Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Optimized deposition parameters for titanium nitride coatings: Enhancing mechanical properties of Al 6011 substrates via DC sputtering

Mechanical Engineering for Society and Industry · Vol. 4 No. 2 (2024) · hlm. 252–262

DOI
10.31603/mesi.12266
ISSN
2798-5245
Terbit
2024-12-15
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

The growing demand for advanced coatings in industries such as aerospace and automotive necessitates materials with superior hardness, wear resistance, and thermal stability. Despite advancements in ternary coatings, research on binary Titanium Nitride (TiN) coatings remains limited, particularly in optimizing deposition parameters for lightweight aluminum substrates. This study aims to investigate the effects of sputtering parameters, specifically Ar:N₂ gas ratios and deposition durations, on the mechanical properties of TiN coatings on Al 6011 substrates. The optimized conditions (70Ar:30N₂ gas ratio and 60-minute deposition) yielded a 165% increase in surface hardness (88.92 HV) and a 54% reduction in wear rate compared to untreated samples. XRD and SEM analyses confirmed the dense microstructure and strong (200) phase orientation contributing to these enhancements. This research highlights a cost-effective and scalable approach to improving the performance of aluminum alloys, bridging the gap between fundamental studies and industrial applications.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 144 tautan kepenulisan bersama · 82 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Brawijaya
  • National Research and Innovation Agency
  • Kementerian Pemuda dan Olahraga Republik Indonesia
  • Universitas Gadjah Mada
  • State University of Malang
  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • Jenderal Soedirman University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Rudianto RaharjoUniversity of Brawijaya3
Redi BintartoUniversity of Brawijaya3
Putu Hadi SetyariniUniversity of Brawijaya2
Sugiarto SugiartoUniversity of Brawijaya2
Mirza Hapsari Sakti Titis PenggalihUniversitas Gadjah Mada1
Raden IsnantaKementerian Pemuda dan Olahraga Republik Indonesia1
Bayu RahadianKementerian Pemuda dan Olahraga Republik Indonesia1
Dadi SujadiKementerian Pemuda dan Olahraga Republik Indonesia1
Sifa Aulia WicaksariJenderal Soedirman University1
Vigur Dinda Yulia ReswatiUniversitas Gadjah Mada1
Sinta IndriyaniUniversitas Gadjah Mada1
Ibtidau NiamilahUniversitas 'Aisyiyah Yogyakarta1
Maykel ManawanAfiliasi tidak diketahui1
Andoko AndokoState University of Malang1
Heru SuryantoState University of Malang1
Rifqi Ryandi Dwi AnantoState University of Malang1
Rizalman MamatUniversiti Malaysia Pahang Al-Sultan Abdullah1
Mohd Fairusham GhazaliUniversiti Malaysia Pahang Al-Sultan Abdullah1
Galang Sandy PrayogoPoliteknik Negeri Banyuwangi1
Agus NugrohoNational Research and Innovation Agency1
Jackly MuribanAfiliasi tidak diketahui1
Angga SaputraPoliteknik Negeri Samarinda1
Slamet Prasetyo UtomoUniversity of Brawijaya1
Marco TaliceEngineering (Italy)1
Asri AnjasariUniversity of Brawijaya1
Arif WahyudionoPoliteknik Negeri Jember1
Muhammad Zaimi Zainal AbidinUniversiti Teknikal Malaysia Melaka1
Muhammad Latifur RochmanUniversitas Muhammadiyah Magelang1
Winarto WinartoUniversity of Brawijaya1
Nurkholis HamidiUniversity of Brawijaya1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Optimized deposition parameters for titanium nitride coatings: Enhancing mechanical properties of Al 6011 substrates via DC sputtering</dc:title>
	<dc:creator xml:lang="en">Margono, Margono</dc:creator>
	<dc:creator xml:lang="en">Darmadi, Djarot Bangun</dc:creator>
	<dc:creator xml:lang="en">Gapsari, Femiana</dc:creator>
	<dc:creator xml:lang="en">Widodo, Teguh Dwi</dc:creator>
	<dc:creator xml:lang="en">Kozin, Muhammad</dc:creator>
	<dc:creator xml:lang="en">Puranto, Prabowo</dc:creator>
	<dc:creator xml:lang="en">Kamil, Muhammad Prisla</dc:creator>
	<dc:creator xml:lang="en">Fitriani, Diah Ayu</dc:creator>
	<dc:creator xml:lang="en">Azahra, Siti Amalina</dc:creator>
	<dc:creator xml:lang="en">Andriyanti, Wiwien</dc:creator>
	<dc:subject xml:lang="en">6011 Al alloy</dc:subject>
	<dc:subject xml:lang="en">DC sputtering</dc:subject>
	<dc:subject xml:lang="en">TiN</dc:subject>
	<dc:subject xml:lang="en">Mechanical properties</dc:subject>
	<dc:subject xml:lang="en">Microstructure</dc:subject>
	<dc:description xml:lang="en">The growing demand for advanced coatings in industries such as aerospace and automotive necessitates materials with superior hardness, wear resistance, and thermal stability. Despite advancements in ternary coatings, research on binary Titanium Nitride (TiN) coatings remains limited, particularly in optimizing deposition parameters for lightweight aluminum substrates. This study aims to investigate the effects of sputtering parameters, specifically Ar:N₂ gas ratios and deposition durations, on the mechanical properties of TiN coatings on Al 6011 substrates. The optimized conditions (70Ar:30N₂ gas ratio and 60-minute deposition) yielded a 165% increase in surface hardness (88.92 HV) and a 54% reduction in wear rate compared to untreated samples. XRD and SEM analyses confirmed the dense microstructure and strong (200) phase orientation contributing to these enhancements. This research highlights a cost-effective and scalable approach to improving the performance of aluminum alloys, bridging the gap between fundamental studies and industrial applications.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2024-12-15</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/12266</dc:identifier>
	<dc:identifier>10.31603/mesi.12266</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 4 No. 2 (2024); 252-262</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/12266/5524</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Margono Margono, Djarot Bangun Darmadi, Femiana Gapsari, Teguh Dwi Widodo, Muhammad Kozin, Ika Maria Ulfah, Prabowo Puranto, Muhammad Prisla Kamil, Diah Ayu Fitriani, Siti Amalina Azahra, Wiwien Andriyanti</dc:rights>
</oai_dc:dc>