Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Edupreneurship implementation through teaching factory on mechanical engineering competence

Jurnal Pendidikan Vokasi · Vol. 12 No. 3 (2022) · hlm. 212–221

DOI
10.21831/jpv.v12i3.51536
ISSN
2476-9401, 2088-2866
Terbit
2022-11-28
Penerbit
ADGVI & Graduate School of Universitas Negeri Yogyakarta
Bahasa
eng

Abstrak

This study aims to (1) Describe how the edupreneurship implementation through Teaching Factory (TEFA) on the mechanical engineering expertise competence at SMK Muhammadiyah 1 Sukoharjo; (2) Describe the factors supporting the successful implementation of edupreneurship through teaching factory on the mechanical engineering expertise competence at SMK Muhammadiyah 1 Sukoharjo; and (3) Describes the contribution of the edupreneurship implementation through the teaching factory in fostering an entrepreneurial spirit in mechanical engineering students at SMK Muhammadiyah 1 Sukoharjo. This qualitative research used a descriptive approach. The data were collected by interview, observation, and documentation. The informants comprised principals, vice-principals of curriculum, heads of engineering expertise programs, productive teachers, and students. The data analysis technique employed interactive analysis techniques, starting from data collection and then the data were reduced; after being reduced, the data were presented, and the last was verification. The data validity was then tested by triangulation of sources. The findings in this study revealed that (1) In terms of planning, organizing, implementing, and monitoring/evaluating, the edupreneurship implementation through teaching factory on the mechanical engineering expertise competence at SMK Muhammadiyah 1 Sukoharjo has been going very well by producing medical device products, especially patient beds that were produced and have been marketed to PKU Muhammadiyah Hospital in Central Java; (2) The factors driving the success of edupreneurship through technology factory comprised: quality educator resources, adequate infrastructure both in quantity and quality, standard operating procedures according to industry standards, quality products, and a well-established product marketing network; and (3) The edupreneurship implementation through the teaching factory contributes to fostering an entrepreneurial spirit by directly involving students in planning, production, and marketing.

Kata kunci

Jaringan kolaborasi para penulis

3 penulis · 2 tautan kepenulisan bersama · 1 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Ahmad Dahlan
  • Yogyakarta State University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Soenarto SoenartoYogyakarta State University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.uny.ac.id/index.php/jpv/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Edupreneurship implementation through teaching factory on mechanical engineering competence</dc:title>
	<dc:creator>Kuat, Tri</dc:creator>
	<dc:creator>Purnawan, Purnawan</dc:creator>
	<dc:subject xml:lang="en-US">Edupreneurship</dc:subject>
	<dc:subject xml:lang="en-US">entrepreneurial spirit</dc:subject>
	<dc:subject xml:lang="en-US">teaching factory</dc:subject>
	<dc:description xml:lang="en-US">This study aims to (1) Describe how the edupreneurship implementation through Teaching Factory (TEFA) on the mechanical engineering expertise competence at SMK Muhammadiyah 1 Sukoharjo; (2) Describe the factors supporting the successful implementation of edupreneurship through teaching factory on the mechanical engineering expertise competence at SMK Muhammadiyah 1 Sukoharjo; and (3) Describes the contribution of the edupreneurship implementation through the teaching factory in fostering an entrepreneurial spirit in mechanical engineering students at SMK Muhammadiyah 1 Sukoharjo. This qualitative research used a descriptive approach. The data were collected by interview, observation, and documentation. The informants comprised principals, vice-principals of curriculum, heads of engineering expertise programs, productive teachers, and students. The data analysis technique employed interactive analysis techniques, starting from data collection and then the data were reduced; after being reduced, the data were presented, and the last was verification. The data validity was then tested by triangulation of sources. The findings in this study revealed that (1) In terms of planning, organizing, implementing, and monitoring/evaluating, the edupreneurship implementation through teaching factory on the mechanical engineering expertise competence at SMK Muhammadiyah 1 Sukoharjo has been going very well by producing medical device products, especially patient beds that were produced and have been marketed to PKU Muhammadiyah Hospital in Central Java; (2) The factors driving the success of edupreneurship through technology factory comprised: quality educator resources, adequate infrastructure both in quantity and quality, standard operating procedures according to industry standards, quality products, and a well-established product marketing network; and (3) The edupreneurship implementation through the teaching factory contributes to fostering an entrepreneurial spirit by directly involving students in planning, production, and marketing.</dc:description>
	<dc:publisher xml:lang="en-US">ADGVI &amp; Graduate School of Universitas Negeri Yogyakarta</dc:publisher>
	<dc:date>2022-11-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.uny.ac.id/index.php/jpv/article/view/51536</dc:identifier>
	<dc:identifier>10.21831/jpv.v12i3.51536</dc:identifier>
	<dc:source xml:lang="en-US">Jurnal Pendidikan Vokasi; Vol. 12 No. 3 (2022); 212-221</dc:source>
	<dc:source>2476-9401</dc:source>
	<dc:source>2088-2866</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.uny.ac.id/index.php/jpv/article/view/51536/18757</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Jurnal Pendidikan Vokasi</dc:rights>
</oai_dc:dc>