Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Eliminating compressed air leaks in production process on compressor machine using TRIZ decision making – A case study in Somaliland company

Mechanical Engineering for Society and Industry · Vol. 5 No. 1 (2025) · hlm. 230–244

DOI
10.31603/mesi.13017
ISSN
2798-5245
Terbit
2025-06-29
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

In Somaliland, electricity is an expensive necessity. The high expense of electricity presents challenges for industrial development in Somaliland. Existing industries must operate efficiently to survive, specifically in the manufacturing sector, which relies heavily on electrical machinery. The compressor is widely used in manufacturing to provide the air supply to production machines, including CNC machines. However, in some cases, the air supply from the compressor is not supplied efficiently due to air leakage in standby mode. This research aims to solve this issue by implementing an integrated system that reduces energy waste caused by compressed air leakage during standby mode. This research is grounded in the application of the TRIZ contradiction matrix, which identified Inventive Principle #28 (Mechanics Substitution) as a potential solution. The proposed solution was subsequently implemented and evaluated using a pilot experimental method within the context of a case study conducted at a manufacturing company located in Hargeisa, Somaliland. The result led to the successful implementation and testing of a control system that integrated the operations of the compressor machine and CNC machine. Compared to the conventional ball valve components, the new system replaced it with an automatic air control valve integrated with the CNC machine emergency button. Electricity consumption on the compressor machine was observed and calculated for twelve months before improvement and twelve months after implementing the improvements. The data was collected for a total of 24 months to compare before improvements and after improvements for each 12 months in a machine. The improvements showed a significant reduction in electricity consumption, from 10,982 kWh to 9,830 kWh representing 10.49% energy savings, and reduced electricity operating costs by SOS 605,952 (USD 1,067) in 12 months.

Kata kunci

Jaringan kolaborasi para penulis

9 penulis · 20 tautan kepenulisan bersama · 17 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Yogyakarta State University
  • Universitas Gadjah Mada
  • Gollis University
  • National Chung Hsing University
  • University of Hargeisa
  • Admas University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Darmono DarmonoYogyakarta State University1
Khakam Ma'rufYogyakarta State University1
Indra Dwi SuryantoUniversitas Gadjah Mada1
Andi Tri HermawanYogyakarta State University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Eliminating compressed air leaks in production process on compressor machine using TRIZ decision making – A case study in Somaliland company</dc:title>
	<dc:creator xml:lang="en">Ahmed, Nagib Ismail</dc:creator>
	<dc:creator xml:lang="en">Setiawan, Rizal Justian</dc:creator>
	<dc:creator xml:lang="en">Ma’ruf, Khakam</dc:creator>
	<dc:creator xml:lang="en">Abdikadir, Mubarik</dc:creator>
	<dc:creator xml:lang="en">Mohamed, Keisa Abdi</dc:creator>
	<dc:subject xml:lang="en">Air valve</dc:subject>
	<dc:subject xml:lang="en">Compressor</dc:subject>
	<dc:subject xml:lang="en">CNC machine</dc:subject>
	<dc:subject xml:lang="en">Control</dc:subject>
	<dc:subject xml:lang="en">Energy</dc:subject>
	<dc:description xml:lang="en">In Somaliland, electricity is an expensive necessity. The high expense of electricity presents challenges for industrial development in Somaliland. Existing industries must operate efficiently to survive, specifically in the manufacturing sector, which relies heavily on electrical machinery. The compressor is widely used in manufacturing to provide the air supply to production machines, including CNC machines. However, in some cases, the air supply from the compressor is not supplied efficiently due to air leakage in standby mode. This research aims to solve this issue by implementing an integrated system that reduces energy waste caused by compressed air leakage during standby mode. This research is grounded in the application of the TRIZ contradiction matrix, which identified Inventive Principle #28 (Mechanics Substitution) as a potential solution. The proposed solution was subsequently implemented and evaluated using a pilot experimental method within the context of a case study conducted at a manufacturing company located in Hargeisa, Somaliland. The result led to the successful implementation and testing of a control system that integrated the operations of the compressor machine and CNC machine. Compared to the conventional ball valve components, the new system replaced it with an automatic air control valve integrated with the CNC machine emergency button. Electricity consumption on the compressor machine was observed and calculated for twelve months before improvement and twelve months after implementing the improvements. The data was collected for a total of 24 months to compare before improvements and after improvements for each 12 months in a machine. The improvements showed a significant reduction in electricity consumption, from 10,982 kWh to 9,830 kWh representing 10.49% energy savings, and reduced electricity operating costs by SOS 605,952 (USD 1,067) in 12 months.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-06-29</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/13017</dc:identifier>
	<dc:identifier>10.31603/mesi.13017</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 5 No. 1 (2025); 230-244</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/13017/5898</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Nagib Ismail Ahmed, Rizal Justian Setiawan, Khakam Ma’ruf; Mubarik Abdikadir; Keisa Abdi Mohamed</dc:rights>
</oai_dc:dc>