Jurnal
SINTA 1
Tensile Strength and Density Evaluation of Composites from Waste Cotton Fabrics and High-Density Polyethylene (HDPE): Contributions to the Composite Industry and a Cleaner Environment
Mechanical Engineering for Society and Industry · Vol. 1 No. 1 (2021) · hlm. 41–47
ISSN 2798-5245
Terbit 2021-07-29
Penerbit Universitas Muhammadiyah Magelang
Bahasa en
Abstrak
The growth of the textile industry and the massive use of plastic-based materials create economic growth, but it produces waste from post-use, such as clothing waste from cotton fabrics and HDPE that can be recycled and combined as composite materials. Therefore, an experiment was carried out to investigate and analyze the effect of the fiber volume fraction of waste cotton fabric (1.5%, 3.5%, 4.5%, 6%, and 7.5%) with straight fiber arrangement on the tensile strength and density. From the test results, a tensile strength of 178.4 MPa and 182.6 MPa was obtained for yield and max stress, respectively at a fiber volume fraction of 7.5%. Meanwhile, the highest density of 0.95 g/cm3 was obtained at 1.5% fiber volume fraction. The fracture macroscopic view of the specimen shows a resilience fracture (uneven and appears stringy). Although the strength of this composite cannot yet compete with the new composite material, it has a decent environmental contribution. Considering the availability of waste cotton fabrics and HDPE, it promises to be produced as a low-strength composite for construction, ornamentation, or coatings.
Jaringan kolaborasi para penulis
7 penulis ·
15 tautan kepenulisan bersama
· 10 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Universitas Wahid Hasyim University of Kuala Lumpur State University of Semarang National Nuclear Energy Agency of Indonesia
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en">Tensile Strength and Density Evaluation of Composites from Waste Cotton Fabrics and High-Density Polyethylene (HDPE): Contributions to the Composite Industry and a Cleaner Environment</dc:title>
<dc:creator xml:lang="en">Respati, Sri Mulyo Bondan</dc:creator>
<dc:creator xml:lang="en">Purwanto, Helmy</dc:creator>
<dc:creator xml:lang="en">Fakhrudin, Ilham</dc:creator>
<dc:creator xml:lang="en">Prayitno, Pungkas</dc:creator>
<dc:subject xml:lang="en">Composites</dc:subject>
<dc:subject xml:lang="en">Waste cotton fabrics</dc:subject>
<dc:subject xml:lang="en">Waste HDPE</dc:subject>
<dc:subject xml:lang="en">Low strength composites</dc:subject>
<dc:description xml:lang="en">The growth of the textile industry and the massive use of plastic-based materials create economic growth, but it produces waste from post-use, such as clothing waste from cotton fabrics and HDPE that can be recycled and combined as composite materials. Therefore, an experiment was carried out to investigate and analyze the effect of the fiber volume fraction of waste cotton fabric (1.5%, 3.5%, 4.5%, 6%, and 7.5%) with straight fiber arrangement on the tensile strength and density. From the test results, a tensile strength of 178.4 MPa and 182.6 MPa was obtained for yield and max stress, respectively at a fiber volume fraction of 7.5%. Meanwhile, the highest density of 0.95 g/cm3 was obtained at 1.5% fiber volume fraction. The fracture macroscopic view of the specimen shows a resilience fracture (uneven and appears stringy). Although the strength of this composite cannot yet compete with the new composite material, it has a decent environmental contribution. Considering the availability of waste cotton fabrics and HDPE, it promises to be produced as a low-strength composite for construction, ornamentation, or coatings.</dc:description>
<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
<dc:date>2021-07-29</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/5252</dc:identifier>
<dc:identifier>10.31603/mesi.5252</dc:identifier>
<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 1 No. 1 (2021); 41-47</dc:source>
<dc:source>2798-5245</dc:source>
<dc:language>en</dc:language>
<dc:relation>https://journal.unimma.ac.id/mesi/article/view/5252/2512</dc:relation>
<dc:rights xml:lang="en">Copyright (c) 2021 Sri Mulyo Bondan Respati, Helmy Purwanto, Ilham Fakhrudin, Pungkas Prayitno</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Respati, S. M. B., Purwanto, H., Fakhrudin, I., & Prayitno, P. (2021). Tensile Strength and Density Evaluation of Composites from Waste Cotton Fabrics and High-Density Polyethylene (HDPE): Contributions to the Composite Industry and a Cleaner Environment. Mechanical Engineering for Society and Industry, 1(1), 41–47. https://doi.org/10.31603/mesi.5252
Salin
IEEE
S. M. B. Respati, H. Purwanto, I. Fakhrudin, and P. Prayitno, “Tensile Strength and Density Evaluation of Composites from Waste Cotton Fabrics and High-Density Polyethylene (HDPE): Contributions to the Composite Industry and a Cleaner Environment,” Mechanical Engineering for Society and Industry, vol. 1, no. 1, pp. 41–47, 2021, doi: 10.31603/mesi.5252.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.