Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Recent Progress on the Production of Aluminum Oxide (Al2O3) Nanoparticles: A Review

Mechanical Engineering for Society and Industry · Vol. 1 No. 2 (2021) · hlm. 54–77

DOI
10.31603/mesi.5493
ISSN
2798-5245
Terbit
2021-09-08
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

This study aims at discussing several methods to produce aluminum oxide (Al2O3) synthesis methods along with the advantages and disadvantages of each method used. In general, several methods are available: (1) precipitation, (2) combustion, (3) sol-gel, (4) wet chemical, (5) synthesis in supercritical water conditions, (6) microwave, (7) mechanochemical, and (8) hydrolysis, and the most efficient method for synthesizing Al2O3 is precipitation because it is facile and the simplest method (compared to other methods), can be proceeded using inexpensive raw materials, produces less pollution, and has several advantages: high purity product, high thermal stability, nearly homogeneous nanoparticle in size, and control desired particle size. The results of the study help to provide comparisons in producing various Al2O3 synthesis methods.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 131 tautan kepenulisan bersama · 69 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indonesia University of Education
  • Universitas Djuanda
  • Sultan Ageng Tirtayasa University
  • Community College of Qatar
  • Taylor's University
  • Universitas Muhammadiyah Magelang
  • Universiti Brunei Darussalam
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Risti RagadhitaIndonesia University of Education8
Dwi Fitria Al HusaeniIndonesia University of Education7
Abdulkareem Sh. Mahdi Al‐ObaidiTaylor's University5
Dwi Novia Al HusaeniIndonesia University of Education5
Meli FiandiniIndonesia University of Education3
Muji SetiyoUniversitas Muhammadiyah Magelang3
Muhammad Roil BiladUniversiti Brunei Darussalam3
Siti Pupu FauziahUniversitas Djuanda2
Martin RoestamyUniversitas Djuanda2
Irman SuhermanUniversitas Djuanda2
Farid TriawanSampoerna University2
Siti Nur HofifahIndonesia University of Education2
Gabriela Chelvina Santiuly GirsangIndonesia University of Education2
Belkheir HammoutiEuro-Mediterranean University of Fes2
Obie FarobieIPB University2
Novi NurjanahIndonesia University of Education1
Qurratu Aini Alya AdzkiaIndonesia University of Education1
Riki RustanaIndonesia University of Education1
Selvi Citra CarollineIndonesia University of Education1
Shabrina Maulida AgustineIndonesia University of Education1
Muhammad Rendi RamdhaniUniversitas Djuanda1
Abdul KholikUniversitas Djuanda1
Irianto IriantoUniversitas Jambi1
Tatang HermanIndonesia University of Education1
Didi SuryadiIndonesia University of Education1
I Made SuarsanaUniversitas Pendidikan Ganesha1
Al JupriIndonesia University of Education1
Elah NurlaelahIndonesia University of Education1
Zulkaidah Nur AhzanUniversity of Timor1
Alifia Vidiashtari NabillaIndonesia University of Education1
Alifa Listina DewiIndonesia University of Education1
Bentang Arief BudimanBandung Institute of Technology1
Silmi Ridwan PutriIndonesia University of Education1
Anton IrawanSultan Ageng Tirtayasa University1
Teguh KurniawanSultan Ageng Tirtayasa University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Recent Progress on the Production of Aluminum Oxide (Al2O3) Nanoparticles: A Review</dc:title>
	<dc:creator xml:lang="en">Ziva, Adzra Zahra</dc:creator>
	<dc:creator xml:lang="en">Suryana, Yuni Kartika</dc:creator>
	<dc:creator xml:lang="en">Kurniadianti, Yusrianti Sabrina</dc:creator>
	<dc:creator xml:lang="en">Nandiyanto, Asep Bayu Dani</dc:creator>
	<dc:creator xml:lang="en">Kurniawan, Tedi</dc:creator>
	<dc:subject xml:lang="en">Al2O3</dc:subject>
	<dc:subject xml:lang="en">Alumina</dc:subject>
	<dc:subject xml:lang="en">Aluminum oxide</dc:subject>
	<dc:subject xml:lang="en">Synthesis methods</dc:subject>
	<dc:subject xml:lang="en">Nanoparticles</dc:subject>
	<dc:description xml:lang="en">This study aims at discussing several methods to produce aluminum oxide (Al2O3) synthesis methods along with the advantages and disadvantages of each method used. In general, several methods are available: (1) precipitation, (2) combustion, (3) sol-gel, (4) wet chemical, (5) synthesis in supercritical water conditions, (6) microwave, (7) mechanochemical, and (8) hydrolysis, and the most efficient method for synthesizing Al2O3 is precipitation because it is facile and the simplest method (compared to other methods), can be proceeded using inexpensive raw materials, produces less pollution, and has several advantages: high purity product, high thermal stability, nearly homogeneous nanoparticle in size, and control desired particle size. The results of the study help to provide comparisons in producing various Al2O3 synthesis methods.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2021-09-08</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/5493</dc:identifier>
	<dc:identifier>10.31603/mesi.5493</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 1 No. 2 (2021); 54-77</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/5493/2618</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2021 Adzra Zahra Ziva, Yuni Kartika Suryana, Yusrianti Sabrina Kurniadianti, Asep Bayu Dani Nandiyanto, Tedi Kurniawan</dc:rights>
</oai_dc:dc>