Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

The 3D Seismic Survey Design of South Walio Offshore, Indonesia: Optimizing the 3D Survey Design Parameters

Scientific Contributions Oil and Gas · Vol. 46 No. 2 (2023) · hlm. 25–36

DOI
10.29017/SCOG.46.2.1552
ISSN
2541-0520, 2089-3361
Terbit
2023-08-01
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

The background of this research is to support the plan to carry out 3D seismic acquisition in the Salawati Kepala Burung Working Area located in Sorong Regency. The 3D seismic design study was applied to better understand the physical properties of the Mesozoic clastic reservoir in the Salawati basin and its surroundings, especially in the offshore area. The study aims to evaluate the parameters of a reliable 3D seismic acquisition design to meet efficiency in financing in realizing the 3D seismic data acquisition program. Determine the recording parameters to image the Kais Formation and Waripi Formation targets by building a geophysical analysis model using existing 2D data and well-log information. Based on this model, using the Kais and Waripi formation properties to calculate and analyze vertical and horizontal resolution, bin size, aperture migration, and maximum offset. Synthetic acquisition 2D modeling is applied in this study to perform vertical and horizontal resolution analysis and obtain optimum and reliable bin size parameters and aperture migration. With this knowledge, we calculate the theoretical parameters of the survey. After determining the most critical theoretical parameters of the study, the next step is to determine the distance between the source and receiver. Then define the recording template. It is done by considering the bin size for the 3D model, offset boundaries, and suitable folds for inner targets. In the second, an analysis of the other two most important attributes is carried out, namely the offset and azimuth distribution. It is realized that every 3D survey design compromises technical factors affecting 3D survey costs starting from the technical requirements of field activities. The results of this study are recommendations and suggestions for two main alternative models of recording parameters and templates in the form of ideal source-receiver layout models, namely orthogonal and diagonal, and the minimum prerequisites that are expected to be able to map and determine the characteristics of the shallow and deep play type models in the South Walio offshore areas.

Kata kunci

Jaringan kolaborasi para penulis

34 penulis · 77 tautan kepenulisan bersama · 21 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Universitas Trisakti
  • Muhammadiyah University of Surakarta
  • State University of Semarang
  • Universitas Muhammadiyah Surabaya
  • Meteorological, Climatological, And Geophysical Agency
  • Halliburton (United States)
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Tiarma Talenta TheresiaUniversitas Trisakti2
Lucky Kriski MuhtarAfiliasi tidak diketahui2
Edycakra SinagaBandung Institute of Technology2
Tukidi .State University of Semarang1
Fredy HermantoState University of Semarang1
Aulia Muna MajidahMuhammadiyah University of Surakarta1
Husnul KhotimahMuhammadiyah University of Surakarta1
Tri Erri AstoetiUniversitas Trisakti1
Cindy Vania KristantoUniversitas Trisakti1
Angela WinsonUniversitas Trisakti1
Lia Hapsari AndayaniUniversitas Trisakti1
Abdul Gani SoulissaUniversitas Trisakti1
S. SupriyonoAfiliasi tidak diketahui1
Awali PriyonoBandung Institute of Technology1
Hilman MardiyanBandung Institute of Technology1
Abdul Aziz Alimul HidayatUniversitas Muhammadiyah Surabaya1
Ratna AgustinUniversitas Muhammadiyah Surabaya1
Fatkhan FatkhanBandung Institute of Technology1
Jefri B. IrawanBandung Institute of Technology1
Natasha C. VionyBandung Institute of Technology1
Sunawar KunaifiHalliburton (United States)1
Benyamin SapiieBandung Institute of Technology1
Hikhmadhan GultafBandung Institute of Technology1
Meli HadianaBandung Institute of Technology1
Yehezkiel HalauwetMeteorological, Climatological, And Geophysical Agency1
Herlina A A M NarwadanMeteorological, Climatological, And Geophysical Agency1
Fernando Lawrens HutapeaBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The 3D Seismic Survey Design of South Walio Offshore, Indonesia: Optimizing the 3D Survey Design Parameters</dc:title>
	<dc:creator xml:lang="en">Triyoso, Wahyu</dc:creator>
	<dc:creator xml:lang="en">Supriyono, Supriyono</dc:creator>
	<dc:creator xml:lang="en">Akbar, Firman Saifuddin</dc:creator>
	<dc:creator xml:lang="en">Oktariena, Madaniya</dc:creator>
	<dc:creator xml:lang="en">Lestari, Sri</dc:creator>
	<dc:creator xml:lang="en">Yusuf, Benny Eza</dc:creator>
	<dc:creator xml:lang="en">Miraza, Donny</dc:creator>
	<dc:subject xml:lang="en">3D Survey Design</dc:subject>
	<dc:subject xml:lang="en">Salawati Basin</dc:subject>
	<dc:subject xml:lang="en">Salawati Working Area</dc:subject>
	<dc:subject xml:lang="en">Kais Formation &amp; Waripi Formation</dc:subject>
	<dc:subject xml:lang="en">Parameter Recording &amp; Templates.</dc:subject>
	<dc:description xml:lang="en">The background of this research is to support the plan to carry out 3D seismic acquisition in the Salawati Kepala Burung Working Area located in Sorong Regency. The 3D seismic design study was applied to better understand the physical properties of the Mesozoic clastic reservoir in the Salawati basin and its surroundings, especially in the offshore area. The study aims to evaluate the parameters of a reliable 3D seismic acquisition design to meet efficiency in financing in realizing the 3D seismic data acquisition program. Determine the recording parameters to image the Kais Formation and Waripi Formation targets by building a geophysical analysis model using existing 2D data and well-log information. Based on this model, using the Kais and Waripi formation properties to calculate and analyze vertical and horizontal resolution, bin size, aperture migration, and maximum offset. Synthetic acquisition 2D modeling is applied in this study to perform vertical and horizontal resolution analysis and obtain optimum and reliable bin size parameters and aperture migration. With this knowledge, we calculate the theoretical parameters of the survey. After determining the most critical theoretical parameters of the study, the next step is to determine the distance between the source and receiver. Then define the recording template. It is done by considering the bin size for the 3D model, offset boundaries, and suitable folds for inner targets. In the second, an analysis of the other two most important attributes is carried out, namely the offset and azimuth distribution. It is realized that every 3D survey design compromises technical factors affecting 3D survey costs starting from the technical requirements of field activities. The results of this study are recommendations and suggestions for two main alternative models of recording parameters and templates in the form of ideal source-receiver layout models, namely orthogonal and diagonal, and the minimum prerequisites that are expected to be able to map and determine the characteristics of the shallow and deep play type models in the South Walio offshore areas.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2023-08-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/1552</dc:identifier>
	<dc:identifier>10.29017/SCOG.46.2.1552</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 46 No. 2 (2023); 25-36</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 46 No 2 (2023); 25-36</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/1552/pdf</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 © Copyright by Authors. Published by LEMIGAS</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>