Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Advanced computational techniques for predicting 3D printing distortion in selective laser melting processes of Aluminium AlSi10Mg

Mechanical Engineering for Society and Industry · Vol. 5 No. 1 (2025) · hlm. 158–168

DOI
10.31603/mesi.12581
ISSN
2798-5245
Terbit
2025-06-27
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

Distortion for 3D printing using Selective Laser Melting (SLM) on AlSi10Mg aluminium is an important issue that affects the final manufactured product. This research aims to develop a finite element method (FEM)-based computational simulation and experimental validation to predict distortion in 3D printed products using SLM. The study results found that the variation of 3D printing position affects the resulting product's distortion and mechanical properties. The 90° part print position results in smaller distortion of 0.303 and 0.335 mm than the 0° part print position of 0.329 and 0.378, respectively, making it more suitable for high-precision applications. This study confirms the importance of scan orientation in controlling distortion in the SLM process, which can be used as a guide for optimal printing parameters. With proper orientation selection, the risk of distortion or defects in SLM products can be minimised, and industrial production efficiency can be improved.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 113 tautan kepenulisan bersama · 29 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Brawijaya
  • Institut Teknologi Sepuluh Nopember
  • Politeknik Penerbangan Surabaya
  • University of Warwick
  • Khairun University
  • Sekolah Tinggi Teknologi Warga Surakarta
  • Universitas Merdeka Madiun
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Muhammad Vendy HermawanSekolah Tinggi Teknologi Warga Surakarta4
Winarto WinartoUniversity of Brawijaya4
A’yan SabitahKhairun University3
Brillian Aristyo RahardianUniversity of Brawijaya2
Dyan Putri MahardikaUniversity of Brawijaya2
Wayan Firdaus MahmudyUniversity of Brawijaya2
Agus Wahyu WidodoUniversity of Brawijaya2
Setyo Hariyadi Suranto PutroAfiliasi tidak diketahui2
Ahmad Hamim SuudyAfiliasi tidak diketahui2
Ridwan RidwanUniversitas Merdeka Madiun2
Bambang JunipitoyoPoliteknik Penerbangan Surabaya2
Wijaya KurniawanUniversity of Brawijaya1
Eko SetiawanUniversity of Brawijaya1
Imam CholissodinUniversity of Brawijaya1
Tusty Nadia MaghfiraUniversity of Brawijaya1
Amalia Kartika A.Afiliasi tidak diketahui1
Dwi Angraeni K.University of Brawijaya1
Hurriyatul FitriyahUniversity of Brawijaya1
Benny AdiwijayaUniversity of Brawijaya1
Diah WulandariInstitut Teknologi Sepuluh Nopember1
Harus Laksana GunturInstitut Teknologi Sepuluh Nopember1
Sigit Tri WicaksonoInstitut Teknologi Sepuluh Nopember1
Indriati IndriatiUniversity of Brawijaya1
Nathan DaudUniversity of Brawijaya1
Kohei AraiSaga University1
Marji MarjiUniversity of Brawijaya1
Ariawan AdimoeljaUniversity of Brawijaya1
Satrio Hadi WijoyoUniversity of Brawijaya1
Satrio Agung WicaksonoUniversity of Brawijaya1
Tri AfiriantoUniversity of Brawijaya1
Fatmawati FatmawatiUniversity of Brawijaya1
Mochammad Chandra SaputraUniversity of Brawijaya1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Advanced computational techniques for predicting 3D printing distortion in selective laser melting processes of Aluminium AlSi10Mg</dc:title>
	<dc:creator xml:lang="en">Choiron, Moch. Agus</dc:creator>
	<dc:creator xml:lang="en">Purnowidodo, Anindito</dc:creator>
	<dc:creator xml:lang="en">Zacoeb, Achfas</dc:creator>
	<dc:creator xml:lang="en">Setyawan, Gembong Edhi</dc:creator>
	<dc:creator xml:lang="en">Wirawan, Willy Artha</dc:creator>
	<dc:creator xml:lang="en">Ariadi, Yudhi</dc:creator>
	<dc:creator xml:lang="en">Rennie, Allan E.W.</dc:creator>
	<dc:creator xml:lang="en">Kurnianingtyas, Diva</dc:creator>
	<dc:subject xml:lang="en">SLM</dc:subject>
	<dc:subject xml:lang="en">Laser Powder</dc:subject>
	<dc:subject xml:lang="en">3D Printing</dc:subject>
	<dc:subject xml:lang="en">Distortion</dc:subject>
	<dc:subject xml:lang="en">Additive Manufacturing</dc:subject>
	<dc:subject xml:lang="en">Finite Element Method</dc:subject>
	<dc:description xml:lang="en">Distortion for 3D printing using Selective Laser Melting (SLM) on AlSi10Mg aluminium is an important issue that affects the final manufactured product. This research aims to develop a finite element method (FEM)-based computational simulation and experimental validation to predict distortion in 3D printed products using SLM. The study results found that the variation of 3D printing position affects the resulting product's distortion and mechanical properties. The 90° part print position results in smaller distortion of 0.303 and 0.335 mm than the 0° part print position of 0.329 and 0.378, respectively, making it more suitable for high-precision applications. This study confirms the importance of scan orientation in controlling distortion in the SLM process, which can be used as a guide for optimal printing parameters. With proper orientation selection, the risk of distortion or defects in SLM products can be minimised, and industrial production efficiency can be improved.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-06-27</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/12581</dc:identifier>
	<dc:identifier>10.31603/mesi.12581</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 5 No. 1 (2025); 158-168</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/12581/5888</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Moch. Agus Choiron, Anindito Purnowidodo, Achfas Zacoeb, Gembong Edhi Setyawan, Willy Artha Wirawan, Yudhi Ariadi, Allan E.W. Rennie, Diva Kurnianingtyas</dc:rights>
</oai_dc:dc>