Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Stress distribution on the L1/L2 endplates under multiaxial loads: A finite element study

Mechanical Engineering for Society and Industry · Vol. 5 No. 1 (2025) · hlm. 182–189

DOI
10.31603/mesi.12843
ISSN
2798-5245
Terbit
2025-06-27
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

Understanding stress distribution on lumbar vertebral endplates is essential for predicting mechanical failure and guiding clinical interventions. Therefore, this study aims to investigate the von Mises stress patterns on the L1/L2 endplates under multiaxial loading using a 3-dimensional finite element (FE) model derived from CT imaging of a healthy 55-year-old male. Anatomical structures were reconstructed in Mimics 21.0, and simulations were conducted in ANSYS Workbench 2023 R2. Material properties for cortical bone, cancellous bone, and intervertebral disc were assigned based on validated biomechanical data. A compressive load of 500 N and multiaxial moments ranging from 2.5 to 10 N•m were applied to simulate physiological movements, while the inferior surface of L2 was fully constrained to reflect realistic boundary conditions. The results showed that the superior endplate experienced the highest von Mises stress, particularly during flexion and lateral bending, indicating increased vulnerability to mechanical overload. Extension loading significantly reduced stress on both endplates, with a 60.54% decrease on the superior endplate and 69.17% on the inferior endplate. Stress distribution was asymmetrical and was influenced by anatomical features, such as cortical thickness and trabecular alignment. These results show the superior endplate as a biomechanically critical region prone to degeneration, emphasizing its importance in implant design, preventive strategies, and risk assessment for microfracture in high-risk populations.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 160 tautan kepenulisan bersama · 68 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Semarang
  • Diponegoro University
  • Universiti Malaysia Sarawak
  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sultana MH FaradzDiponegoro University10
Agustini UtariDiponegoro University7
KriswantoState University of Semarang6
Rahmat Doni WidodoState University of Semarang5
J. JamariDiponegoro University5
JamariDiponegoro University4
KriswantoAfiliasi tidak diketahui3
DhiaulhaqueDiponegoro University3
Deni Fajar FitriyanaState University of Semarang3
Annastasia EdiatiDiponegoro University3
Irene Astrid LarasatiDiponegoro University3
Ruben Bayu KristiawanState University of Semarang2
Khoirul HudaState University of Semarang2
Febri Budi DarsonoState University of Semarang2
Mohd Syahmi JamaludinUniversiti Malaysia Sarawak2
Januar Parlaungan SiregarUniversiti Malaysia Pahang Al-Sultan Abdullah2
Gunagung syahrul nizam sulkanState University of Semarang1
Fadhil Putra RamadhanState University of Semarang1
Kaleb PriyantoState University of Semarang1
Rachael AndikaState University of Semarang1
Septian Eko CahyantoState University of Semarang1
Andrean Rachman RizaldyState University of Semarang1
Beni Aji SubektiState University of Semarang1
Muhammad Iqbal RamadhaniState University of Semarang1
Fatkhu AmanullohState University of Semarang1
Dzikra Adi PratamaState University of Semarang1
Dennis Andhara PutraState University of Semarang1
Nurul FatullohState University of Semarang1
Alifian Bagas SaputraState University of Semarang1
Septian Eko CahyonoState University of Semarang1
Hastaka Juan Pratama PutraState University of Semarang1
Agus PrasetyoDiponegoro University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Stress distribution on the L1/L2 endplates under multiaxial loads: A finite element study</dc:title>
	<dc:creator xml:lang="en">Wicaksono, Hasyid Ahmad</dc:creator>
	<dc:creator xml:lang="en">Rafli, Muhammad</dc:creator>
	<dc:creator xml:lang="en">Bilal, Muhamad</dc:creator>
	<dc:creator xml:lang="en">Lamura, M. Danny Pratama</dc:creator>
	<dc:creator xml:lang="en">Maula, Mohamad Izzur</dc:creator>
	<dc:creator xml:lang="en">Bayuseno, Athanasius Priharyoto</dc:creator>
	<dc:creator xml:lang="en">Winarni, Tri Indah</dc:creator>
	<dc:creator xml:lang="en">Jamari, Jamari</dc:creator>
	<dc:subject xml:lang="en">Finite element analysis</dc:subject>
	<dc:subject xml:lang="en">Lumbar spine</dc:subject>
	<dc:subject xml:lang="en">Multiaxial loading</dc:subject>
	<dc:subject xml:lang="en">Endplate stress</dc:subject>
	<dc:subject xml:lang="en">L1–L2 segment</dc:subject>
	<dc:description xml:lang="en">Understanding stress distribution on lumbar vertebral endplates is essential for predicting mechanical failure and guiding clinical interventions. Therefore, this study aims to investigate the von Mises stress patterns on the L1/L2 endplates under multiaxial loading using a 3-dimensional finite element (FE) model derived from CT imaging of a healthy 55-year-old male. Anatomical structures were reconstructed in Mimics 21.0, and simulations were conducted in ANSYS Workbench 2023 R2. Material properties for cortical bone, cancellous bone, and intervertebral disc were assigned based on validated biomechanical data. A compressive load of 500 N and multiaxial moments ranging from 2.5 to 10 N•m were applied to simulate physiological movements, while the inferior surface of L2 was fully constrained to reflect realistic boundary conditions. The results showed that the superior endplate experienced the highest von Mises stress, particularly during flexion and lateral bending, indicating increased vulnerability to mechanical overload. Extension loading significantly reduced stress on both endplates, with a 60.54% decrease on the superior endplate and 69.17% on the inferior endplate. Stress distribution was asymmetrical and was influenced by anatomical features, such as cortical thickness and trabecular alignment. These results show the superior endplate as a biomechanically critical region prone to degeneration, emphasizing its importance in implant design, preventive strategies, and risk assessment for microfracture in high-risk populations.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-06-27</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/12843</dc:identifier>
	<dc:identifier>10.31603/mesi.12843</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 5 No. 1 (2025); 182-189</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/12843/5889</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Hasyid Ahmad Wicaksono, Muhammad Rafli, Muhamad Bilal, M. Danny Pratama Lamura, Mohamad Izzur Maula, Athanasius Priharyoto Bayuseno, Tri Indah Winarni, Jamari Jamari</dc:rights>
</oai_dc:dc>