Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Digital Core Analysis of Capillary Pressure in Sandstone

Scientific Contributions Oil and Gas · Vol. 45 No. 3 (2022) · hlm. 183–191

DOI
10.29017/SCOG.45.3.1260
ISSN
2541-0520, 2089-3361
Terbit
2022-12-01
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

This research aimed to obtain the petrophysical parameters of the capillary pressure of a sandstonefrom 3D modelling of high-resolution rock images. By integrating a number of 2D slice results, a plot of capillarypressure vs water saturation was built. When performing digital simulations using 512 x 512 x 512 pixels, theeffect on the resulting image was clearly seen using interactive thresholding. The obtained porosity was 29.5%while the permeability was obtained through iteration as 3942 mD, a quite large value since it is a synthetic core.Meanwhile, at the depth of free water level of 984 ft, the capillary pressure is found to be 167.36 psi with watersaturation at 4%.

Kata kunci

Jaringan kolaborasi para penulis

16 penulis · 33 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Pertamina
  • Bandung Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nining Sari NingsihBandung Institute of Technology1
Irsan Soemantri BrodjonegoroBandung Institute of Technology1
Anastasia Rita TisianaAfiliasi tidak diketahui1
Taufan MarhaendrajanaBandung Institute of Technology1
Farizal HakikiBandung Institute of Technology1
Syaloom Zefanya TampiUniversitas Pertamina1
Ajeng Purna Putri OktavianiUniversitas Pertamina1
M. KurniawanAfiliasi tidak diketahui1
Astra Agus PramanaUniversitas Pertamina1
Adhikara ParamayogaUniversitas Pertamina1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Digital Core Analysis of Capillary Pressure in Sandstone</dc:title>
	<dc:creator xml:lang="en">Oktaviany, Ajeng P.P.</dc:creator>
	<dc:creator xml:lang="en">DN, Astra Agus Pramana</dc:creator>
	<dc:creator xml:lang="en">Farahdibah, Utami</dc:creator>
	<dc:creator xml:lang="en">Maharsi, Dara A</dc:creator>
	<dc:creator xml:lang="en">Astuti, Wenny</dc:creator>
	<dc:creator xml:lang="en">Gibrata, Muhammad A</dc:creator>
	<dc:subject xml:lang="en">capillary pressure</dc:subject>
	<dc:subject xml:lang="en">sandstone</dc:subject>
	<dc:subject xml:lang="en">digital analysis</dc:subject>
	<dc:description xml:lang="en">This research aimed to obtain the petrophysical parameters of the capillary pressure of a sandstonefrom 3D modelling of high-resolution rock images. By integrating a number of 2D slice results, a plot of capillarypressure vs water saturation was built. When performing digital simulations using 512 x 512 x 512 pixels, theeffect on the resulting image was clearly seen using interactive thresholding. The obtained porosity was 29.5%while the permeability was obtained through iteration as 3942 mD, a quite large value since it is a synthetic core.Meanwhile, at the depth of free water level of 984 ft, the capillary pressure is found to be 167.36 psi with watersaturation at 4%.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2022-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/1260</dc:identifier>
	<dc:identifier>10.29017/SCOG.45.3.1260</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 45 No. 3 (2022); 183-191</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 45 No 3 (2022); 183-191</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/1260/1039</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2022 © Copyright by Authors. Published by LEMIGAS</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>