Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Corrigendum to “The new modification of a solar still chamber with hollow glass: An experimental comparison between perpendicular and inline hollow glass configurations” [MESI Vol. 5, No. 2 (2025) pp 331-341]: Refers to: https://doi.org/10.31603/mesi.13238

Mechanical Engineering for Society and Industry · Vol. 6 No. 1 (2026) · hlm. 296–297

DOI
10.31603/mesi.17044
ISSN
2798-5245
Terbit
2026-06-18
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

In the original article (https://doi.org/10.31603/mesi.13238), inaccuracies were identified in the reporting of productivity and thermal efficiency values cited from Reference [35] in Table 3 and the corresponding discussion in Section 4.2. Following a notification received by the Editorial Office and subsequent verification of the cited source, the authors agreed to revise the affected content. The corrections are presented below to ensure the accuracy and integrity of the published record.All corrections are provided in detail in the PDF file.Supplementary file S1: Letter to Editor

Kata kunci

Jaringan kolaborasi para penulis

9 penulis · 27 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sebelas Maret University
  • Universitas Pancasakti Tegal
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Eko Prasetya BudianaSebelas Maret University7
Irfan SantosaUniversitas Pancasakti Tegal2
Solikin AndriyantoSebelas Maret University2

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Corrigendum to “The new modification of a solar still chamber with hollow glass: An experimental comparison between perpendicular and inline hollow glass configurations” [MESI Vol. 5, No. 2 (2025) pp 331-341]: Refers to: https://doi.org/10.31603/mesi.13238</dc:title>
	<dc:creator xml:lang="en">Budiana, Eko Prasetyo</dc:creator>
	<dc:creator xml:lang="en">Septiyanto, Muhamad Dwi</dc:creator>
	<dc:creator xml:lang="en">Auliansyah, Satria</dc:creator>
	<dc:creator xml:lang="en">Sayyid, Naufal Rizky</dc:creator>
	<dc:creator xml:lang="en">Yaningsih, Indri</dc:creator>
	<dc:creator xml:lang="en">Hadi, Syamsul</dc:creator>
	<dc:subject xml:lang="en">PHGSS</dc:subject>
	<dc:subject xml:lang="en">IHGSS</dc:subject>
	<dc:subject xml:lang="en">Hollow glass</dc:subject>
	<dc:subject xml:lang="en">CS4 modification</dc:subject>
	<dc:subject xml:lang="en">Desalination</dc:subject>
	<dc:description xml:lang="en">In the original article (https://doi.org/10.31603/mesi.13238), inaccuracies were identified in the reporting of productivity and thermal efficiency values cited from Reference [35] in Table 3 and the corresponding discussion in Section 4.2. Following a notification received by the Editorial Office and subsequent verification of the cited source, the authors agreed to revise the affected content. The corrections are presented below to ensure the accuracy and integrity of the published record.All corrections are provided in detail in the PDF file.Supplementary file S1: Letter to Editor</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2026-06-18</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/17044</dc:identifier>
	<dc:identifier>10.31603/mesi.17044</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 6 No. 1 (2026); 296-297</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/17044/6827</dc:relation>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/17044/6876</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Eko Prasetyo Budiana, Muhamad Dwi Septiyanto, Satria Auliansyah, Naufal Rizky Sayyid, Indri Yaningsih, Syamsul Hadi</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by-nc/4.0</dc:rights>
</oai_dc:dc>