Jurnal
SINTA 1
Combustion characteristics of pyrolysis oil droplets from pyrolysis of polyethylene (PE) plastic waste
Mechanical Engineering for Society and Industry · Vol. 5 No. 1 (2025) · hlm. 125–132
ISSN 2798-5245
Terbit 2025-03-09
Penerbit Universitas Muhammadiyah Magelang
Bahasa en
Abstrak
Plastic waste is suspected to be a major contributor to environmental pollution, thus encouraging the need for innovative and effective management strategies to overcome it. Pyrolysis is considered an affordable way to process plastic waste, and even produce useful products in liquid form, which has the potential to be an alternative fuel in combustion engines. This study evaluated the combustion characteristics of pyrolysis oil derived from polyethylene (PE) plastic waste. The pyrolysis process was carried out under controlled conditions, at a furnace temperature of 250 °C, a reactor temperature of 400 °C, and a condenser temperature of 300 °C, processing 1 kg of PE plastic waste. Temperature data was monitored every 10 minutes by installing several thermocouples. The pyrolysis process was able to produce 671 ml of liquid, which was later identified as plastic pyrolysis oil (PPO PE-11) and the rest in the form of residue reached 45 g. The results indicated that PPO PE-11 has a viscosity of 5.93 mm²/s which is higher than diesel 3.8173 mm²/s. Meanwhile, its density is 0.779 kg/m³, which is slightly lower than diesel. The calorific value of PPO PE-11 is slightly higher than diesel, reaching 11,046.4 cal/g. The droplet scale combustion tests give a shorter ignition delay of 0.6 seconds at 41.28 °C for PPO PE-11, compared to 1 second at 52.525 °C for diesel, indicating its flammability.
Jaringan kolaborasi para penulis
13 penulis ·
25 tautan kepenulisan bersama
· 8 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Muhammadiyah University of Surakarta University of Sarjanawiyata Tamansiswa Institut Teknologi Nasional Yogyakarta National Taiwan University of Science and Technology Politeknik Negeri Bali Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en">Combustion characteristics of pyrolysis oil droplets from pyrolysis of polyethylene (PE) plastic waste</dc:title>
<dc:creator xml:lang="en">Aji, Dody Bimo</dc:creator>
<dc:creator xml:lang="en">Effendy, Marwan</dc:creator>
<dc:creator xml:lang="en">Ngafwan, Ngafwan</dc:creator>
<dc:subject xml:lang="en">Alternative fuel</dc:subject>
<dc:subject xml:lang="en">PE waste</dc:subject>
<dc:subject xml:lang="en">PE plastic waste</dc:subject>
<dc:subject xml:lang="en">Plastic pyrolysis oil</dc:subject>
<dc:description xml:lang="en">Plastic waste is suspected to be a major contributor to environmental pollution, thus encouraging the need for innovative and effective management strategies to overcome it. Pyrolysis is considered an affordable way to process plastic waste, and even produce useful products in liquid form, which has the potential to be an alternative fuel in combustion engines. This study evaluated the combustion characteristics of pyrolysis oil derived from polyethylene (PE) plastic waste. The pyrolysis process was carried out under controlled conditions, at a furnace temperature of 250 °C, a reactor temperature of 400 °C, and a condenser temperature of 300 °C, processing 1 kg of PE plastic waste. Temperature data was monitored every 10 minutes by installing several thermocouples. The pyrolysis process was able to produce 671 ml of liquid, which was later identified as plastic pyrolysis oil (PPO PE-11) and the rest in the form of residue reached 45 g. The results indicated that PPO PE-11 has a viscosity of 5.93 mm²/s which is higher than diesel 3.8173 mm²/s. Meanwhile, its density is 0.779 kg/m³, which is slightly lower than diesel. The calorific value of PPO PE-11 is slightly higher than diesel, reaching 11,046.4 cal/g. The droplet scale combustion tests give a shorter ignition delay of 0.6 seconds at 41.28 °C for PPO PE-11, compared to 1 second at 52.525 °C for diesel, indicating its flammability.</dc:description>
<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
<dc:date>2025-03-09</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/12763</dc:identifier>
<dc:identifier>10.31603/mesi.12763</dc:identifier>
<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 5 No. 1 (2025); 125-132</dc:source>
<dc:source>2798-5245</dc:source>
<dc:language>en</dc:language>
<dc:relation>https://journal.unimma.ac.id/mesi/article/view/12763/5826</dc:relation>
<dc:rights xml:lang="en">Copyright (c) 2025 Dody Bimo Aji, Marwan Effendy, Ngafwan Ngafwan</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
OpenAlex
Terindeks
lewat DOI
1 sitasi
Crossref
Belum diperiksa
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Aji, D. B., Effendy, M., & Ngafwan, N. (2025). Combustion characteristics of pyrolysis oil droplets from pyrolysis of polyethylene (PE) plastic waste. Mechanical Engineering for Society and Industry, 5(1), 125–132. https://doi.org/10.31603/mesi.12763
Salin
IEEE
D. B. Aji, M. Effendy, and N. Ngafwan, “Combustion characteristics of pyrolysis oil droplets from pyrolysis of polyethylene (PE) plastic waste,” Mechanical Engineering for Society and Industry, vol. 5, no. 1, pp. 125–132, 2025, doi: 10.31603/mesi.12763.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.