Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Experimental performance evaluation of a liquid–gas ejector with a confined suction chamber under vertical downward flow:.

Mechanical Engineering for Society and Industry · Vol. 6 No. 2 (2026)

DOI
10.31603/mesi.15590
ISSN
2798-5245
Terbit
2026-09-16
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

A liquid–gas ejector (LGE) is a vacuum-generating device that uses high-pressure liquid to entrain and compress gas and is widely applied in industrial processes. However, undesired recirculation within the suction chamber may reduce entrainment effectiveness and overall ejector performance. This study experimentally investigates the effect of a confined suction chamber on the performance of a vertical downward flow. The modified chamber was designed to restrict the interaction zone between the liquid jet and the surrounding gas, thereby reducing circulation losses. The performance of the confined suction chamber was compared with that of a conventional suction chamber under the same operating conditions by evaluating suction pressure, static pressure distribution, flow ratio, and efficiency. The results show that the confined suction chamber produced lower throat pressure and altered pressure recovery along the throat and diffuser, indicating changes in the entrainment processes. It also delivered higher suction performance and greater maximum efficiency than the conventional configuration. The analysis indicates that, at a flow rate of 0.327 L/s, the confined suction chamber produces a lower absolute pressure of 44 kPa absolute than the conventional suction chamber, which records 54 kPa absolute. The highest efficiency obtained with the confined suction chamber was 9.94% at a flow ratio of 0.82, compared with 8.23% at 0.87 for the conventional chamber.

Kata kunci

Jaringan kolaborasi para penulis

14 penulis · 26 tautan kepenulisan bersama · 14 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Muhammadiyah University of Surakarta
  • Mercu Buana University
  • Muhammadiyah University of Yogyakarta
  • Institut Teknologi Nasional Yogyakarta
  • National Taiwan University of Science and Technology
  • University of Sarjanawiyata Tamansiswa
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Fajar AnggaraMercu Buana University2
Nur HidayatiMuhammadiyah University of Surakarta1
Herry PurnamaMuhammadiyah University of Surakarta1
Wahib KhoiruddinMuhammadiyah University of Surakarta1
Ngafwan NgafwanMuhammadiyah University of Surakarta1
Dody Bimo AjiUniversity of Sarjanawiyata Tamansiswa1
Dedik RomahadiMercu Buana University1
Alief Avicenna LuthfieMercu Buana University1
Muhammad NadjibMuhammadiyah University of Yogyakarta1
Wahyudi WahyudiMuhammadiyah University of Yogyakarta1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Experimental performance evaluation of a liquid–gas ejector with a confined suction chamber under vertical downward flow: .</dc:title>
	<dc:creator xml:lang="en">Sugati, Daru</dc:creator>
	<dc:creator xml:lang="en">Irawan, Yosua Heru</dc:creator>
	<dc:creator xml:lang="en">Effendy, Marwan</dc:creator>
	<dc:creator xml:lang="en">Salim, Amat Agus</dc:creator>
	<dc:subject xml:lang="en">LGE</dc:subject>
	<dc:subject xml:lang="en">Gas entrainment</dc:subject>
	<dc:subject xml:lang="en">Conventional suction chamber</dc:subject>
	<dc:subject xml:lang="en">Confined suction chamber</dc:subject>
	<dc:description xml:lang="en">A liquid–gas ejector (LGE) is a vacuum-generating device that uses high-pressure liquid to entrain and compress gas and is widely applied in industrial processes. However, undesired recirculation within the suction chamber may reduce entrainment effectiveness and overall ejector performance. This study experimentally investigates the effect of a confined suction chamber on the performance of a  vertical downward flow. The modified chamber was designed to restrict the interaction zone between the liquid jet and the surrounding gas, thereby reducing circulation losses. The performance of the confined suction chamber was compared with that of a conventional suction chamber under the same operating conditions by evaluating suction pressure, static pressure distribution, flow ratio, and efficiency. The results show that the confined suction chamber produced lower throat pressure and altered pressure recovery along the throat and diffuser, indicating changes in the entrainment processes. It also delivered higher suction performance and greater maximum efficiency than the conventional configuration. The analysis indicates that, at a flow rate of 0.327 L/s, the confined suction chamber produces a lower absolute pressure of 44 kPa absolute than the conventional suction chamber, which records 54 kPa absolute. The highest efficiency obtained with the confined suction chamber was 9.94% at a flow ratio of 0.82, compared with 8.23% at 0.87 for the conventional chamber.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2026-09-16</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/15590</dc:identifier>
	<dc:identifier>10.31603/mesi.15590</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 6 No. 2 (2026): Issue in Progress</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:rights xml:lang="en">Copyright (c) 2026 Daru Sugati, Yosua Heru Irawan, Marwan Effendy, Amat Agus Salim</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by-nc/4.0</dc:rights>
</oai_dc:dc>