Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

The Use Of Laboratory Tests To Study Oil Content In Injection Water Which Tend To Form Emulsion Block And Can Cause Plugging In Reservoir Rock

Scientific Contributions Oil and Gas · Vol. 31 No. 1 (2022) · hlm. 20–24

DOI
10.29017/SCOG.31.1.858
ISSN
2541-0520, 2089-3361
Terbit
2022-03-21
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Oil content plays important role in determining injection water quality before the injection water is injected into reservoir for water flooding need. Determination of oil contents laboratory tests were carried out on five injection water samples from different gathering stations. The results of tests show that two of five injection water samples contain oil contents which fulfill MIGAS guidelines (25 ppm) requirements specification. Whereas, oil contents in the three injection water samples are in a range of 38.00 ppm and 77.00 ppm. The values of oil contents exceed MIGAS guidelines and tend to form emulsion block and cause the occurrence of plugging in reservoir rock.

Kata kunci

Jaringan kolaborasi para penulis

7 penulis · 8 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Halu Oleo
  • State University of Semarang
  • Universitas Islam Negeri Ar-Raniry
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nuraini NurainiUniversitas Halu Oleo4
Panca WahyudiAfiliasi tidak diketahui2
Supriyatno SupriyatnoState University of Semarang1
Nuraini NurainiUniversitas Islam Negeri Ar-Raniry1
Hadi PoernomoAfiliasi tidak diketahui1
Hadi PurnomoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The Use Of Laboratory Tests To Study Oil Content In Injection Water Which Tend To Form Emulsion Block And Can Cause Plugging In Reservoir Rock</dc:title>
	<dc:creator xml:lang="en">Makmur, Tjuwati</dc:creator>
	<dc:subject xml:lang="en">il contents</dc:subject>
	<dc:subject xml:lang="en">injection water</dc:subject>
	<dc:subject xml:lang="en">identification</dc:subject>
	<dc:subject xml:lang="en">emulsion block</dc:subject>
	<dc:subject xml:lang="en">plugging</dc:subject>
	<dc:subject xml:lang="en">formation.</dc:subject>
	<dc:description xml:lang="en">Oil content plays important role in determining injection water quality before the injection water is injected into reservoir for water flooding need. Determination of oil contents laboratory tests were carried out on five injection water samples from different gathering stations. The results of tests show that two of five injection water samples contain oil contents which fulfill MIGAS guidelines (25 ppm) requirements specification. Whereas, oil contents in the three injection water samples are in a range of 38.00 ppm and 77.00 ppm. The values of oil contents exceed MIGAS guidelines and tend to form emulsion block and cause the occurrence of plugging in reservoir rock.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2022-03-21</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/858</dc:identifier>
	<dc:identifier>10.29017/SCOG.31.1.858</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 31 No. 1 (2008); 20-24</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 31 No 1 (2008); 20-24</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/858/643</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 1970 SCIENTIFIC CONTRIBUTIONS OIL AND GAS (SCOG)</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>