Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Optimization of air suspension system for improved ride and handling performance in road vehicles dynamic

Mechanical Engineering for Society and Industry · Vol. 4 No. 2 (2024) · hlm. 277–293

DOI
10.31603/mesi.11634
ISSN
2798-5245
Terbit
2024-12-15
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

This study focused on the optimization of air suspension systems (ASs) for road vehicles concerning on-ride and handling criteria. A quarter DOF vehicle model is used in this study to develop an optimized system based on nonlinear equations. The extracted equations are then linearized and transformed into dimensionless form to gain insights into the system's behavior. By employing the Root-Mean-Square (RMS) method, the dimensionless equations are utilized to optimize the system parameters focused on stability and ride comfort. The five main components are attached in the model which consisted of the sprung mass (SM), unsprung mass (USM), gas spring (GS), auxiliary reservoir (AR), and orifice (O). The optimization procedure involved adjustment to the orifice resistance coefficient, air spring volume, air spring area, and auxiliary volume using the RMS-based method. Simulation analysis revealed the superior performance of the RMS-optimized system in both ride quality and handling. The study concludes by emphasizing the advantages of utilizing the RMS method for optimizing air suspension, resulting in decreased sprung mass acceleration and enhanced handling qualities. Selecting the appropriate design point for the suspension system based on the method outlined in this article can ensure both stability and comfort in the vehicle simultaneously.

Kata kunci

Jaringan kolaborasi para penulis

7 penulis · 13 tautan kepenulisan bersama · 8 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Pembangunan Nasional Veteran Jakarta
  • Islamic Azad University, Tehran
  • De Montfort University
  • Universitas Halu Oleo
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Munirwan ZaniUniversitas Halu Oleo1
Bahari AbdullahAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Optimization of air suspension system for improved ride and handling performance in road vehicles dynamic</dc:title>
	<dc:creator xml:lang="en">Armansyah, Armansyah</dc:creator>
	<dc:creator xml:lang="en">Keshavarzi, Ahmad</dc:creator>
	<dc:creator xml:lang="en">Kolahdooz, Amin</dc:creator>
	<dc:creator xml:lang="en">Ferdyanto, Ferdyanto</dc:creator>
	<dc:creator xml:lang="en">Mardhani, Muhammad Destri</dc:creator>
	<dc:subject xml:lang="en">Air suspension system</dc:subject>
	<dc:subject xml:lang="en">Optimization</dc:subject>
	<dc:subject xml:lang="en">Ride comfort</dc:subject>
	<dc:subject xml:lang="en">Handling performance</dc:subject>
	<dc:subject xml:lang="en">Root-Mean-Square method</dc:subject>
	<dc:description xml:lang="en">This study focused on the optimization of air suspension systems (ASs) for road vehicles concerning on-ride and handling criteria. A quarter DOF vehicle model is used in this study to develop an optimized system based on nonlinear equations. The extracted equations are then linearized and transformed into dimensionless form to gain insights into the system's behavior. By employing the Root-Mean-Square (RMS) method, the dimensionless equations are utilized to optimize the system parameters focused on stability and ride comfort. The five main components are attached in the model which consisted of the sprung mass (SM), unsprung mass (USM), gas spring (GS), auxiliary reservoir (AR), and orifice (O). The optimization procedure involved adjustment to the orifice resistance coefficient, air spring volume, air spring area, and auxiliary volume using the RMS-based method. Simulation analysis revealed the superior performance of the RMS-optimized system in both ride quality and handling. The study concludes by emphasizing the advantages of utilizing the RMS method for optimizing air suspension, resulting in decreased sprung mass acceleration and enhanced handling qualities. Selecting the appropriate design point for the suspension system based on the method outlined in this article can ensure both stability and comfort in the vehicle simultaneously.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2024-12-15</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/11634</dc:identifier>
	<dc:identifier>10.31603/mesi.11634</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 4 No. 2 (2024); 277-293</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/11634/5551</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Armansyah Armansyah, Amin Kolahdooz, Reda Rizal, Muhammad Destri Mardhani</dc:rights>
</oai_dc:dc>