Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Evaluation of Chemical for Sand Consolidation in Laboratory Scale

Scientific Contributions Oil and Gas · Vol. 43 No. 1 (2020) · hlm. 17–29

DOI
10.29017/SCOG.43.1.391
ISSN
2541-0520, 2089-3361
Terbit
2020-04-20
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

These paper contains a highlight of laboratory experiment to evaluate the work of chemical for sand consolidation to strengthen the bonding between grains of rock while do not cause permeability reduction significantly. This experiment used reservoir rock and fluids to understand the interaction between the chemical solution and the reservoir rock and fluid. Firstly, the reservoir rock and fluid were analyzed their properties. The rock has been analyzed using CT Scan to drill the best representative core plug for the experiments, using SEM to identify the pore throat and pore geometry of the rock, using XRD to determine the minerals composition which mostly quartz. While the fluids have been analyzed for the anions and cations content, viscosity and other important properties. The brine particle content and also particle size distribution of the rock have been also over lied in the graph in order to know the possibility of bridging particle in the pore throat, but the graph looks good that no problem may arise from the bridging particle. Chemical for Sand Consolidation has been used in this experiment. Sand consolidation chemical normally contain plastic resin that has a property of bonding between solid materials. It sticks on the surface of solid materials and bonding together.The core flooding experiments have been run for 4 times, 2 times using synthetic cores and the other two using native cores. The experiments used synthetic cores reduce the permeability significantly. However, after cutting both ends of the core the permeability has indicated improvement. The other 2 experiments using native cores have reduced the permeability approximately 4 times down. The last two experiments have no cutting the ends of core for further experiments, so they cannot be compared to the first two experiment. So, the experiment procedures must be improved for the next evaluation, such as during curing time the rate of injected oil may be increased to reduce the adsorption of chemical to the surface area of the pore and also to hinder the flocculation of chemical in the pore space.

Kata kunci

Jaringan kolaborasi para penulis

15 penulis · 56 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Research and Innovation Agency
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Utomo Pratama IskandarAfiliasi tidak diketahui2
Usman PasaraiNational Research and Innovation Agency1
Herru Lastiadi SAfiliasi tidak diketahui1
Edward ML TobingAfiliasi tidak diketahui1
Usman UsmanAfiliasi tidak diketahui1
Usman UsmanNational Research and Innovation Agency1
Tri Muji SusantoroNational Research and Innovation Agency1
Djoko SunarjantoNational Research and Innovation Agency1
Suliantara SuliantaraNational Research and Innovation Agency1
Bambang WidarsonoNational Research and Innovation Agency1
Herru Lastiadi SetiawanNational Research and Innovation Agency1
Panca WahyudiNational Research and Innovation Agency1
Mohamad RomliNational Research and Innovation Agency1
Diana DwiyanartiNational Research and Innovation Agency1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Evaluation of Chemical for Sand Consolidation in Laboratory Scale</dc:title>
	<dc:creator xml:lang="en">Sugihardjo, Sugihardjo</dc:creator>
	<dc:subject xml:lang="en">Chemical-resin</dc:subject>
	<dc:subject xml:lang="en">sand problem</dc:subject>
	<dc:subject xml:lang="en">sand control</dc:subject>
	<dc:subject xml:lang="en">sand consolidation</dc:subject>
	<dc:description xml:lang="en">These paper contains a highlight of laboratory experiment to evaluate the work of chemical for sand consolidation to strengthen the bonding between grains of rock while do not cause permeability reduction significantly. This experiment used reservoir rock and fluids to understand the interaction between the chemical solution and the reservoir rock and fluid. Firstly, the reservoir rock and fluid were analyzed their properties. The rock has been analyzed using CT Scan to drill the best representative core plug for the experiments, using SEM to identify the pore throat and pore geometry of the rock, using XRD to determine the minerals composition which mostly quartz. While the fluids have been analyzed for the anions and cations content, viscosity and other important properties. The brine particle content and also particle size distribution of the rock have been also over lied in the graph in order to know the possibility of bridging particle in the pore throat, but the graph looks good that no problem may arise from the bridging particle. Chemical for Sand Consolidation has been used in this experiment. Sand consolidation chemical normally contain plastic resin that has a property of bonding between solid materials. It sticks on the surface of solid materials and bonding together.The core flooding experiments have been run for 4 times, 2 times using synthetic cores and the other two using native cores. The experiments used synthetic cores reduce the permeability significantly. However, after cutting both ends of the core the permeability has indicated improvement. The other 2 experiments using native cores have reduced the permeability approximately 4 times down. The last two experiments have no cutting the ends of core for further experiments, so they cannot be compared to the first two experiment. So, the experiment procedures must be improved for the next evaluation, such as during curing time the rate of injected oil may be increased to reduce the adsorption of chemical to the surface area of the pore and also to hinder the flocculation of chemical in the pore space.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2020-04-20</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/391</dc:identifier>
	<dc:identifier>10.29017/SCOG.43.1.391</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 43 No. 1 (2020); 17-29</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 43 No 1 (2020); 17-29</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/391/pdf_1</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2020 © Copyright by Authors. Published by LEMIGAS</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>