Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

THE PREFERENTIAL WELD CORROSION OF X65 CARBON STEEL PIPELINE UNDER CO2 ENVIRONMENT

Scientific Contributions Oil and Gas · Vol. 42 No. 1 (2020) · hlm. 15–28

DOI
10.29017/SCOG.42.1.387
ISSN
2541-0520, 2089-3361
Terbit
2020-08-06
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Preferential weld corrosion (PWC) is a severe corrosion form of attack found in pipeline weldments in oil and gas industries. PWC occurs when the corrosion rate of the weld metal (WM) and heat affected zone (HAZ) is higher than the parent metal (PM). PWC was generated by galvanic corrosion mechanism due to dissimilarities in the composition and microstructure of the metal in the three weld regions.The aim of this research is to study the effect of flow rate on preferential weld corrosion (PWC) in X65 high strength pipeline steel using submerged jet impingement by investigating the mechanism of PWC on a weldment in artificial seawater saturated with carbon dioxide at 1 bar. A novel submerged jet impingement apparatus that consist of 3 rings (outer, inner and centre) was designed so that the parent material, heat affected zone and weld metal could be analysed in a high shear stress environment. Corrosion experiments were performed with X65 pipeline steel under no flow and flowing condition at 10 m/s at 30oC and pH4. The galvanic current characteristic between the weldment regions was recorded using a zero-resistance ammeter, and the self-corrosion was analysed by using linear polarisation resistance measurements. Total corrosion rates were calculated from the sum of the galvanic and self-corrosion contributions. The morphology, structure, chemical on the surface of X65 after corrosion process was investigated by means of scanning electron microscopy (SEM) and focus ion beam (FIB) to examine the corrosion product that form in brine containing dissolved carbon dioxide.In a no-flow condition, the result shows that the galvanic characteristics on all weldments were similar and the WM is cathodic and protected in comparison with the HAZ and PM. In flowing condition, the estimated flow rates associated with the different positions on the target vary depending on either (a) PM and HAZ or (b) the WM. The effects of target flow rate on WM have a similar trend, but the overall corrosion rates are greater due to PWC. The result of surface analysis after corrosion process showing that removal of hardened layer and subsurface cracking were causes of enhanced degradation.

Kata kunci

Jaringan kolaborasi para penulis

16 penulis · 43 tautan kepenulisan bersama · 31 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Syarif Hidayatullah State Islamic University Jakarta
  • Universiti Sains Malaysia
  • Kementerian Energi dan Sumber Daya Mineral
  • State University of Jakarta
  • National Research and Innovation Agency
  • Pertamina (Indonesia)
  • Institut Teknologi Sepuluh Nopember
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Meyliana WulandariState University of Jakarta4
Pandian Bothi RajaUniversiti Sains Malaysia3
Lisna RosmayatiAfiliasi tidak diketahui1
Yayun AndrianiAfiliasi tidak diketahui1
Isalmi AzizSyarif Hidayatullah State Islamic University Jakarta1
Verawati VerawatiSyarif Hidayatullah State Islamic University Jakarta1
Rachmi KartiniAfiliasi tidak diketahui1
Syed Azhar Syed SulaimanUniversiti Sains Malaysia1
Andreas AndreasNational Research and Innovation Agency1
Zahratussaadah ZahratussaadahSyarif Hidayatullah State Islamic University Jakarta1
Wawan RustyawanPertamina (Indonesia)1
Nesya JuniarSyarif Hidayatullah State Islamic University Jakarta1
Stella JovitaInstitut Teknologi Sepuluh Nopember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">THE PREFERENTIAL WELD CORROSION OF X65 CARBON STEEL PIPELINE UNDER CO2  ENVIRONMENT</dc:title>
	<dc:creator xml:lang="en">Nofrizal, Nofrizal</dc:creator>
	<dc:creator xml:lang="en">Impey, Susan A</dc:creator>
	<dc:creator xml:lang="en">Georgarakis, Konstantinos</dc:creator>
	<dc:subject xml:lang="en">Preferential weld corrosion</dc:subject>
	<dc:subject xml:lang="en">carbon dioxide</dc:subject>
	<dc:subject xml:lang="en">electrochemical measurements</dc:subject>
	<dc:subject xml:lang="en">submerged jet impingement</dc:subject>
	<dc:description xml:lang="en">Preferential weld corrosion (PWC) is a severe corrosion form of attack found in pipeline weldments in oil and gas industries. PWC occurs when the corrosion rate of the weld metal (WM) and heat affected zone (HAZ) is higher than the parent metal (PM). PWC was generated by galvanic corrosion mechanism due to dissimilarities in the composition and microstructure of the metal in the three weld regions.The aim of this research is to study the effect of flow rate on preferential weld corrosion (PWC) in X65 high strength pipeline steel using submerged jet impingement by investigating the mechanism of PWC on a weldment in artificial seawater saturated with carbon dioxide at 1 bar. A novel submerged jet impingement apparatus that consist of 3 rings (outer, inner and centre) was designed so that the parent material, heat affected zone and weld metal could be analysed in a high shear stress environment. Corrosion experiments were performed with X65 pipeline steel under no flow and flowing condition at 10 m/s at 30oC and pH4. The galvanic current characteristic between the weldment regions was recorded using a zero-resistance ammeter, and the self-corrosion was analysed by using linear polarisation resistance measurements. Total corrosion rates were calculated from the sum of the galvanic and self-corrosion contributions. The morphology, structure, chemical on the surface of X65 after corrosion process was investigated by means of scanning electron microscopy (SEM) and focus ion beam (FIB) to examine the corrosion product that form in brine containing dissolved carbon dioxide.In a no-flow condition, the result shows that the galvanic characteristics on all weldments were similar and the WM is cathodic and protected in comparison with the HAZ and PM. In flowing condition, the estimated flow rates associated with the different positions on the target vary depending on either (a) PM and HAZ or (b) the WM. The effects of target flow rate on WM have a similar trend, but the overall corrosion rates are greater due to PWC. The result of surface analysis after corrosion process showing that removal of hardened layer and subsurface cracking were causes of enhanced degradation.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2020-08-06</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/387</dc:identifier>
	<dc:identifier>10.29017/SCOG.42.1.387</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 42 No. 1 (2019); 15 - 28</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 42 No 1 (2019); 15 - 28</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/387/pdf_1</dc:relation>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/387/pdf</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2020 SCIENTIFIC CONTRIBUTIONS OIL AND GAS (SCOG)</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>