Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Corrosion behavior of ST37 low carbon steel welded joints in acidic and basic environments: implications for structural durability

Mechanical Engineering for Society and Industry · Vol. 6 No. 1 (2026) · hlm. 114–127

DOI
10.31603/mesi.15295
ISSN
2798-5245
Terbit
2026-05-14
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

This study investigates the corrosion behavior and mechanical degradation of welded ST37 low-carbon steel exposed to basic (NaOH) and chloride-containing (NH₄Cl) environments. The objective is to evaluate the influence of solution chemistry and immersion time on corrosion rate, surface morphology, elemental composition, and tensile properties of welded steel structures. Welded ST37 specimens were immersed in 1 M NaOH and 1 M NH₄Cl solutions for 100, 200, and 300 hours under controlled laboratory conditions. Corrosion rates were determined using the weight loss method, while surface morphology and elemental composition were analyzed using scanning electron microscopy coupled with energy dispersive spectroscopy (SEM–EDS). Mechanical degradation was evaluated through tensile testing following ASTM E8 standards. The results show that NaOH exposure promotes the formation of a stable oxide layer that reduces corrosion rates from 0.024 to 0.019 mm/year and partially restores tensile strength after prolonged immersion. In contrast, NH₄Cl exposure causes more aggressive corrosion characterized by pitting, porous corrosion products, and localized surface degradation due to chloride-induced passive film breakdown. SEM observations confirm thicker corrosion layers and localized attack in the weld metal region, while EDS analysis reveals increased oxygen and chloride content associated with the respective corrosion mechanisms.

Kata kunci

Jaringan kolaborasi para penulis

10 penulis · 21 tautan kepenulisan bersama · 10 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Muhammadiyah University of Yogyakarta
  • National Research and Innovation Agency
  • Universitas Muhammadiyah Riau
  • Chang Gung University
  • Universitas Islam Negeri Mataram
  • Kolej Universiti Perguruan Ugama Seri Begawan
  • Sunan Gunung Djati State Islamic University Bandung
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Khairul FuadNational Research and Innovation Agency1
Lalu Agus SatriawanUniversitas Islam Negeri Mataram1
Mashuri MashuriNational Research and Innovation Agency1
Harapandi HarapandiKolej Universiti Perguruan Ugama Seri Begawan1
Ilyas Rifa’iSunan Gunung Djati State Islamic University Bandung1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Corrosion behavior of ST37 low carbon steel welded joints in acidic and basic environments: implications for structural durability</dc:title>
	<dc:creator xml:lang="en">Wisnujati, Andika</dc:creator>
	<dc:creator xml:lang="en">Mudjijana</dc:creator>
	<dc:creator xml:lang="en">Ma’arif, Syamsul</dc:creator>
	<dc:creator xml:lang="en">Satriardi</dc:creator>
	<dc:creator xml:lang="en">Bagban, Hojjat</dc:creator>
	<dc:subject xml:lang="en">ST37 low-carbon steel</dc:subject>
	<dc:subject xml:lang="en">Corrosion behaviour</dc:subject>
	<dc:subject xml:lang="en">NH4Cl and NaOH environments</dc:subject>
	<dc:subject xml:lang="en">SEM-EDS analysis</dc:subject>
	<dc:description xml:lang="en">This study investigates the corrosion behavior and mechanical degradation of welded ST37 low-carbon steel exposed to basic (NaOH) and chloride-containing (NH₄Cl) environments. The objective is to evaluate the influence of solution chemistry and immersion time on corrosion rate, surface morphology, elemental composition, and tensile properties of welded steel structures. Welded ST37 specimens were immersed in 1 M NaOH and 1 M NH₄Cl solutions for 100, 200, and 300 hours under controlled laboratory conditions. Corrosion rates were determined using the weight loss method, while surface morphology and elemental composition were analyzed using scanning electron microscopy coupled with energy dispersive spectroscopy (SEM–EDS). Mechanical degradation was evaluated through tensile testing following ASTM E8 standards. The results show that NaOH exposure promotes the formation of a stable oxide layer that reduces corrosion rates from 0.024 to 0.019 mm/year and partially restores tensile strength after prolonged immersion. In contrast, NH₄Cl exposure causes more aggressive corrosion characterized by pitting, porous corrosion products, and localized surface degradation due to chloride-induced passive film breakdown. SEM observations confirm thicker corrosion layers and localized attack in the weld metal region, while EDS analysis reveals increased oxygen and chloride content associated with the respective corrosion mechanisms. </dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2026-05-14</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/15295</dc:identifier>
	<dc:identifier>10.31603/mesi.15295</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 6 No. 1 (2026); 114-127</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/15295/6745</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Andika Wisnujati, Mudjijana, Syamsul Ma’arif, Satriardi, Hojjat Bagban</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by-nc/4.0</dc:rights>
</oai_dc:dc>