Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Effect of calcination temperature on the thermo-structural behavior and morphology of natural clay for eco-friendly composite applications

Mechanical Engineering for Society and Industry · Vol. 5 No. 2 (2025) · hlm. 480–494

DOI
10.31603/mesi.14144
ISSN
2798-5245
Terbit
2025-12-28
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

Natural clay is a low-cost and abundant material with potential as a sustainable filler in composite applications. Although natural clay has been widely explored as a sustainable filler material, systematic studies correlating calcination temperature with simultaneous thermal, structural, and morphological evolution remain limited. This study aims to evaluate how different calcination temperatures affect the thermal, structural, morphological, and physical properties of natural clay to determine its suitability for eco-friendly composite use. Clay powders were thermally treated at 600”¯Â°C (CCB), 700”¯Â°C (CCG), and 800”¯Â°C (CCM), and comprehensively characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and physical testing. The results indicate that increasing calcination temperature significantly enhances crystallinity, and thermal stability, with the CCM sample (800 °C) exhibiting the most pronounced improvements. The CCM sample, calcined at 800”¯Â°C, exhibited the highest crystallinity index (72%), the lowest water absorption, the most compact microstructure, and the highest bulk density (6100 ± 40 kg/m³). TGA revealed improved thermal resistance up to 600”¯Â°C, with increasing char residue values from 38.2% (raw) to 48.2% (CCM), indicating enhanced thermal stability. FTIR analysis confirmed the reduction of hydroxyl and carbonate groups, particularly in the CCM sample. SEM observations showed a transformation from porous, irregular morphologies in raw clay to dense and homogeneous particles after calcination. These findings confirm that high-temperature calcined clay, especially the CCM sample, presents excellent potential as a sustainable filler material for high-performance green composites.

Kata kunci

Jaringan kolaborasi para penulis

31 penulis · 69 tautan kepenulisan bersama · 43 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Mataram
  • Hasanuddin University
  • China University of Petroleum, East China
  • Kalasalingam Academy of Research and Education
  • Politeknik Pertanian Negeri Payakumbuh
  • Universitas Muslim Indonesia
  • China University of Petroleum, Beijing
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Emi Prasetyawati UmarUniversitas Muslim Indonesia4
Sujita SujitaUniversity of Mataram3
SutejaAfiliasi tidak diketahui2
Hamsu KadriyanUniversity of Mataram2
Muhammad Zaidan Fadhlurrohman RivlanUniversity of Mataram2
Sentil Muthu Kumar ThiagamaniKalasalingam Academy of Research and Education2
Romuald SohoresChina University of Petroleum, East China1
M. Muhammad Fawzy IsmullahHasanuddin University1
Muhammad Fawzy Ismullah MassinaiHasanuddin University1
Erfan SyamsuddinHasanuddin University1
Maria MariaHasanuddin University1
Septian Tri NugrahaChina University of Petroleum, Beijing1
Wahyuni WahyuniHasanuddin University1
Sabrianto AswadHasanuddin University1
La Ode ArminHasanuddin University1
Ragil WidyoriniUniversitas Gadjah Mada1
Muji SetiyoUniversitas Muhammadiyah Magelang1
Gunawan RefiadiUniversitas Sebelas April1
SulhainiUniversity of Mataram1
Muhammad Nabil Fadhlurrohman RivlanUniversity of Mataram1
Senthil Muthu Kumar ThiagamaniKalasalingam Academy of Research and Education1
Ahmad Ilyas RushdanUniversity of Technology Malaysia1
Catalin Iulian PruncuPolytechnic University of Bari1
Syarif HidayatullahUniversity of Mataram1
Ahmad Akromul HudaUniversity of Mataram1
Maharsa PradityatamaUniversity of Mataram1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Effect of calcination temperature on the thermo-structural behavior and morphology of natural clay for eco-friendly composite applications</dc:title>
	<dc:creator xml:lang="en">Syafri, Edi</dc:creator>
	<dc:creator xml:lang="en">Salman, Salman</dc:creator>
	<dc:creator xml:lang="en">Jamaluddin, Jamaluddin</dc:creator>
	<dc:creator xml:lang="en">Sari, Nasmi Herlina</dc:creator>
	<dc:creator xml:lang="en">Suteja, Suteja</dc:creator>
	<dc:subject xml:lang="en">Calcined clay</dc:subject>
	<dc:subject xml:lang="en">Thermal treatment</dc:subject>
	<dc:subject xml:lang="en">Morphology</dc:subject>
	<dc:subject xml:lang="en">Crystallinity</dc:subject>
	<dc:subject xml:lang="en">Sustainable filler</dc:subject>
	<dc:description xml:lang="en">Natural clay is a low-cost and abundant material with potential as a sustainable filler in composite applications. Although natural clay has been widely explored as a sustainable filler material, systematic studies correlating calcination temperature with simultaneous thermal, structural, and morphological evolution remain limited. This study aims to evaluate how different calcination temperatures affect the thermal, structural, morphological, and physical properties of natural clay to determine its suitability for eco-friendly composite use. Clay powders were thermally treated at 600”¯Â°C (CCB), 700”¯Â°C (CCG), and 800”¯Â°C (CCM), and comprehensively characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and physical testing. The results indicate that increasing calcination temperature significantly enhances crystallinity, and thermal stability, with the CCM sample (800 °C) exhibiting the most pronounced improvements. The CCM sample, calcined at 800”¯Â°C, exhibited the highest crystallinity index (72%), the lowest water absorption, the most compact microstructure, and the highest bulk density (6100 ± 40 kg/m³). TGA revealed improved thermal resistance up to 600”¯Â°C, with increasing char residue values from 38.2% (raw) to 48.2% (CCM), indicating enhanced thermal stability. FTIR analysis confirmed the reduction of hydroxyl and carbonate groups, particularly in the CCM sample. SEM observations showed a transformation from porous, irregular morphologies in raw clay to dense and homogeneous particles after calcination. These findings confirm that high-temperature calcined clay, especially the CCM sample, presents excellent potential as a sustainable filler material for high-performance green composites.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-12-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/14144</dc:identifier>
	<dc:identifier>10.31603/mesi.14144</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 5 No. 2 (2025); 480-494</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/14144/6424</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Edi Syafri, Salman Salman, Jamaluddin Jamaluddin, Nasmi Herlina Sari, Suteja Suteja</dc:rights>
</oai_dc:dc>