Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Electromechanical and CFD-coupled analysis of deflector-guided savonius pico-hydro turbine with quarter-circular blade rotors

Mechanical Engineering for Society and Industry · Vol. 6 No. 2 (2026) · hlm. 362–382

DOI
10.31603/mesi.16083
ISSN
2798-5245
Terbit
2026-07-22
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

Global electricity demand continues to rise, increasing dependence on fossil fuels and accelerating greenhouse gas emissions that contribute to climate instability. Small-scale hydropower offers a clean alternative, particularly for distributed and space-constrained applications where conventional hydropower systems are difficult to implement. Among available concepts, the Savonius Pico-Hydro Turbine (SPHT) is attractive because of its simple structure, low production cost, and good self-starting capability. However, previous studies have mainly focused on mechanical performance, while the combined evaluation of mechanical response, electrical output, generator efficiency, and hydrodynamic flow behavior remains limited. The novelty of this study lies in the use of a quarter-circular blade profile instead of the commonly used semi-circular Savonius blade, combined with experimental electromechanical testing, CFD-based flow visualization, and deflector-angle variation. Two- and four-blade SPHT configurations were examined under realistic loading conditions, while CFD simulation was employed to clarify velocity distribution, pressure loading, momentum exchange, and deflector-guided flow patterns. The results showed that the four-blade rotor produced higher torque and a stronger electrical response than the two-blade rotor. CFD contour analysis supported these findings by showing stronger momentum exchange and more distributed pressure loading around the higher-solidity rotor. The deflector investigation further indicated that a 30° deflector angle provided the most effective flow redirection and pressure distribution among the evaluated cases. Overall, the proposed experimental and numerical framework provides a practical basis for optimizing quarter-circular SPHT design through blade configuration selection and deflector-angle tuning, supporting compact and reliable pico-scale clean energy generation for remote and low-infrastructure applications.

Kata kunci

Jaringan kolaborasi para penulis

10 penulis · 27 tautan kepenulisan bersama · 8 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Yogyakarta State University
  • Muhammadiyah University of Yogyakarta
  • Indonesia Open University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Muhamad Riyan MaulanaIndonesia Open University1
Asma’ Khoirunnisa’Yogyakarta State University1
Yanuar Agung FadlullahYogyakarta State University1
Gilang Adi PrasetyoYogyakarta State University1
Hanifah Mar’atush ShalihahYogyakarta State University1
Sugiri SugiriYogyakarta State University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Electromechanical and CFD-coupled analysis of deflector-guided savonius pico-hydro turbine with quarter-circular blade rotors</dc:title>
	<dc:creator xml:lang="en">Anugrah, Rinasa Agistya</dc:creator>
	<dc:creator xml:lang="en">Sudarja</dc:creator>
	<dc:creator xml:lang="en">Budiman, Yosef</dc:creator>
	<dc:creator xml:lang="en">Ilyas, Muhammad Yusri</dc:creator>
	<dc:subject xml:lang="en">CFD simulation</dc:subject>
	<dc:subject xml:lang="en">Deflector angle</dc:subject>
	<dc:subject xml:lang="en">Pico-hydro turbine</dc:subject>
	<dc:subject xml:lang="en">Savonius blade</dc:subject>
	<dc:subject xml:lang="en">Water flow</dc:subject>
	<dc:description xml:lang="en">Global electricity demand continues to rise, increasing dependence on fossil fuels and accelerating greenhouse gas emissions that contribute to climate instability. Small-scale hydropower offers a clean alternative, particularly for distributed and space-constrained applications where conventional hydropower systems are difficult to implement. Among available concepts, the Savonius Pico-Hydro Turbine (SPHT) is attractive because of its simple structure, low production cost, and good self-starting capability. However, previous studies have mainly focused on mechanical performance, while the combined evaluation of mechanical response, electrical output, generator efficiency, and hydrodynamic flow behavior remains limited. The novelty of this study lies in the use of a quarter-circular blade profile instead of the commonly used semi-circular Savonius blade, combined with experimental electromechanical testing, CFD-based flow visualization, and deflector-angle variation. Two- and four-blade SPHT configurations were examined under realistic loading conditions, while CFD simulation was employed to clarify velocity distribution, pressure loading, momentum exchange, and deflector-guided flow patterns. The results showed that the four-blade rotor produced higher torque and a stronger electrical response than the two-blade rotor. CFD contour analysis supported these findings by showing stronger momentum exchange and more distributed pressure loading around the higher-solidity rotor. The deflector investigation further indicated that a 30° deflector angle provided the most effective flow redirection and pressure distribution among the evaluated cases. Overall, the proposed experimental and numerical framework provides a practical basis for optimizing quarter-circular SPHT design through blade configuration selection and deflector-angle tuning, supporting compact and reliable pico-scale clean energy generation for remote and low-infrastructure applications.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2026-07-22</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/16083</dc:identifier>
	<dc:identifier>10.31603/mesi.16083</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 6 No. 2 (2026): Issue in Progress; 362-382</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/16083/7090</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Rinasa Agistya Anugrah, Sudarja, Yosef Budiman, Muhammad Yusri Ilyas</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by-nc/4.0</dc:rights>
</oai_dc:dc>