Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

FOAMING CAN REDUCE LUBRICATION OF LUBRICANTS SO CAUSING WEAR

Scientific Contributions Oil and Gas · Vol. 41 No. 3 (2020) · hlm. 137–143

DOI
10.29017/SCOG.41.3.332
ISSN
2541-0520, 2089-3361
Terbit
2020-06-22
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Foaming on oil has a very undesirable effect which can cause an increase in oxidation by intensive mixture with air, damage to cavitation, and insufficient oil transportation in the lubrication circulation system which can cause poor lubrication. Adding the appropriate antifoam additives is one way to avoidfoaming. To determine the tendency of foaming formation which has an impact on the stability of the performance of lubricating oil, so that there is wear and tear in research in the laboratory by means of; 6 types of lubricating oil taken from the market are tested for viscosity, index viscosity, flash point, pour point and color. As well as to determine the effect of foam formation tested foaming tendency / stability and wear before and after antifoam added from 6 (six) types of lubricated oil obtained from the market. The result after adding antifoam additives, three types (GB, SH, and MH) of six types of lubricated oil were tested, the tendency of foaming and the wear results met the required limits, namely 0/50/0 ml for foaming tendency and maximum 0.5 mm for wear, while for 3 (three) oils, the results are not satisfying the required limits.

Kata kunci

Jaringan kolaborasi para penulis

11 penulis · 23 tautan kepenulisan bersama · 8 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Indonesia
  • Kementerian Energi dan Sumber Daya Mineral
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Setyo WidodoAfiliasi tidak diketahui3
Muhammad Faja TaufiqurrahmanUniversity of Indonesia1
Tri Aji SetyawanUniversity of Indonesia1
Riesta AnggaraniKementerian Energi dan Sumber Daya Mineral1
Cahyo Setyo WibowoKementerian Energi dan Sumber Daya Mineral1
Bambang SugiartoUniversity of Indonesia1
Milda FibreAfiliasi tidak diketahui1
Nofrijon SofyanAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">FOAMING CAN REDUCE LUBRICATION OF LUBRICANTS SO CAUSING WEAR</dc:title>
	<dc:creator xml:lang="en">Karina, Rona Malam</dc:creator>
	<dc:creator xml:lang="en">Hanifuddin, M</dc:creator>
	<dc:creator xml:lang="en">Wibowo, Setyo</dc:creator>
	<dc:subject xml:lang="en">foaming</dc:subject>
	<dc:subject xml:lang="en">antifoam polydimethylsiloxane</dc:subject>
	<dc:subject xml:lang="en">wear</dc:subject>
	<dc:description xml:lang="en">Foaming on oil has a very undesirable effect which can cause an increase in oxidation by intensive mixture with air, damage to cavitation, and insufficient oil transportation in the lubrication circulation system which can cause poor lubrication. Adding the appropriate antifoam additives is one way to avoidfoaming. To determine the tendency of foaming formation which has an impact on the stability of the performance of lubricating oil, so that there is wear and tear in research in the laboratory by means of; 6 types of lubricating oil taken from the market are tested for viscosity, index viscosity, flash point, pour point and color. As well as to determine the effect of foam formation tested foaming tendency / stability and wear before and after antifoam added from 6 (six) types of lubricated oil obtained from the market. The result after adding antifoam additives, three types (GB, SH, and MH) of six types of lubricated oil were tested, the tendency of foaming and the wear results met the required limits, namely 0/50/0 ml for foaming tendency and maximum 0.5 mm for wear, while for 3 (three) oils, the results are not satisfying the required limits.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2020-06-22</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/332</dc:identifier>
	<dc:identifier>10.29017/SCOG.41.3.332</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 41 No. 3 (2018); 137 - 143</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 41 No 3 (2018); 137 - 143</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/332/192</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2020 SCIENTIFIC CONTRIBUTIONS OIL AND GAS (SCOG)</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>