Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Effect of current, time, ethanol concentration, and pH electrolyte on ZnO coated carbon fiber using electrochemical deposition method

Mechanical Engineering for Society and Industry · Vol. 3 No. 2 (2023) · hlm. 105–113

DOI
10.31603/mesi.10493
ISSN
2798-5245
Terbit
2023-12-26
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

One of the recent developments in carbon fiber is using nano zinc oxide (ZnO) as a coating on carbon fiber to create piezoelectric materials. Piezoelectric materials can generate electricity when subjected to mechanical pressure or strain, and vice versa. ZnO nanomaterials have been a focal point of research due to their high surface-to-volume ratio and high reactivity. This study reported on the use of ZnO for coating agents in carbon fiber sensors. The novelty in this research is the composition of current, time, ethanol concentration, and pH electrolyte to produce the optimum composition of piezoelectric material. The process was conducted using an electrochemical method, which converts electrical energy into chemical energy through electro-deposition. This study considers four independent variables: electrolyte current (1.2 A and 1.4 A), electrolyte pH (2.0, 4.0, and 6.0), ethanol concentration (70% and 96%), and coating duration (90, 180, and 270 seconds). The results show that 1.4 A produces the highest average voltage, followed by electrolyte pH 6 and 70% ethanol concentration. The best coating time was 270 seconds producing the highest average voltage. Micro and SEM confirm that 1.4 A produced a thicker and more uniform layer compared to 1.2 A. High pH, 70% ethanol concentration, and longer coating time also contributed to the formation of thicker layers. XRD test shows that the layers formed had amorphous and hexagonal crystal structures. The average crystal diameter size varies depending on the combination of independent variables used in the coating process. With these results, piezoelectric has potential as a pulse sensor material.

Kata kunci

Jaringan kolaborasi para penulis

22 penulis · 66 tautan kepenulisan bersama · 15 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Jember
  • Bandung Institute of Technology
  • Sacred Heart College
  • University of Technology Malaysia
  • Universitas Halu Oleo
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Mahros DarsinUniversitas Jember3
Revvan Rifada PradizaUniversitas Jember3
Nasrul IlminnafikUniversitas Jember2
Muh Nurkoyim KustantoUniversitas Jember2
Muhammad YusufUniversitas Halu Oleo2
Gaguk JatisukamtoAfiliasi tidak diketahui2
Setyo PambudiUniversitas Jember1
Imam Rudi SugaraUniversitas Jember1
Yuni HermawanUniversitas Jember1
Wardatul JannahBandung Institute of Technology1
Danang YudistiroUniversitas Jember1
Ahmad Rendi MaulanaUniversitas Jember1
Muhammad YusufUniversitas Jember1
Midhun Dominic C. D.Sacred Heart College1
R.A. IlyasUniversity of Technology Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Effect of current, time, ethanol concentration, and pH electrolyte on ZnO coated carbon fiber using electrochemical deposition method</dc:title>
	<dc:creator xml:lang="en">Junus, Salahuddin</dc:creator>
	<dc:creator xml:lang="en">Aryantaka, Gindeka Bimara</dc:creator>
	<dc:creator xml:lang="en">Prayogi, Rizky Akhmad</dc:creator>
	<dc:creator xml:lang="en">Asrofi, Mochamad</dc:creator>
	<dc:creator xml:lang="en">Sakura, Rahma Rei</dc:creator>
	<dc:creator xml:lang="en">Widityo, R. Puranggo Ganjar</dc:creator>
	<dc:creator xml:lang="en">Sidartawan, Robertus</dc:creator>
	<dc:subject xml:lang="en">Piezoelectric</dc:subject>
	<dc:subject xml:lang="en">Carbon fiber</dc:subject>
	<dc:subject xml:lang="en">ZnO</dc:subject>
	<dc:subject xml:lang="en">Electrochemical deposition</dc:subject>
	<dc:description xml:lang="en">One of the recent developments in carbon fiber is using nano zinc oxide (ZnO) as a coating on carbon fiber to create piezoelectric materials. Piezoelectric materials can generate electricity when subjected to mechanical pressure or strain, and vice versa. ZnO nanomaterials have been a focal point of research due to their high surface-to-volume ratio and high reactivity. This study reported on the use of ZnO for coating agents in carbon fiber sensors. The novelty in this research is the composition of current, time, ethanol concentration, and pH electrolyte to produce the optimum composition of piezoelectric material. The process was conducted using an electrochemical method, which converts electrical energy into chemical energy through electro-deposition. This study considers four independent variables: electrolyte current (1.2 A and 1.4 A), electrolyte pH (2.0, 4.0, and 6.0), ethanol concentration (70% and 96%), and coating duration (90, 180, and 270 seconds). The results show that 1.4 A produces the highest average voltage, followed by electrolyte pH 6 and 70% ethanol concentration. The best coating time was 270 seconds producing the highest average voltage. Micro and SEM confirm that 1.4 A produced a thicker and more uniform layer compared to 1.2 A. High pH, 70% ethanol concentration, and longer coating time also contributed to the formation of thicker layers. XRD test shows that the layers formed had amorphous and hexagonal crystal structures. The average crystal diameter size varies depending on the combination of independent variables used in the coating process. With these results, piezoelectric has potential as a pulse sensor material.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2023-12-26</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/10493</dc:identifier>
	<dc:identifier>10.31603/mesi.10493</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 3 No. 2 (2023); 105-113</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/10493/4747</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Salahuddin Junus</dc:rights>
</oai_dc:dc>