Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Influence of Temperature and Particle Size on Heating Value of Biobriquette from Rubber Seed

Science and Technology Indonesia · Vol. 4 No. 2 (2019) · hlm. 57–59

DOI
10.26554/sti.2019.4.2.57-59
ISSN
2580-4391, 2580-4405
Terbit
2019-05-02
Penerbit
Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya
Bahasa
eng

Abstrak

Rubber seed as a biomass is potentially used as the source of alternative energy in briquette. Previous research had found that rubber seed briquette has the highest heating value of 6287,8 cal/g. It can be increased by varying temperature and mesh size. In this research, the effect of temperature and particle size on the amount of heat of rubber seed biobriquette from Muarakuang (Batu Raja) was investigated. It was done in Politeknik Negeri Sriwijaya Palembang laboratory. Proximate analysis was executed in Politeknik Negeri Sriwijaya Palembang coal laboratory. The temperature varied of 250 oC, 500 oC, and 750 oC with the particle size varied by 80 mesh, 120 mesh, and 200 mesh. Quality test of fabricated biobriquette consisted of proximate analysis such as calorific value, inherent moisture, ash ratio, volatile matter ratio, and fixed carbon ratio. The highest of heating value was 6836 cal/g from biobriquette sample were found under particle size of 80 mesh and temperature of 250 oC. The heating value reached 5371 cal/g which the particle size was 200 mesh and temperature of 750 oC. The heating value of biobriquette were compared with Indonesian National Standardization (SNI), which met with the standard of heating value (5000 cal/g).

Jaringan kolaborasi para penulis

40 penulis · 169 tautan kepenulisan bersama · 2 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sriwijaya University
  • Sumatera Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Aldes LesbaniSriwijaya University16
Neza Rahayu PalapaSriwijaya University7
Alfan WijayaSriwijaya University5
Mardiyanto MardiyantoSriwijaya University5
Nur AhmadSriwijaya University4
Yulizah HanifahSriwijaya University4
Tarmizi TaherSriwijaya University4
Idha RoyaniSriwijaya University3
Hilda ZulkifliSriwijaya University3
Muhammad Djoni BustanSriwijaya University2
Nova YuliasariSriwijaya University2
Amri AmriSriwijaya University2
Sahrul WibiyanSriwijaya University2
Yusuf Mathiinul HakimSriwijaya University2
Arini Fousty BadriSriwijaya University2
NormahSriwijaya University2
Patimah Mega Syah Bahar Nur SiregarSriwijaya University2
Novie JuleantiSriwijaya University2
Eliza ElizaSriwijaya University2
Wika Atro AuriyaniSumatera Institute of Technology1
Elfita ElfitaSriwijaya University1
Zaqiya Artha ZaharaSriwijaya University1
Rohmatullaili RohmatullailiSriwijaya University1
Rahma Dinta AstutiSriwijaya University1
Aldes Lesbani Aldes LesbaniAfiliasi tidak diketahui1
Marieska VerawatySriwijaya University1
Agnes AgnesSriwijaya University1
Randi O. SaragihSriwijaya University1
Suheryanto SuheryantoSriwijaya University1
Addy RachmatSriwijaya University1
Bakri Rio RahayuSriwijaya University1
Fitri Suryani ArsyadSriwijaya University1
MardiyantoAfiliasi tidak diketahui1
AmriAfiliasi tidak diketahui1
ElfitaAfiliasi tidak diketahui1
Satria Jaya PriatnaSriwijaya University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://sciencetechindonesia.com/index.php/jsti/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Influence of Temperature and Particle Size on Heating Value of Biobriquette from Rubber Seed</dc:title>
	<dc:creator>Armita, Tiara</dc:creator>
	<dc:creator>Haryati, Sri</dc:creator>
	<dc:creator>Mohadi, Risfidian</dc:creator>
	<dc:creator>Wardhani, Puteri Kusuma</dc:creator>
	<dc:description xml:lang="en-US">Rubber seed as a biomass is potentially used as the source of alternative energy in briquette. Previous research had found that rubber seed briquette has the highest heating value of 6287,8 cal/g. It can be increased by varying temperature and mesh size. In this research, the effect of temperature and particle size on the amount of heat of rubber seed biobriquette from Muarakuang (Batu Raja) was investigated. It was done in Politeknik Negeri Sriwijaya Palembang laboratory. Proximate analysis was executed in Politeknik Negeri Sriwijaya Palembang coal laboratory. The temperature varied of 250 oC, 500 oC,&amp;nbsp; and 750 oC with the particle size varied by 80 mesh, 120 mesh, and 200 mesh. Quality test of fabricated biobriquette consisted of proximate analysis such as calorific value, inherent moisture, ash ratio, volatile matter ratio, and fixed carbon ratio. The highest of heating value was 6836 cal/g from biobriquette sample were found under particle size of 80 mesh and temperature of 250 oC. The heating value reached 5371 cal/g which the particle size was 200 mesh and temperature of 750 oC. The heating value of biobriquette were compared with Indonesian National Standardization (SNI), which met with the standard of heating value (5000 cal/g).</dc:description>
	<dc:publisher xml:lang="en-US">Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya</dc:publisher>
	<dc:date>2019-05-02</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://sciencetechindonesia.com/index.php/jsti/article/view/128</dc:identifier>
	<dc:identifier>10.26554/sti.2019.4.2.57-59</dc:identifier>
	<dc:source xml:lang="en-US">Science and Technology Indonesia; Vol. 4 No. 2 (2019): April; 57-59</dc:source>
	<dc:source>2580-4391</dc:source>
	<dc:source>2580-4405</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://sciencetechindonesia.com/index.php/jsti/article/view/128/111</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 Tiara Armita, Sri Haryati, Risfidian Mohadi, Puteri Kusuma Wardhani</dc:rights>
</oai_dc:dc>