Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Sustainable Bioplastics Made from Cassava Peel Waste Starch and Carrageenan Formulations: Synthesis and Characterization

Molekul: Jurnal Ilmiah Kimia · Vol. 19 No. 1 (2024) · hlm. 36–45

DOI
10.20884/1.jm.2024.19.1.8394
ISSN
2503-0310, 1907-9761
Terbit
2024-03-14
Penerbit
Universitas Jenderal Soedirman
Bahasa
eng

Abstrak

Plastic waste has become a global environmental problem as it is difficult to decompose and harms the environment. The alternative solution to overcome this problem is to produce biodegradable plastics made from renewable materials. Cassava peel waste contains starch that can form a thin film but has poor mechanical properties. Therefore, it is necessary to include additional substances to enhance its strength. Carrageenan is a substance that can improve bioplastic mechanical properties. This study aims to determine the characteristics of bioplastic made from cassava peel waste starch and carrageenan formulation. Nine formulations were tested in this study using the randomized complete block design factorial with the two factors of cassava peel starch (S) and carrageenan (C) concentrations, both at three levels and carried out under three replications. Bioplastics characteristics are observed in thickness, swelling, biodegradation, tensile strength, elongation, and elasticity. The formulation S2C1 (starch 20%; carrageenan 5%) produced the bioplastic with the best mechanical properties, including a tensile strength of 1.1 MPa, elongation of 1.33%, and elasticity of 0.87. Meanwhile, the formulation S3C1 (starch 30%; carrageenan 5%) had the best results for swelling, thickness, and biodegradability, with a swelling value of 57.79%, thickness of 0.36mm, and 11-day biodegradability.

Jaringan kolaborasi para penulis

40 penulis · 242 tautan kepenulisan bersama · 15 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Lampung University
  • IPB University
  • National Research and Innovation Agency
  • Politeknik Negeri Subang
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Esa Ghanim FadhallahAfiliasi tidak diketahui4
Haidawati HaidawatiLampung University4
Sri Aisyah HidayatiLampung University3
Aisyah Tri RamadhaniLampung University3
Nurullia FebriatiAfiliasi tidak diketahui2
Nurullia FebriatiLampung University2
Bambang RiyantoIPB University1
Akhiruddin MadduIPB University1
Susilawati SusilawatiPoliteknik Negeri Subang1
Putri NavisaAfiliasi tidak diketahui1
Ribut SugihartoAfiliasi tidak diketahui1
Susilawati SusilawatiLampung University1
Putri NavisaLampung University1
Ribut SugihartoLampung University1
Haidawati HaidawatiAfiliasi tidak diketahui1
Frily Aurelia Salshabila FahleviAfiliasi tidak diketahui1
Hersan Pratama AshariAfiliasi tidak diketahui1
Yosnita AnggrianiAfiliasi tidak diketahui1
Ni Made Puspa DewiAfiliasi tidak diketahui1
Dea MerandaAfiliasi tidak diketahui1
Elita MulianingsihAfiliasi tidak diketahui1
Frily Aurelia Salshabila FahleviLampung University1
Hersan Pratama AshariLampung University1
Yosnita AnggrianiLampung University1
Ni Made Puspa DewiLampung University1
Dea MerandaLampung University1
Elita MulianingsihLampung University1
Resti SabillaAfiliasi tidak diketahui1
Annisa Yasmine AuliaAfiliasi tidak diketahui1
Affandi PrayogaAfiliasi tidak diketahui1
Zaky AdrianAfiliasi tidak diketahui1
Afrido RahmandaAfiliasi tidak diketahui1
Eka Herlina FatimatuzzahroAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jos.unsoed.ac.id/index.php/jm/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US"> Sustainable Bioplastics Made from Cassava Peel Waste Starch and Carrageenan Formulations: Synthesis and Characterization</dc:title>
	<dc:creator>Fadhallah, Esa Ghanim</dc:creator>
	<dc:creator>Assa'diyah, Indah Nurul</dc:creator>
	<dc:creator>Juwita, Nana</dc:creator>
	<dc:creator>Tullaila, Sholeha</dc:creator>
	<dc:creator>Yudistiro, Muhammad Kahfi Kharisma</dc:creator>
	<dc:creator>Zuidar, Ahmad Sapta</dc:creator>
	<dc:creator>Dameswary, Amarilia Harsanti</dc:creator>
	<dc:description xml:lang="en-US">Plastic waste has become a global environmental problem as it is difficult to decompose and harms the environment. The alternative solution to overcome this problem is to produce biodegradable plastics made from renewable materials. Cassava peel waste contains starch that can form a thin film but has poor mechanical properties. Therefore, it is necessary to include additional substances to enhance its strength. Carrageenan is a substance that can improve bioplastic mechanical properties. This study aims to determine the characteristics of bioplastic made from cassava peel waste starch and carrageenan formulation. Nine formulations were tested in this study using the randomized complete block design factorial with the two factors of cassava peel starch (S) and carrageenan (C) concentrations, both at three levels and carried out under three replications. Bioplastics characteristics are observed in thickness, swelling, biodegradation, tensile strength, elongation, and elasticity. The formulation S2C1 (starch 20%; carrageenan 5%) produced the bioplastic with the best mechanical properties, including a tensile strength of 1.1 MPa, elongation of 1.33%, and elasticity of 0.87. Meanwhile, the formulation S3C1 (starch 30%; carrageenan 5%) had the best results for swelling, thickness, and biodegradability, with a swelling value of 57.79%, thickness of 0.36mm, and 11-day biodegradability.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Jenderal Soedirman</dc:publisher>
	<dc:date>2024-03-14</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jos.unsoed.ac.id/index.php/jm/article/view/8394</dc:identifier>
	<dc:identifier>10.20884/1.jm.2024.19.1.8394</dc:identifier>
	<dc:source xml:lang="en-US">Molekul; Vol 19 No 1 (2024); 36-45</dc:source>
	<dc:source>2503-0310</dc:source>
	<dc:source>1907-9761</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jos.unsoed.ac.id/index.php/jm/article/view/8394/5103</dc:relation>
</oai_dc:dc>