Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

The Advantage Of Oil Content In Injection Water Determination Before Implementation Of Waterflood In Oilfield

Scientific Contributions Oil and Gas · Vol. 33 No. 1 (2022) · hlm. 44–51

DOI
10.29017/SCOG.33.1.807
ISSN
2541-0520, 2089-3361
Terbit
2022-02-15
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Before implementation of water flooding in oilfield, it will be good to determine oil content in the injection water. The results of laboratory tests provide valuable and useful information, firstly, whether reverse demulsifier is required or not to reduce oil content in water. Secondly, the test results can select the effective reverse demulsifier. S1 and S2 injection water contain very low oil content, so it is not necessary to add reverse demulsifier in the both injection water. High oil content is obtained in S3 injection. The 50 mg/L DKM reverse demulsifier does not work effectively to reduce oil content in the S3 injection water. Whereas, the 50 mg/L Prolab reverse demulsifier is effective and able to reduce oil content sharply in the S3 injection water with 95.46 % efficiency.

Kata kunci

Jaringan kolaborasi para penulis

7 penulis · 8 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Halu Oleo
  • State University of Semarang
  • Universitas Islam Negeri Ar-Raniry
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nuraini NurainiUniversitas Halu Oleo4
Panca WahyudiAfiliasi tidak diketahui2
Supriyatno SupriyatnoState University of Semarang1
Nuraini NurainiUniversitas Islam Negeri Ar-Raniry1
Hadi PoernomoAfiliasi tidak diketahui1
Hadi PurnomoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The Advantage Of Oil Content In Injection Water Determination Before Implementation Of Waterflood In Oilfield</dc:title>
	<dc:creator xml:lang="en">Makmur, Tjuwati</dc:creator>
	<dc:subject xml:lang="en">Oil contents</dc:subject>
	<dc:subject xml:lang="en">injection water</dc:subject>
	<dc:subject xml:lang="en">methodology</dc:subject>
	<dc:subject xml:lang="en">emulsion block</dc:subject>
	<dc:subject xml:lang="en">reverse demulsifier</dc:subject>
	<dc:description xml:lang="en">Before implementation of water flooding in oilfield, it will be good to determine oil content in the injection water. The results of laboratory tests provide valuable and useful information, firstly, whether reverse demulsifier is required or not to reduce oil content in water. Secondly, the test results can select the effective reverse demulsifier. S1 and S2 injection water contain very low oil content, so it is not necessary to add reverse demulsifier in the both injection water. High oil content is obtained in S3 injection. The 50 mg/L DKM reverse demulsifier does not work effectively to reduce oil content in the S3 injection water. Whereas, the 50 mg/L Prolab reverse demulsifier is effective and able to reduce oil content sharply in the S3 injection water with 95.46 % efficiency.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2022-02-15</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/807</dc:identifier>
	<dc:identifier>10.29017/SCOG.33.1.807</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 33 No. 1 (2010); 44-51</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 33 No 1 (2010); 44-51</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/807/593</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 1970 SCIENTIFIC CONTRIBUTIONS OIL AND GAS (SCOG)</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>