Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The stress corrosion cracking (SCC) susceptibility of the dissimilar ASTM A36 steels and 316L stainless steels welding in varied temperature of FeCl2

Mechanical Engineering for Society and Industry · Vol. 5 No. 1 (2025) · hlm. 206–216

DOI
10.31603/mesi.13161
ISSN
2798-5245
Terbit
2025-06-28
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

Obtaining perfect dissimilar welding joints which are exposed to corrosive environments still a problem up to now. The ASTM A36 and 316L stainless steels dissimilar metals were joined by means of Capacitive Discharge Welding (CDW). The welding parameters such as distance between metals, pressure, applied energy, and surface parameter were kept constant. The FeCl2 corrosive solution concentration also kept constant at 0.5M. The temperature of the solution was controlled at varied temperature, those are: 30 °C, 40 °C and 50 °C respectively. The resistance to the Stress Corrosion Cracking (SCC) load, was evaluated by time to fracture for certain dead tensile load and corrosive media. The SEM EDS data were retrieved to have deep insight of the SCC mechanism. The results show that, with 10 °C increasing temperature the SCC Threshold is decreased by 40% which are supported by the data of time to failure for certain load and also the SEM EDS.

Kata kunci

Jaringan kolaborasi para penulis

20 penulis · 74 tautan kepenulisan bersama · 34 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Brawijaya
  • National Research and Innovation Agency
  • Universitas Halu Oleo
  • Politeknik Negeri Samarinda
  • Engineering (Italy)
  • Kementerian Pemuda dan Olahraga Republik Indonesia
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Teguh Dwi WidodoUniversity of Brawijaya2
Dewi AnggrainiUniversitas Halu Oleo1
Juhaepa JuhaepaUniversitas Halu Oleo1
Margono MargonoKementerian Pemuda dan Olahraga Republik Indonesia1
Muhammad KozinNational Research and Innovation Agency1
Femiana GapsariUniversity of Brawijaya1
Prabowo PurantoNational Research and Innovation Agency1
M.P. KamilNational Research and Innovation Agency1
Diah Ayu FitrianiNational Research and Innovation Agency1
Siti Amalina AzahraNational Research and Innovation Agency1
Wiwien AndriyantiNational Research and Innovation Agency1
Rudianto RaharjoUniversity of Brawijaya1
Redi BintartoUniversity of Brawijaya1
Putu Hadi SetyariniUniversity of Brawijaya1
Sugiarto SugiartoUniversity of Brawijaya1
Sagita SagitaUniversity of Brawijaya1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The stress corrosion cracking (SCC) susceptibility of the dissimilar ASTM A36 steels and 316L stainless steels welding in varied temperature of FeCl2</dc:title>
	<dc:creator xml:lang="en">Darmadi, Djarot Bangun</dc:creator>
	<dc:creator xml:lang="en">Saputra, Angga</dc:creator>
	<dc:creator xml:lang="en">Utomo, Slamet Prasetyo</dc:creator>
	<dc:creator xml:lang="en">Talice, Marco</dc:creator>
	<dc:subject xml:lang="en">SCC susceptibility</dc:subject>
	<dc:subject xml:lang="en">SCC threshold</dc:subject>
	<dc:subject xml:lang="en">Dissimilar joints</dc:subject>
	<dc:subject xml:lang="en">Capacitive discharge</dc:subject>
	<dc:subject xml:lang="en">Welding FeCl2</dc:subject>
	<dc:description xml:lang="en">Obtaining perfect dissimilar welding joints which are exposed to corrosive environments still a problem up to now. The ASTM A36 and 316L stainless steels dissimilar metals were joined by means of Capacitive Discharge Welding (CDW). The welding parameters such as distance between metals, pressure, applied energy, and surface parameter were kept constant. The FeCl2 corrosive solution concentration also kept constant at 0.5M. The temperature of the solution was controlled at varied temperature, those are: 30 °C, 40 °C and 50 °C respectively. The resistance to the Stress Corrosion Cracking (SCC) load, was evaluated by time to fracture for certain dead tensile load and corrosive media. The SEM EDS data were retrieved to have deep insight of the SCC mechanism. The results show that, with 10 °C increasing temperature the SCC Threshold is decreased by 40% which are supported by the data of time to failure for certain load and also the SEM EDS.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-06-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/13161</dc:identifier>
	<dc:identifier>10.31603/mesi.13161</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 5 No. 1 (2025); 206-216</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/13161/5896</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Djarot Bangun Darmadi, Angga Saputra, Slamet Prasetyo Utomo, Marco Talice</dc:rights>
</oai_dc:dc>