Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Investigation of discrepancies in isotropic material and structural properties in lattice frameworks

Mechanical Engineering for Society and Industry · Vol. 5 No. 1 (2025) · hlm. 245–256

DOI
10.31603/mesi.13018
ISSN
2798-5245
Terbit
2025-06-29
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

Lattice structures have developed as a vital component in advanced engineering applications due to their superior strength-to-weight ratios and adjustable mechanical properties. This paper focuses on examining the correlation between the isotropic features of lattices at the material level and their structural performance. The research used near-isotropic Crossing-cylinder (CC)- Body Centered Cubic (BCC) cells in various orientations and sizes. Both experimental analysis and finite element analysis were used to examine the compressive strength of the structure in each orientation. The results reveal that cell orientation is important for determining failure modes and mechanical performance at the structural level. At 0°, the lattice has higher compressive strength and energy absorption due to effective load transfer via CC-aligned struts. In contrast, higher orientations (e.g., 15°, 30°, and 45°) are dominated by collapse-type failures, indicating anisotropic behavior in an otherwise isotropic design. Smaller cell sizes have more strength at lower orientations due to their higher relative density, but larger cells perform better at higher orientations.

Kata kunci

Jaringan kolaborasi para penulis

25 penulis · 63 tautan kepenulisan bersama · 38 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Sepuluh Nopember
  • National Research and Innovation Agency
  • Universitas Negeri Surabaya
  • Sapienza University of Rome
  • Hokkaido University
  • Petra Christian University
  • National Cheng Kung University
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Arif WahjudiInstitut Teknologi Sepuluh Nopember4
Agung Prijo BudijonoUniversitas Negeri Surabaya2
I Nyoman SutantraInstitut Teknologi Sepuluh Nopember2
Mustasyar PerkasaNational Research and Innovation Agency1
Jean Mario ValentinoNational Research and Innovation Agency1
Achmad SyaifudinInstitut Teknologi Sepuluh Nopember1
Lukman ShalahuddinNational Research and Innovation Agency1
Katsuhiko SASAKIHokkaido University1
Ian Hardianto SiahaanPetra Christian University1
I Nyoman SutantraInstitut Teknologi Sepuluh Nopember1
Aris PurwantoUniversitas Negeri Surabaya1
Po-Hung LinNational Cheng Kung University1
Bambang SudarmantaInstitut Teknologi Sepuluh Nopember1
Dori YuvendaUniversitas Negeri Padang1
Rozy Aini HirowatiInstitut Teknologi Sepuluh Nopember1
Alief WikartaInstitut Teknologi Sepuluh Nopember1
Femiana GapsariUniversity of Brawijaya1
Chandya AndikusumaInstitut Teknologi Sepuluh Nopember1
Julendra Bambang AriatedjaInstitut Teknologi Sepuluh Nopember1
Sze Wei KhooTunku Abdul Rahman University of Management and Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Investigation of discrepancies in isotropic material and structural properties in lattice frameworks</dc:title>
	<dc:creator xml:lang="en">Arifin, Ahmad Anas</dc:creator>
	<dc:creator xml:lang="en">Batan, I Made Londen</dc:creator>
	<dc:creator xml:lang="en">Bici, Michele</dc:creator>
	<dc:creator xml:lang="en">Wahjudi, Arif</dc:creator>
	<dc:creator xml:lang="en">Pramono, Agus Sigit</dc:creator>
	<dc:subject xml:lang="en">Lattice structures</dc:subject>
	<dc:subject xml:lang="en">Isotropic</dc:subject>
	<dc:subject xml:lang="en">Compressive strength</dc:subject>
	<dc:subject xml:lang="en">Failure modes</dc:subject>
	<dc:description xml:lang="en">Lattice structures have developed as a vital component in advanced engineering applications due to their superior strength-to-weight ratios and adjustable mechanical properties. This paper focuses on examining the correlation between the isotropic features of lattices at the material level and their structural performance. The research used near-isotropic Crossing-cylinder (CC)- Body Centered Cubic (BCC) cells in various orientations and sizes. Both experimental analysis and finite element analysis were used to examine the compressive strength of the structure in each orientation. The results reveal that cell orientation is important for determining failure modes and mechanical performance at the structural level. At 0°, the lattice has higher compressive strength and energy absorption due to effective load transfer via CC-aligned struts. In contrast, higher orientations (e.g., 15°, 30°, and 45°) are dominated by collapse-type failures, indicating anisotropic behavior in an otherwise isotropic design. Smaller cell sizes have more strength at lower orientations due to their higher relative density, but larger cells perform better at higher orientations.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-06-29</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/13018</dc:identifier>
	<dc:identifier>10.31603/mesi.13018</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 5 No. 1 (2025); 245-256</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/13018/5899</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Ahmad Anas Arifin, I Made Londen Batan, Michele Bici, Arif Wahjudi, Agus Sigit Pramono</dc:rights>
</oai_dc:dc>