.8 mm thick of FR4 epoxy dielectric substrate with permittivity εr="4".3. The return loss of 10 dB can be achieved for 2.3 to 6 GHz in wideband antenna, and a tripe band of 2.3-2.8 GHz, 3.3-3.7 GHz, and above 4.6 GHz in multiband antenna. The gain of both antennas increases almost linearly from 0 dB at 2.3 GHz to around 4.5 dB at 6 GHz, except for the stop band at 2.8-3.3 GHz which has a significant drop of gain, corresponding to the stop frequency band. Antenna radiation pattern is bidirectional at x-y plane and nearly omnidirectional at y-z plane, and shows a similar patern for both wideband and multiband design approaches.</dc:description>
	<dc:publisher xml:lang="en-US">DRI - ITB</dc:publisher>
	<dc:date>2013-11-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jictra/article/view/837</dc:identifier>
	<dc:identifier>10.5614/itbj.ict.res.appl.2013.7.2.4</dc:identifier>
	<dc:source xml:lang="en-US">Journal of ICT Research and Applications; Vol. 7 No. 2 (2013); 151-163</dc:source>
	<dc:source>2338-5499</dc:source>
	<dc:source>2337-5787</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jictra/article/view/837/515</dc:relation>
</oai_dc:dc>