Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Optimization air circulation in negative pressure closed-house poultry buildings: A study on evaporative cooling pad thickness and exhaust fan operating pattern

Mechanical Engineering for Society and Industry · Vol. 5 No. 2 (2025) · hlm. 459–479

DOI
10.31603/mesi.14096
ISSN
2798-5245
Terbit
2025-12-28
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

An optimal environment for raising poultry requires a cool, humid climate. Negative pressure air circulation is widely implemented in closed-house cages, combined with evaporative cooling pads (ECP). Fresh air cannot naturally pass through the ECP due to the porosity of the material. The characteristics of the ECP and the configuration of the exhaust fan operating pattern affect airflow distribution, including velocity, temperature, and relative humidity (RH) levels. This research simulated the effect of varying ECP thickness on airflow distribution inside a closed-house cage. The simulation was run under 3D steady-state conditions with ECP thicknesses of 100 mm, 150 mm, 200 mm, and 300 mm, respectively. The ECP was kept wet, resulting in incoming air with 60% humidity and a temperature of 27 °C. The study used the K-ω SST turbulence model and SIMPLE second-order discretization. The analysis also provides recommendations for optimal exhaust fan operation during summer and identified restricted area. Five different fan operating patterns were tested, combining a small exhaust fan with two large ones. This analysis based on several parameter which refers uncomfortable environment, including: velocity, temperature, RH levels, and pollutant gas concentration. Hazardous conditions were determined by the maximum values observed across 42 iso-surfaces spaced 1 meter apart along the x-axis. A thicker ECP resulted in a higher pressure drop, reducing temperature differences inside the cage and leading to a more uniform temperature distribution. The 100 mm ECP thickness, the thinnest ECP layers, lowered the temperature inside the closed-house cage. The study suggests that, during summer, operating one small exhaust fan and one large fan is optimal due to the reduced presence of hazardous areas inside the cage.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 125 tautan kepenulisan bersama · 24 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Halu Oleo
  • Universitas Sembilanbelas November Kolaka
  • Institut Teknologi Adhi Tama Surabaya
  • Institut Teknologi Sepuluh Nopember
  • Royal University of Phnom Penh
  • Bank Indonesia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
LM TajidunUniversitas Halu Oleo7
LM. Fid AksaraUniversitas Halu Oleo5
Jumadil NangiUniversitas Halu Oleo5
Rahmat RamadhanUniversitas Halu Oleo5
Bambang PramonoUniversitas Halu Oleo4
Isnawaty IsnawatyAfiliasi tidak diketahui3
Nur Fajriah MuchlisUniversitas Halu Oleo3
Statiswaty StatiswatyUniversitas Halu Oleo3
Bambang PramonoBank Indonesia3
Ika Purwanti NingrumUniversitas Halu Oleo3
Rizal Adi SaputraUniversitas Halu Oleo3
Mutmainnah MuchtarUniversitas Sembilanbelas November Kolaka2
LM Bahtiar AksaraUniversitas Halu Oleo2
Afriyadin AfriyadinAfiliasi tidak diketahui1
Natalis RansiUniversitas Halu Oleo1
Mulatifa LalihaUniversitas Halu Oleo1
Sari Fatiqah AyuAfiliasi tidak diketahui1
Rahmayunita RahmayunitaAfiliasi tidak diketahui1
Nike SyafitriUniversitas Halu Oleo1
Yuwanda Purnamasari PasrunUniversitas Sembilanbelas November Kolaka1
Muh Iskandar Z. AAfiliasi tidak diketahui1
Nur Arifah SyafitriAfiliasi tidak diketahui1
Anita Puspita DewiAfiliasi tidak diketahui1
Resti IdayaniAfiliasi tidak diketahui1
Ramadhin ZaidUniversitas Halu Oleo1
Adnan HidayatUniversitas Halu Oleo1
Na’firul Hasna AriyaniAfiliasi tidak diketahui1
Risna RisnaAfiliasi tidak diketahui1
Sri Wayun WardaniAfiliasi tidak diketahui1
Annisyah JanuartiAfiliasi tidak diketahui1
Muhammad HattaAfiliasi tidak diketahui1
Adha Mashur SajiahUniversitas Halu Oleo1
Chindy Elfiana Suci NatasiyaAfiliasi tidak diketahui1
Saskia Randawula SilondaeUniversitas Halu Oleo1
Muh FachrulUniversitas Halu Oleo1
Laode Muhamad TajidunUniversitas Halu Oleo1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Optimization air circulation in negative pressure closed-house poultry buildings: A study on evaporative cooling pad thickness and exhaust fan operating pattern</dc:title>
	<dc:creator xml:lang="en">Lillahulhaq, Zain</dc:creator>
	<dc:creator xml:lang="en">Widodo, Wawan Aries</dc:creator>
	<dc:creator xml:lang="en">Sutardi, Sutardi</dc:creator>
	<dc:creator xml:lang="en">Yone, Thearith</dc:creator>
	<dc:subject xml:lang="en">Poultry;</dc:subject>
	<dc:subject xml:lang="en">Negative pressure air circulation</dc:subject>
	<dc:subject xml:lang="en">Closed-house cages</dc:subject>
	<dc:subject xml:lang="en">Evaporative cooling pads (ECP)</dc:subject>
	<dc:subject xml:lang="en">Exhaust fan operating patterns</dc:subject>
	<dc:description xml:lang="en">An optimal environment for raising poultry requires a cool, humid climate. Negative pressure air circulation is widely implemented in closed-house cages, combined with evaporative cooling pads (ECP). Fresh air cannot naturally pass through the ECP due to the porosity of the material. The characteristics of the ECP and the configuration of the exhaust fan operating pattern affect airflow distribution, including velocity, temperature, and relative humidity (RH) levels. This research simulated the effect of varying ECP thickness on airflow distribution inside a closed-house cage. The simulation was run under 3D steady-state conditions with ECP thicknesses of 100 mm, 150 mm, 200 mm, and 300 mm, respectively. The ECP was kept wet, resulting in incoming air with 60% humidity and a temperature of 27 °C. The study used the K-ω SST turbulence model and SIMPLE second-order discretization. The analysis also provides recommendations for optimal exhaust fan operation during summer and identified restricted area. Five different fan operating patterns were tested, combining a small exhaust fan with two large ones. This analysis based on several parameter which refers uncomfortable environment, including: velocity, temperature, RH levels, and pollutant gas concentration. Hazardous conditions were determined by the maximum values observed across 42 iso-surfaces spaced 1 meter apart along the x-axis. A thicker ECP resulted in a higher pressure drop, reducing temperature differences inside the cage and leading to a more uniform temperature distribution. The 100 mm ECP thickness, the thinnest ECP layers, lowered the temperature inside the closed-house cage. The study suggests that, during summer, operating one small exhaust fan and one large fan is optimal due to the reduced presence of hazardous areas inside the cage.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-12-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/14096</dc:identifier>
	<dc:identifier>10.31603/mesi.14096</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 5 No. 2 (2025); 459-479</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/14096/6420</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Zain Lillahulhaq, Wawan Aries Widodo, Sutardi Sutardi, Thearith Yone</dc:rights>
</oai_dc:dc>