Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Square cup deep drawing: Technology transfer from experts to increase production in small and medium enterprise (SME) groups

Mechanical Engineering for Society and Industry · Vol. 4 No. 1 (2024) · hlm. 38–49

DOI
10.31603/mesi.10298
ISSN
2798-5245
Terbit
2024-04-07
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

The deep drawing is a complex steel forming method involving blank dimensions, dimension/height ratio (D/H ratio), and clearance between die and punch (D/P allowance). Failure to identify proper blank dimensions and D/H ratio can lead to production defects such as tears, while failure to recognize the correct clearance can cause wrinkles. This article discusses technology dissemination to Small and medium-sized enterprises (SMEs) for the deep drawing process in producing R-ornament components #3D40x40, considering these crucial parameters. R-ornament #3D40x40 was manufactured using SPCC-SD material with a thickness of 0.65 mm. The Participatory Action Research (PAR) method was employed to collaboratively optimize blank dimensions, D/H ratio, and dies/punch (D/P) allowance with partners. The optimization of blank dimensions successfully eliminated the need for the trimming process, resulting in reduced investment costs in dies and die setup by IDR 15 million and 2.16 million, respectively. Identifying a D/H ratio of 1.32 successfully eliminated tear defects and determining a D/P allowance of 0.87 mm on each side eradicated wrinkle defects in the product. This article contributes to Goal 9 of the Sustainable Development Goals (SDGs), specifically focusing on the Small and Medium-sized Enterprises (SMEs) sector.

Kata kunci

Jaringan kolaborasi para penulis

35 penulis · 156 tautan kepenulisan bersama · 69 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Buana Perjuangan Karawang
  • National Research and Innovation Agency
  • Sekolah Tinggi Teknologi Wastukancana
  • Sebelas Maret University
  • Ministry of Marine Affairs and Fisheries
  • University of Kuala Lumpur
  • Indonesia University of Education
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sukarman SukarmanSekolah Tinggi Teknologi Wastukancana6
Khoirudin KhoirudinUniversitas Buana Perjuangan Karawang6
Amri AbdulahSekolah Tinggi Teknologi Wastukancana2
Rizki Aulia NandaUniversitas Buana Perjuangan Karawang1
Roban RobanUniversitas Buana Perjuangan Karawang1
Rendy GinanjarNational Research and Innovation Agency1
Mochammad ZamroniNational Research and Innovation Agency1
Idil ArdiNational Research and Innovation Agency1
Musa AhmadNational Research and Innovation Agency1
Melta Rini FahmiMinistry of Marine Affairs and Fisheries1
Agus PriyadiNational Research and Innovation Agency1
Muhamad YaminNational Research and Innovation Agency1
Amin RaisSekolah Tinggi Teknologi Wastukancana1
Choirul AnwarSekolah Tinggi Teknologi Wastukancana1
Aries AbbasUniversity of Kuala Lumpur1
Murtalim MurtalimUniversitas Buana Perjuangan Karawang1
Fathan Mubina DewadiUniversitas Buana Perjuangan Karawang1
Amir AmirUniversitas Buana Perjuangan Karawang1
Sukarman SukarmanUniversitas Buana Perjuangan Karawang1
Triyono TriyonoSebelas Maret University1
Budi KristiawanSebelas Maret University1
Ade SuharaUniversitas Buana Perjuangan Karawang1
Renata Lintang AzizahIndonesia University of Education1
Fajar MucharomUniversity of Duisburg-Essen1
Apang Djafar ShieddiequeSekolah Tinggi Teknologi Wastukancana1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The Square cup deep drawing: Technology transfer from experts to increase production in small and medium enterprise (SME) groups</dc:title>
	<dc:creator xml:lang="en">Karyadi, Karyadi</dc:creator>
	<dc:creator xml:lang="en">Sukarman, Sukarman</dc:creator>
	<dc:creator xml:lang="en">Mulyadi, Dodi</dc:creator>
	<dc:creator xml:lang="en">Ulhakim, Muhamad Taufik</dc:creator>
	<dc:creator xml:lang="en">Fazrin, Nazar</dc:creator>
	<dc:creator xml:lang="en">Irfani, Tomas</dc:creator>
	<dc:creator xml:lang="en">Rahdiana, Nana</dc:creator>
	<dc:creator xml:lang="en">Hakim, Afif</dc:creator>
	<dc:creator xml:lang="en">Nurdin, Alizar</dc:creator>
	<dc:creator xml:lang="en">Mucharrom, Fajar</dc:creator>
	<dc:subject xml:lang="en">Blank dimensions</dc:subject>
	<dc:subject xml:lang="en">D/H ratio</dc:subject>
	<dc:subject xml:lang="en">Dies/punch allowance</dc:subject>
	<dc:subject xml:lang="en">Square Cup Deep Drawing</dc:subject>
	<dc:subject xml:lang="en">Participatory Action Research</dc:subject>
	<dc:description xml:lang="en">The deep drawing is a complex steel forming method involving blank dimensions, dimension/height ratio (D/H ratio), and clearance between die and punch (D/P allowance). Failure to identify proper blank dimensions and D/H ratio can lead to production defects such as tears, while failure to recognize the correct clearance can cause wrinkles. This article discusses technology dissemination to Small and medium-sized enterprises (SMEs) for the deep drawing process in producing R-ornament components #3D40x40, considering these crucial parameters. R-ornament #3D40x40 was manufactured using SPCC-SD material with a thickness of 0.65 mm. The Participatory Action Research (PAR) method was employed to collaboratively optimize blank dimensions, D/H ratio, and dies/punch (D/P) allowance with partners. The optimization of blank dimensions successfully eliminated the need for the trimming process, resulting in reduced investment costs in dies and die setup by IDR 15 million and 2.16 million, respectively. Identifying a D/H ratio of 1.32 successfully eliminated tear defects and determining a D/P allowance of 0.87 mm on each side eradicated wrinkle defects in the product. This article contributes to Goal 9 of the Sustainable Development Goals (SDGs), specifically focusing on the Small and Medium-sized Enterprises (SMEs) sector.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2024-04-07</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/10298</dc:identifier>
	<dc:identifier>10.31603/mesi.10298</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 4 No. 1 (2024); 38-49</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/10298/5003</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Sukarman - Sukarman, Karyadi Karyadi, Dodi Mulyadi, Muhamad Taufik Ulhakim, Nazar Fazrin, Tomas Irfani, Nana Rahdiana, Afif Hakim, Alizar Nurdin, Fajar Mucharrom</dc:rights>
</oai_dc:dc>