Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

SUBSTITUTION OF PETROLEUM BASE WITH MES BASE SURFACTANT FOR EOR: LABORATORY SCREENING

Scientific Contributions Oil and Gas · Vol. 37 No. 1 (2022) · hlm. 35–44

DOI
10.29017/SCOG.37.1.622
ISSN
2541-0520, 2089-3361
Terbit
2022-02-14
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Most of Indonesian oil fi eld had been categorized as mature fi led in which production had been declinedfor some time. Therefore EOR (Enhanced Oil Recovery) technology is a must to be implemented to thesekinds of fi eld. There are several EOR technologies had been employed successfully in laboratory and alsofi eld scales, including gas, thermal, and chemical injection. Most Indonesian oil fi elds have productivelayers depths below 2200ft that will not suitable for gas injection. So that chemical injections become animportant alternative that can be implemented to more wide range of depths. These technologies coveralkaline, surfactant, and polymer injection. This paper will highlight the selection and formulation ofsurfactant formulated from MES (Methyl Ester Sulfonates) produced from Palm Oils. These palm oils areavailable very abundant in Indonesia due to plenty farm palm oil in Indonesia. Normally Surfactants areformulated from petroleum sulfonates which are generated from petroleum base. By Using Surfactant that willbe manufactured from palm oil, it will be expected that the price will be cheaper compare to the surfactantfrom petroleum. A series of researches have been done to select the sources of palm oils, producing MESby sulfonation processes, and fi nally surfactant screening for EOR. Several types of MES produced fromvaries of palm oil taken from market such as: CPO (crude palm oil), several packed palm oils of differenttrademarks have been generated. These MES, then, have been given codes to differentiate among these MESsuch as: 1. CCO-MES (A), 2. CCO ME-MES (B), 3. Oleic Acid- MES (C), 4. Natrium Bisulfi t- MES1 (D),5. ME+H2SO4-MES2 (E), 6. CPO-MES (F). These MES production, then, have been formulated to becomesurfactant formula by adding some chemicals and solvent. After that alkaline ((Na2CO3) with optimizedconcentrations were added to generate the best EOR properties. All those Surfactant-MES have been testedusing Lemigas standard laboratory EOR screening; those are compatibility tests, IFT measurements, thermalstability, adsorption, fi ltration, phase behavior, imbibitions and core fl ooding. The result of the screening ofthe MES-chemicals mixtures shows that mixture of CPO-MES (F) with chemical and solvent with the mixturecomposition denoted as FChS811 has the best performance. 1% of this mixture has the best properties forEOR after adding 0.1% of Alkaline (Na2CO3). Laboratory test results indicates that fulfi ll screening criteriasuh as good compatibility and no precipitation, low IFT, thermal stability, low adsorption, low fi ltrationratio, Winsor type-I phase behavior, high RF on imbibition and core fl ooding tests. This Surfactant-MESmixture has a potential to be implemented for a fi eld trial with Huff and Puff method.

Kata kunci

Jaringan kolaborasi para penulis

10 penulis · 23 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indonesian Institute of Sciences
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Yan IrawanIndonesian Institute of Sciences1
Yani Faozani AlliAfiliasi tidak diketahui1
Letty BriolettyAfiliasi tidak diketahui1
Dadan DSM SaputraAfiliasi tidak diketahui1
Bayu Dedi PrasetiyoAfiliasi tidak diketahui1
Yudha TaufantriAfiliasi tidak diketahui1
Ghifahri DamaraAfiliasi tidak diketahui1
Yusuf D RendragrahaAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">SUBSTITUTION OF PETROLEUM BASE WITH MES BASE SURFACTANT FOR EOR: LABORATORY SCREENING</dc:title>
	<dc:creator xml:lang="en">Sugihardjo, Sugihardjo</dc:creator>
	<dc:creator xml:lang="en">Eni, Hestuti</dc:creator>
	<dc:subject xml:lang="en">MES (Methyl Ester Sulfonates)</dc:subject>
	<dc:subject xml:lang="en">EOR (Enhanced Oil Recovery)</dc:subject>
	<dc:subject xml:lang="en">RF (Recovery Factor)</dc:subject>
	<dc:description xml:lang="en">Most of Indonesian oil fi eld had been categorized as mature fi led in which production had been declinedfor some time. Therefore EOR (Enhanced Oil Recovery) technology is a must to be implemented to thesekinds of fi eld. There are several EOR technologies had been employed successfully in laboratory and alsofi eld scales, including gas, thermal, and chemical injection. Most Indonesian oil fi elds have productivelayers depths below 2200ft that will not suitable for gas injection. So that chemical injections become animportant alternative that can be implemented to more wide range of depths. These technologies coveralkaline, surfactant, and polymer injection. This paper will highlight the selection and formulation ofsurfactant formulated from MES (Methyl Ester Sulfonates) produced from Palm Oils. These palm oils areavailable very abundant in Indonesia due to plenty farm palm oil in Indonesia. Normally Surfactants areformulated from petroleum sulfonates which are generated from petroleum base. By Using Surfactant that willbe manufactured from palm oil, it will be expected that the price will be cheaper compare to the surfactantfrom petroleum. A series of researches have been done to select the sources of palm oils, producing MESby sulfonation processes, and fi nally surfactant screening for EOR. Several types of MES produced fromvaries of palm oil taken from market such as: CPO (crude palm oil), several packed palm oils of differenttrademarks have been generated. These MES, then, have been given codes to differentiate among these MESsuch as: 1. CCO-MES (A), 2. CCO ME-MES (B), 3. Oleic Acid- MES (C), 4. Natrium Bisulfi t- MES1 (D),5. ME+H2SO4-MES2 (E), 6. CPO-MES (F). These MES production, then, have been formulated to becomesurfactant formula by adding some chemicals and solvent. After that alkaline ((Na2CO3) with optimizedconcentrations were added to generate the best EOR properties. All those Surfactant-MES have been testedusing Lemigas standard laboratory EOR screening; those are compatibility tests, IFT measurements, thermalstability, adsorption, fi ltration, phase behavior, imbibitions and core fl ooding. The result of the screening ofthe MES-chemicals mixtures shows that mixture of CPO-MES (F) with chemical and solvent with the mixturecomposition denoted as FChS811 has the best performance. 1% of this mixture has the best properties forEOR after adding 0.1% of Alkaline (Na2CO3). Laboratory test results indicates that fulfi ll screening criteriasuh as good compatibility and no precipitation, low IFT, thermal stability, low adsorption, low fi ltrationratio, Winsor type-I phase behavior, high RF on imbibition and core fl ooding tests. This Surfactant-MESmixture has a potential to be implemented for a fi eld trial with Huff and Puff method.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2022-02-14</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/622</dc:identifier>
	<dc:identifier>10.29017/SCOG.37.1.622</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 37 No. 1 (2014); 35-44</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 37 No 1 (2014); 35-44</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/622/pdf</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2022 SCIENTIFIC CONTRIBUTIONS OIL AND GAS (SCOG)</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>