Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

DETERMINATION OF OIL RECOVERY FACTOR BY USING WATER INJECTION-LABORATORY TEST METHOD

Scientific Contributions Oil and Gas · Vol. 28 No. 1 (2022) · hlm. 18–22

DOI
10.29017/SCOG.28.1.1035
ISSN
2541-0520, 2089-3361
Terbit
2022-03-30
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Oil production limit that is usually followed by decrease of oil productivity in old fields is a major problem and can't be avoided. This case happened when cumulative oil production has approached primary recovery method. Decrease of the action of native reservoir energy is followed by drastically increase of production of water (saturation almost 100 %). In relation to this, a method is needed to obtain the additional oil recovery. Water injection method is one of the solutions to solve oil production problem that happened in old fields. It is expected that by using water injection method, productivity and oil recovery in old fields can be improved. Water that is used as the fluid injected into reservoir to improve oil recovery is sea water. How far oil recovery can be improved by using water injection method, is determined by a laboratory research. Before carrying out water injection laboratory test; one has to know what the main points that play important role in determining the optimal oil recovery by water injection method. These are: firstly, reservoir data, secondly, formation water and sea water analysis, thirdly, determination of physical fluid and rock properties, next, the displacement of water injection process to obtain the additional oil recovery and standard operational procedure. The main focus of this paper is "Determination of Oil Recovery Factor By Using Water Injection-Laboratory Test Method ". Hopefully, the contents of this paper give extremely valuable and useful information not only for LEMIGAS as Research and Development Centre for Oil and Gas Technology, but also for the oil industry or the Department of Petroleum Engineering of the universities in Indonesia.

Kata kunci

Jaringan kolaborasi para penulis

7 penulis · 8 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Halu Oleo
  • State University of Semarang
  • Universitas Islam Negeri Ar-Raniry
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nuraini NurainiUniversitas Halu Oleo4
Panca WahyudiAfiliasi tidak diketahui2
Supriyatno SupriyatnoState University of Semarang1
Nuraini NurainiUniversitas Islam Negeri Ar-Raniry1
Hadi PoernomoAfiliasi tidak diketahui1
Hadi PurnomoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">DETERMINATION OF OIL RECOVERY FACTOR BY USING WATER INJECTION-LABORATORY TEST METHOD</dc:title>
	<dc:creator xml:lang="en">Makmur, Tjuwati</dc:creator>
	<dc:subject xml:lang="en">Determination</dc:subject>
	<dc:subject xml:lang="en">Injection-Laboratory</dc:subject>
	<dc:subject xml:lang="en">Method</dc:subject>
	<dc:description xml:lang="en">Oil production limit that is usually followed by decrease of oil productivity in old fields is a major problem and can't be avoided. This case happened when cumulative oil production has approached primary recovery method. Decrease of the action of native reservoir energy is followed by drastically increase of production of water (saturation almost 100 %). In relation to this, a method is needed to obtain the additional oil recovery. Water injection method is one of the solutions to solve oil production problem that happened in old fields. It is expected that by using water injection method, productivity and oil recovery in old fields can be improved. Water that is used as the fluid injected into reservoir to improve oil recovery is sea water. How far oil recovery can be improved by using water injection method, is determined by a laboratory research. Before carrying out water injection laboratory test; one has to know what the main points that play important role in determining the optimal oil recovery by water injection method. These are: firstly, reservoir data, secondly, formation water and sea water analysis, thirdly, determination of physical fluid and rock properties, next, the displacement of water injection process to obtain the additional oil recovery and standard operational procedure. The main focus of this paper is "Determination of Oil Recovery Factor By Using Water Injection-Laboratory Test Method ". Hopefully, the contents of this paper give extremely valuable and useful information not only for LEMIGAS as Research and Development Centre for Oil and Gas Technology, but also for the oil industry or the Department of Petroleum Engineering of the universities in Indonesia.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2022-03-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/1035</dc:identifier>
	<dc:identifier>10.29017/SCOG.28.1.1035</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 28 No. 1 (2005); 18-22</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 28 No 1 (2005); 18-22</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/1035/824</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 1970 SCIENTIFIC CONTRIBUTIONS OIL AND GAS (SCOG)</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>