Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Effect of friction reducing devices on wellbore formation

Mechanical Engineering for Society and Industry · Vol. 5 No. 1 (2025) · hlm. 62–70

DOI
10.31603/mesi.11381
ISSN
2798-5245
Terbit
2025-03-09
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

Friction is one of the unavoidable factors during drilling. If not properly managed, it can significantly reduce the rate of penetration (ROP), especially in horizontal wells. This research aims to examine the effectiveness of the Friction Reduction Tool (FRT) in managing friction without causing damage to the formation. The FRT is designed to reduce friction between the drill string and the wellbore by minimizing contact. However, its performance is often influenced by two main factors: formation characteristics and drilling parameters. This study analyzes Well X-4, which was drilled without FRT, and Well X-5, which was drilled with FRT from a depth of 2837 m (MD). The analysis focuses on the tool’s impact on stick-slip issues, ROP, and mechanical specific energy (MSE). The results indicate that the use of FRT reduced stick-slip levels and MSE, enabling the drill bit to penetrate the formation more easily. Additionally, activating the FRT from the start increased the penetration rate by 18% compared to drilling without it. These findings suggest that the FRT effectively enhances the drilling rate while preserving the formation integrity.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 159 tautan kepenulisan bersama · 57 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Trisakti
  • Institut Teknologi Sains Bandung
  • Chulalongkorn University
  • Universitas Bhayangkara Jakarta Raya
  • Andalas University
  • Nazarbayev University
  • Bandung Institute of Technology
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dwi Atty MardianaUniversitas Trisakti4
Pri Agung RakhmantoUniversitas Trisakti4
Sonny IrawanNazarbayev University3
Yarra SutadiwiriaUniversitas Trisakti2
Onnie Ridaliani PrapansyaUniversitas Trisakti2
Fajri MaulidaUniversitas Trisakti2
Andrian SutiadiUniversitas Trisakti2
Arinda RistawatiUniversitas Trisakti2
Muhammad Dzaki ArkaanUniversitas Trisakti2
Taufan MarhaendrajanaBandung Institute of Technology1
Sonny Sonny IrawanAfiliasi tidak diketahui1
Asri NugrahantiUniversitas Trisakti1
Imam Setiaji RonoatmojoUniversitas Trisakti1
Dewi SyavitriUniversitas Trisakti1
P R CahyaningratriUniversitas Trisakti1
Barona BelladestaUniversitas Trisakti1
Yeftamikha YeftamikhaUniversity of Auckland1
Andy LivseyAfiliasi tidak diketahui1
Komaidi NotonegoroAfiliasi tidak diketahui1
Muhammad Taufiq FathaddinUniversitas Trisakti1
Widia YantiChulalongkorn University1
Onnie RidalianiUniversitas Trisakti1
SamsolUniversitas Trisakti1
Lilian AnggelaUniversitas Trisakti1
Andry PrimaUniversitas Trisakti1
Nandito DavyKing Fahd University of Petroleum and Minerals1
Wydhea Ayu SeptianingrumUniversitas Trisakti1
Ridho AbdillahUniversitas Trisakti1
Falza Izza WihdanyInstitut Teknologi Sains Bandung1
Berkah HaniUniversitas Bhayangkara Jakarta Raya1
Wahyu SutresnoUniversitas Bhayangkara Jakarta Raya1
Wiwiek JumiatiInstitut Teknologi Sains Bandung1
Hawa Syuraih GhaziyahInstitut Teknologi Sains Bandung1
Karyanto HerlambangInstitut Teknologi Sains Bandung1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Effect of friction reducing devices on wellbore formation</dc:title>
	<dc:creator xml:lang="en">Setiati, Rini</dc:creator>
	<dc:creator xml:lang="en">Samosir, Samuel Melvern L P</dc:creator>
	<dc:creator xml:lang="en">Fathaddin, Muhammad Taufiq</dc:creator>
	<dc:creator xml:lang="en">Rakhmanto, Priagung</dc:creator>
	<dc:creator xml:lang="en">Susanti, Oknovia</dc:creator>
	<dc:creator xml:lang="en">Yanti, Widia</dc:creator>
	<dc:subject xml:lang="en">Friction Reduction Tool;</dc:subject>
	<dc:subject xml:lang="en">Stick-Slip;</dc:subject>
	<dc:subject xml:lang="en">Rate of Penetration</dc:subject>
	<dc:subject xml:lang="en">Mechanical Specific Energy</dc:subject>
	<dc:description xml:lang="en">Friction is one of the unavoidable factors during drilling. If not properly managed, it can significantly reduce the rate of penetration (ROP), especially in horizontal wells. This research aims to examine the effectiveness of the Friction Reduction Tool (FRT) in managing friction without causing damage to the formation. The FRT is designed to reduce friction between the drill string and the wellbore by minimizing contact. However, its performance is often influenced by two main factors: formation characteristics and drilling parameters. This study analyzes Well X-4, which was drilled without FRT, and Well X-5, which was drilled with FRT from a depth of 2837 m (MD). The analysis focuses on the tool’s impact on stick-slip issues, ROP, and mechanical specific energy (MSE). The results indicate that the use of FRT reduced stick-slip levels and MSE, enabling the drill bit to penetrate the formation more easily. Additionally, activating the FRT from the start increased the penetration rate by 18% compared to drilling without it. These findings suggest that the FRT effectively enhances the drilling rate while preserving the formation integrity.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-03-09</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/11381</dc:identifier>
	<dc:identifier>10.31603/mesi.11381</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 5 No. 1 (2025); 62-70</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/11381/5735</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Rini Setiati, Samuel Melvern L P Samosir, Muhammad Taufiq Fathaddin, Priagung Rakhmanto, Oknovia Susanti, Widia Yanti</dc:rights>
</oai_dc:dc>