Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

INTEGRATED INITIAL WATER SATURATION MODELLING

Scientific Contributions Oil and Gas · Vol. 42 No. 3 (2019) · hlm. 95–107

DOI
10.29017/SCOG.42.3.396
ISSN
2541-0520, 2089-3361
Terbit
2019-12-06
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

This study presents a new approach to estimate initial water saturation. The initial water saturation is determined by integrating formation tester (RFT), drill stem test (DST), well logging, and laboratory measurement (RCAL & SCAL) data. This method utilizes Brook-Correy’s parametrical equation to determine synthetic capillary pressure and initial water saturation as a function of depth and rock type. Rock type and permeability are distributed vertically by using well log interpretation. DST and formation tester data are used to control the initial water saturation calculation. The calculation needs to iterate Brook-Correy’s constant by using solver until the results are matching with all data. The precise step of this method is presented by using synthetic data (ideal reservoir characteristic). Case studies are provided for testing the proposed method. The product of this study is essential where well log data could be changed by time (production activity) and core measurement data are very limited. The results of case studies demonstrate that the method is not affected by rock mineralogy or reservoir condition. This new approach is successfully integrated and matched with field and laboratory measurement data. Moreover, the method could be applied in any reservoir.

Kata kunci

Jaringan kolaborasi para penulis

24 penulis · 75 tautan kepenulisan bersama · 23 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Sains Bandung
  • Bandung Institute of Technology
  • Universitas Bhayangkara Jakarta Raya
  • Infosys (India)
  • Chulalongkorn University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ary ArtantyAfiliasi tidak diketahui1
Trinovandhi SetyawanAfiliasi tidak diketahui1
Paulus Rah Adi PawitraAfiliasi tidak diketahui1
Shinta Mashito WindriyaniAfiliasi tidak diketahui1
Ahmad JunaidiAfiliasi tidak diketahui1
Yuskhil MushofiAfiliasi tidak diketahui1
Adam Putra Pratama ZainuriAfiliasi tidak diketahui1
Pahala Dominicus SinuratBandung Institute of Technology1
Hari SasongkoInfosys (India)1
SudonoAfiliasi tidak diketahui1
Prasandi Abdul AzizBandung Institute of Technology1
Najeela Faza RamadhaniBandung Institute of Technology1
Widia YantiChulalongkorn University1
Berkah HaniUniversitas Bhayangkara Jakarta Raya1
Wahyu SutresnoUniversitas Bhayangkara Jakarta Raya1
Wiwiek JumiatiInstitut Teknologi Sains Bandung1
Hawa Syuraih GhaziyahInstitut Teknologi Sains Bandung1
Karyanto HerlambangInstitut Teknologi Sains Bandung1
Agli Tori CelliInstitut Teknologi Sains Bandung1
Gilang Saputra WibowoInstitut Teknologi Sains Bandung1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">INTEGRATED INITIAL WATER SATURATION MODELLING</dc:title>
	<dc:creator xml:lang="en">Wihdany, Falza Izza</dc:creator>
	<dc:creator xml:lang="en">Irawan, Dedy</dc:creator>
	<dc:creator xml:lang="en">Utomo, Muhammad Rakha</dc:creator>
	<dc:creator xml:lang="en">Fitro, Agung Mubaroqan</dc:creator>
	<dc:subject xml:lang="en">initial water saturation</dc:subject>
	<dc:subject xml:lang="en">capillary pressure</dc:subject>
	<dc:subject xml:lang="en">formation tester</dc:subject>
	<dc:subject xml:lang="en">drill stem test</dc:subject>
	<dc:subject xml:lang="en">well logging</dc:subject>
	<dc:subject xml:lang="en">core measurement.</dc:subject>
	<dc:description xml:lang="en">This study presents a new approach to estimate initial water saturation. The initial water saturation is determined by integrating formation tester (RFT), drill stem test (DST), well logging, and laboratory measurement (RCAL &amp;amp; SCAL) data. This method utilizes Brook-Correy’s parametrical equation to determine synthetic capillary pressure and initial water saturation as a function of depth and rock type. Rock type and permeability are distributed vertically by using well log interpretation. DST and formation tester data are used to control the initial water saturation calculation. The calculation needs to iterate Brook-Correy’s constant by using solver until the results are matching with all data. The precise step of this method is presented by using synthetic data (ideal reservoir characteristic). Case studies are provided for testing the proposed method. The product of this study is essential where well log data could be changed by time (production activity) and core measurement data are very limited. The results of case studies demonstrate that the method is not affected by rock mineralogy or reservoir condition. This new approach is successfully integrated and matched with field and laboratory measurement data. Moreover, the method could be applied in any reservoir.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2019-12-06</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/396</dc:identifier>
	<dc:identifier>10.29017/SCOG.42.3.396</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 42 No. 3 (2019); 95 - 107</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 42 No 3 (2019); 95 - 107</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/396/pdf</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2019 SCIENTIFIC CONTRIBUTIONS OIL AND GAS (SCOG)</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>