Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Improving the milling machine competency learning outcomes through industrial project-based learning for vocational school students

Jurnal Pendidikan Vokasi · Vol. 9 No. 2 (2019) · hlm. 151–160

DOI
10.21831/jpv.v9i2.23686
ISSN
2476-9401, 2088-2866
Terbit
2019-06-30
Penerbit
ADGVI & Graduate School of Universitas Negeri Yogyakarta
Bahasa
eng

Abstrak

This research is motivated by the implementation of conventional learning. Besides, student learning motivation is still low due to student activities that are less centered on making workpieces that are suitable for work in the industry. Learning outcomes show that only 55.88% of students reach Minimum Completeness Criteria (Kriteria Ketuntasan minimum or KKM). The design and learning of productive machining competencies that are in accordance with the needs of the industry influence students' experience and learning outcomes. This study aims to analyze the results of industrial project-based learning (InPro-BL) milling machine competency learning outcomes in SMK Negeri 1 Semarang. The method used in this study is Class Action Research (CAR) through four stages: (1) planning, (2) implementation of actions, (3) observation and evaluation, (4) reflection. The samples were 34 students of class XII of Mechanical Engineering. The data were collected using product assessment instruments to measure dimensional accuracy, timeliness, level of disability, level of smoothness, and work attitude. This study was descriptive quantitative, and qualitative. The results of the study show that InPro-BL is effective in improving the learning outcomes of milling machine competencies. In Cycle I, there is an increase in learning outcomes, from 19 students who completed the KKM to 25 students or 73.52%. In Cycle II, there are 88.23% of students passed the KKM. These results can be improved by paying attention to the management of learning time through the block system, teacher's understanding of industrial-project-based learning, and industry guest teachers mentoring every learning process.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 92 tautan kepenulisan bersama · 7 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Halu Oleo
  • State University of Semarang
  • Universitas Muhammadiyah Kendari
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Kadir KadirUniversitas Halu Oleo5
Wirawan SumbodoAfiliasi tidak diketahui5
Hendra Nelva SaputraUniversitas Muhammadiyah Kendari4
La MasiUniversitas Halu Oleo3
Arvyaty ArvyatyUniversitas Halu Oleo3
KriswantoAfiliasi tidak diketahui3
Nurhayati NurhayatiUniversitas Halu Oleo2
Kadir KadirUniversitas Halu Oleo2
Arif RahmadhiAfiliasi tidak diketahui2
Imam SukocoAfiliasi tidak diketahui2
Habib BunajarAfiliasi tidak diketahui2
Sitti Rahmaniar AbubakarUniversitas Halu Oleo1
Ikman IkmanUniversitas Halu Oleo1
Abdin AbdinUniversitas Halu Oleo1
Darnawati DarnawatiUniversitas Halu Oleo1
Jamiludin JamiludinUniversitas Halu Oleo1
La BatiaUniversitas Halu Oleo1
Irawaty IrawatyUniversitas Halu Oleo1
Aisyah AisyahUniversitas Halu Oleo1
Intan Wardany Ranat AmryUniversitas Halu Oleo1
Hasnawati HasnawatiUniversitas Halu Oleo1
Endri NuryantoUniversitas Halu Oleo1
Wa SudiUniversitas Halu Oleo1
Jafar JafarUniversitas Halu Oleo1
Tetty ApryaniUniversitas Halu Oleo1
Rahmad PrajonoUniversitas Halu Oleo1
Sri DebiUniversitas Halu Oleo1
Dedhy SetyadiUniversitas Halu Oleo1
Hendriani HendrianiUniversitas Halu Oleo1
Fita SariUniversitas Halu Oleo1
Andi SafitriUniversitas Halu Oleo1
Netty AngraeniUniversitas Halu Oleo1
Era MaryantiUniversitas Halu Oleo1
Kodirun KodirunUniversitas Halu Oleo1
Ramlin RamlinAfiliasi tidak diketahui1
Septian Eko CahyantoState University of Semarang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.uny.ac.id/index.php/jpv/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Improving the milling machine competency learning outcomes through industrial project-based learning for vocational school students</dc:title>
	<dc:creator>Yudiono, Heri</dc:creator>
	<dc:creator>Sumbodo, Wirawan</dc:creator>
	<dc:creator>Salim, Salim</dc:creator>
	<dc:creator>Setiadi, Rizki</dc:creator>
	<dc:subject xml:lang="en-US">learning outcomes</dc:subject>
	<dc:subject xml:lang="en-US">student experience</dc:subject>
	<dc:subject xml:lang="en-US">milling machine engineering</dc:subject>
	<dc:subject xml:lang="en-US">industrial projects</dc:subject>
	<dc:description xml:lang="en-US">This research is motivated by the implementation of conventional learning. Besides, student learning motivation is still low due to student activities that are less centered on making workpieces that are suitable for work in the industry. Learning outcomes show that only 55.88% of students reach Minimum Completeness Criteria (Kriteria Ketuntasan minimum or KKM). The design and learning of productive machining competencies that are in accordance with the needs of the industry influence students' experience and learning outcomes. This study aims to analyze the results of industrial project-based learning (InPro-BL) milling machine competency learning outcomes in SMK Negeri 1 Semarang. The method used in this study is Class Action Research (CAR) through four stages: (1) planning, (2) implementation of actions, (3) observation and evaluation, (4) reflection. The samples were 34 students of class XII of Mechanical Engineering. The data were collected using product assessment instruments to measure dimensional accuracy, timeliness, level of disability, level of smoothness, and work attitude. This study was descriptive quantitative, and qualitative. The results of the study show that InPro-BL is effective in improving the learning outcomes of milling machine competencies. In Cycle I,  there is an increase in learning outcomes, from 19 students who completed the KKM to 25 students or 73.52%. In Cycle II, there are 88.23% of students passed the KKM. These results can be improved by paying attention to the management of learning time through the block system, teacher's understanding of industrial-project-based learning, and industry guest teachers mentoring every learning process.</dc:description>
	<dc:publisher xml:lang="en-US">ADGVI &amp; Graduate School of Universitas Negeri Yogyakarta</dc:publisher>
	<dc:date>2019-06-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.uny.ac.id/index.php/jpv/article/view/23686</dc:identifier>
	<dc:identifier>10.21831/jpv.v9i2.23686</dc:identifier>
	<dc:source xml:lang="en-US">Jurnal Pendidikan Vokasi; Vol. 9 No. 2 (2019); 151-160</dc:source>
	<dc:source>2476-9401</dc:source>
	<dc:source>2088-2866</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.uny.ac.id/index.php/jpv/article/view/23686/12591</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 Jurnal Pendidikan Vokasi</dc:rights>
</oai_dc:dc>