Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Evaluation of dimensional accuracy on SLM product using 3D laser scanner

Mechanical Engineering for Society and Industry · Vol. 5 No. 2 (2025) · hlm. 342–352

DOI
10.31603/mesi.13448
ISSN
2798-5245
Terbit
2025-12-28
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

Dimensional accuracy is a critical factor in additive manufacturing, especially in Selective Laser Melting (SLM). Recently, many studies had investigated the SLM process and products, but studies on the evaluation of SLM printing product to check the dimensional accuracy have not been explored. This study investigates the dimensional accuracy of SLM products by employing a 3D laser scanning technology and evaluate the compatibility between CAD designs and the final SLM printed products. The 3D laser scanning is performed using a high-precision 3D laser scanner, then continued by comparison with the CAD model through Geomagic Control X software. Dimensional accuracy was measured using visual and statistical parameters such as color graphic and deviation. Results showed that deviation of SLM printed products was within the tolerance range of ±0.1 mm. The main factors that affect accuracy are printing laser speed and print orientation. The 3D laser scanning technology proved to be effective for evaluating the dimensional accuracy of SLM printed products. This study contributes to develop the quality control methods in the field of metal-based additive manufacturing.

Kata kunci

Jaringan kolaborasi para penulis

35 penulis · 115 tautan kepenulisan bersama · 57 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Brawijaya
  • Institut Teknologi Sepuluh Nopember
  • Politeknik Pelayaran Surabaya
  • Institut Teknologi Nasional Malang
  • Politeknik Penerbangan Surabaya
  • Khairun University
  • Universitas Nahdlatul Ulama Blitar
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Muhammad Vendy HermawanSekolah Tinggi Teknologi Warga Surakarta4
Winarto WinartoUniversity of Brawijaya4
Gembong Edhi SetyawanUniversity of Brawijaya4
Diva KurnianingtyasUniversity of Brawijaya4
Allan E.W. RennieAfiliasi tidak diketahui4
Yudhi AriadiUniversity of Warwick4
A’yan SabitahKhairun University3
Agus Dwi KorawanSekolah Tinggi Teknologi Ronggolawe Cepu2
Setyo Hariyadi Suranto PutroAfiliasi tidak diketahui2
Ahmad Hamim SuudyAfiliasi tidak diketahui2
Ridwan RidwanUniversitas Merdeka Madiun2
Bambang JunipitoyoPoliteknik Penerbangan Surabaya2
Dian Julianto WahyudiAfiliasi tidak diketahui1
Adhan EfendiPoliteknik Negeri Subang1
Dian Julianto WahyudiState University of Malang1
Diah WulandariInstitut Teknologi Sepuluh Nopember1
Harus Laksana GunturInstitut Teknologi Sepuluh Nopember1
Sigit Tri WicaksonoInstitut Teknologi Sepuluh Nopember1
Muhammad Ibnul AbidinInstitut Teknologi Nasional Malang1
Agus PrawotoPoliteknik Pelayaran Surabaya1
Monika Retno GunartiPoliteknik Pelayaran Surabaya1
Wahyu Nur FauziPoliteknik Pelayaran Surabaya1
Dyah RiandadariAfiliasi tidak diketahui1
Rusmini Sri MaryatiAfiliasi tidak diketahui1
Dewi PuspitasariUniversitas Negeri Surabaya1
Mukhlis MusliminKhairun University1
Edi WidodoUniversitas Muhammadiyah Sidoarjo1
R.A. IlyasUniversity of Technology Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Evaluation of dimensional accuracy on SLM product using 3D laser scanner</dc:title>
	<dc:creator xml:lang="en">Choiron, Moch. Agus</dc:creator>
	<dc:creator xml:lang="en">Purnowidodo, Anindito</dc:creator>
	<dc:creator xml:lang="en">Zacoeb, Achfas</dc:creator>
	<dc:creator xml:lang="en">Febritasari, Rosadila</dc:creator>
	<dc:creator xml:lang="en">Wirawan, Willy Artha</dc:creator>
	<dc:creator xml:lang="en">Kusyairi, Imam</dc:creator>
	<dc:creator xml:lang="en">Dika, Johan Wayan</dc:creator>
	<dc:subject xml:lang="en">Laser scanning</dc:subject>
	<dc:subject xml:lang="en">Additive manufacturing</dc:subject>
	<dc:subject xml:lang="en">Dimensional accuracy</dc:subject>
	<dc:subject xml:lang="en">Geomagic control</dc:subject>
	<dc:subject xml:lang="en">Selective Laser Melting (SLM)</dc:subject>
	<dc:description xml:lang="en">Dimensional accuracy is a critical factor in additive manufacturing, especially in Selective Laser Melting (SLM). Recently, many studies had investigated the SLM process and products, but studies on the evaluation of SLM printing product to check the dimensional accuracy have not been explored. This study investigates the dimensional accuracy of SLM products by employing a 3D laser scanning technology and evaluate the compatibility between CAD designs and the final SLM printed products. The 3D laser scanning is performed using a high-precision 3D laser scanner, then continued by comparison with the CAD model through Geomagic Control X software. Dimensional accuracy was measured using visual and statistical parameters such as color graphic and deviation. Results showed that deviation of SLM printed products was within the tolerance range of ±0.1 mm. The main factors that affect accuracy are printing laser speed and print orientation. The 3D laser scanning technology proved to be effective for evaluating the dimensional accuracy of SLM printed products. This study contributes to develop the quality control methods in the field of metal-based additive manufacturing.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-12-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/13448</dc:identifier>
	<dc:identifier>10.31603/mesi.13448</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 5 No. 2 (2025); 342-352</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/13448/6388</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Moch. Agus Choiron, Anindito Purnowidodo, Achfas Zacoeb, Rosadila Febritasari, Willy Artha Wirawan, Imam Kusyairi, Johan Wayan Dika</dc:rights>
</oai_dc:dc>