Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Igniting the flame, maximizing energy: The effectiveness of nutmeg oil as a bioadditive in B20 droplet combustion

Mechanical Engineering for Society and Industry · Vol. 5 No. 2 (2025) · hlm. 495–509

DOI
10.31603/mesi.14499
ISSN
2798-5245
Terbit
2025-12-28
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

This study aims to experimentally investigate the effect of adding nutmeg oil (Myristica fragrans) as a bioadditive on the combustion characteristics of Biosolar B20 fuel droplets, addressing its inherent drawbacks such as longer ignition delay and incomplete combustion. Nutmeg oil iss selected due to its high oxygenated compound content and potential to enhance combustion efficiency and ignition quality. Key parameters examined include ignition delay time, combustion duration, burning rate, flash point, flame height, and peak temperature during the combustion process. Nutmeg oil was added in volumes ranging from 1 to 5 mL to the B20 mixture, and the combustion experiments were carried out using a droplet-based method to observe ignition and burning behavior under controlled conditions. The results showed that the addition of nutmeg oil significantly reduced the ignition delay time from 6.74 seconds (pure B20) to 1.38 seconds (5 mL nutmeg oil), along with decreases in combustion duration and flash point. Conversely, the burning rate increased from 0.53 mm²/s to 1.04 mm²/s, and the maximum temperature rose from 409.4°C to 553.3°C. GC-MS analysis revealed an increase in active volatile compounds such as α-pinene and myristicin, which enhanced the combustion process. ANOVA and Tukey HSD statistical tests confirmed that the differences among treatments were statistically significant (p < 0.05). Overall, this study highlights the potential of nutmeg oil”“blended B20 fuel for practical engine applications and its contribution to sustainable energy development.

Kata kunci

Jaringan kolaborasi para penulis

29 penulis · 139 tautan kepenulisan bersama · 65 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Lambung Mangkurat University
  • Universitas Sains dan Teknologi Jayapura
  • Politeknik Negeri Malang
  • Keio University
  • State University of Jakarta
  • Tadulako University
  • Universitas Muhammadiyah Semarang
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Mastiadi TamjidillahLambung Mangkurat University4
Arry Eko PristiwantoLambung Mangkurat University2
Sigit Aji SetiawanLambung Mangkurat University2
Mahmud MahmudLambung Mangkurat University2
Abdul GhofurLambung Mangkurat University2
Mahmud MahmudLambung Mangkurat University2
Ma’ruf Ma’rufLambung Mangkurat University2
Adi NordimanLambung Mangkurat University2
Suyatno SuyatnoUniversitas Sains dan Teknologi Jayapura1
Masaki YamaguchiKeio University1
Selcuk SarikocAfiliasi tidak diketahui1
Hendry Y. NanlohyUniversitas Sains dan Teknologi Jayapura1
Helen RiupassaUniversitas Sains dan Teknologi Jayapura1
Andi SanataUniversitas Jember1
Trismawati TrismawatiUniversitas Panca Marga1
Muhammad Akhlis RizzaPoliteknik Negeri Malang1
Satworo AdiwidodoPoliteknik Negeri Malang1
Takuya TomidokoroKeio University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Igniting the flame, maximizing energy: The effectiveness of nutmeg oil as a bioadditive in B20 droplet combustion</dc:title>
	<dc:creator xml:lang="en">Subagyo, Rachmat</dc:creator>
	<dc:creator xml:lang="en">Tamjidilah, Mastiadi</dc:creator>
	<dc:creator xml:lang="en">Ghofur, Abdul</dc:creator>
	<dc:creator xml:lang="en">Siswanto, Rudi</dc:creator>
	<dc:creator xml:lang="en">Ma'ruf, Ma'ruf</dc:creator>
	<dc:creator xml:lang="en">Wardoyo, Wardoyo</dc:creator>
	<dc:creator xml:lang="en">Muchsin, Muchsin</dc:creator>
	<dc:creator xml:lang="en">Purnomo, Purnomo</dc:creator>
	<dc:creator xml:lang="en">Anggono, Atma Cahyo</dc:creator>
	<dc:creator xml:lang="en">Fadillah, Faisal</dc:creator>
	<dc:creator xml:lang="en">Putra, Anugrah Perdana</dc:creator>
	<dc:subject xml:lang="en">Nutmeg oil</dc:subject>
	<dc:subject xml:lang="en">Biosolar B20</dc:subject>
	<dc:subject xml:lang="en">Droplet combustion</dc:subject>
	<dc:subject xml:lang="en">Ignition delay</dc:subject>
	<dc:subject xml:lang="en">Bioadditive</dc:subject>
	<dc:description xml:lang="en">This study aims to experimentally investigate the effect of adding nutmeg oil (Myristica fragrans) as a bioadditive on the combustion characteristics of Biosolar B20 fuel droplets, addressing its inherent drawbacks such as longer ignition delay and incomplete combustion. Nutmeg oil iss selected due to its high oxygenated compound content and potential to enhance combustion efficiency and ignition quality. Key parameters examined include ignition delay time, combustion duration, burning rate, flash point, flame height, and peak temperature during the combustion process. Nutmeg oil was added in volumes ranging from 1 to 5 mL to the B20 mixture, and the combustion experiments were carried out using a droplet-based method to observe ignition and burning behavior under controlled conditions. The results showed that the addition of nutmeg oil significantly reduced the ignition delay time from 6.74 seconds (pure B20) to 1.38 seconds (5 mL nutmeg oil), along with decreases in combustion duration and flash point. Conversely, the burning rate increased from 0.53 mm²/s to 1.04 mm²/s, and the maximum temperature rose from 409.4°C to 553.3°C. GC-MS analysis revealed an increase in active volatile compounds such as α-pinene and myristicin, which enhanced the combustion process. ANOVA and Tukey HSD statistical tests confirmed that the differences among treatments were statistically significant (p &amp;lt; 0.05). Overall, this study highlights the potential of nutmeg oil”“blended B20 fuel for practical engine applications and its contribution to sustainable energy development.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-12-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/14499</dc:identifier>
	<dc:identifier>10.31603/mesi.14499</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 5 No. 2 (2025); 495-509</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/14499/6425</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Rachmat Subagyo, Mastiadi Tamjidilah, Abdul Ghofur, Rudi Siswanto, Ma'ruf Ma'ruf, Wardoyo Wardoyo, Muchsin Muchsin, Purnomo Purnomo, Atma Cahyo Anggono, Faisal Fadillah, Anugrah Perdana Putra</dc:rights>
</oai_dc:dc>