Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Utilization of Jenitri as A Bioadsorbent in Petroleum Field-Produced Water

Scientific Contributions Oil and Gas · Vol. 48 No. 1 (2025) · hlm. 217–231

DOI
10.29017/scog.v48i1.1734
ISSN
2541-0520, 2089-3361
Terbit
2025-04-25
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

As oil and gas fields mature, the volume of produced water can increase substantially, often exceeding 90% of total production. This water cannot be directly discharged or reused due to harmful contaminants that pose considerable environmental risks. One major challenge is the absence of efficient, eco-friendly, and cost-effective filtration media for its treatment. This study aimed to develop and assess an alternative adsorbent derived from jenitri seeds, chemically activated with potassium hydroxide (KOH) at controlled temperatures. The primary goal was to identify a more effective and sustainable adsorbent than those currently used in oilfield operations. The methodology involved the preparation of this adsorbent, Its physicochemical characterization included bulk density measurement, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) analyses, along with performance testing through filtration, benchmarked against natural adsorbents such as candlenut and walnut. The KOH-activated jenitri demonstrated superior pollutant removal performance, primarily due to enhanced porosity and surface area resulting from the activation process. It exhibited the lowest bulk density (0.6 g/mL), an optimal porous structure as revealed by SEM, and the presence of active functional groups such as –OH, C=O, and C–O, identified through FTIR analysis. In filtration tests, KOH-activated jenitri effectively reduced total dissolved solids (TDS) to 600 mg/L and turbidity to 100–200 nephelometric turbidity units (NTU), outperforming natural jenitri, candlenut, and walnut, whose limited porosity contributed to lower adsorption efficiency

Kata kunci

Jaringan kolaborasi para penulis

24 penulis · 73 tautan kepenulisan bersama · 35 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Islamic University of Riau
  • Bandung Institute of Technology
  • Riau University
  • Universiti Teknologi MARA
  • Universiti Malaysia Perlis
  • Sebelas Maret University
  • Universitas Halu Oleo
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Muhammad Khairul AfdholIslamic University of Riau7
Fiki HidayatIslamic University of Riau7
MursyidahIslamic University of Riau3
Ari PrasetyoIslamic University of Riau3
Rizqy KhariszmaIslamic University of Riau1
Intan PermatasariSebelas Maret University1
Hardiyanto HardiyantoUniversitas Halu Oleo1
Muhammad Yogi SatriaAfiliasi tidak diketahui1
Tengku Mohammad Sofyan AstsauriAfiliasi tidak diketahui1
Bayu Dedi PrasetiyoAfiliasi tidak diketahui1
Gerry SiregarAfiliasi tidak diketahui1
Muslim Darbi AbdurrahmanIslamic University of Riau1
Romal RamadhanChulalongkorn University1
Adi NovriansyahIslamic University of Riau1
Suparit TangparitkulChiang Mai University1
Arik DaniatiBandung Institute of Technology1
Asep Kurnia PermadiBandung Institute of Technology1
Dita Putri PurnamaIslamic University of Riau1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Utilization of Jenitri as A Bioadsorbent in Petroleum Field-Produced Water</dc:title>
	<dc:creator xml:lang="en">Afdho, Muhammad Khairul </dc:creator>
	<dc:creator xml:lang="en">Saputri, Rika Lala</dc:creator>
	<dc:creator xml:lang="en">Juneid, Adiella Zakky</dc:creator>
	<dc:creator xml:lang="en">Nordin, Razif Muhammed</dc:creator>
	<dc:creator xml:lang="en">Bin Zakaria, Muhammad Salihin</dc:creator>
	<dc:creator xml:lang="en">Erfando, Tomi</dc:creator>
	<dc:subject xml:lang="en">adsorbent</dc:subject>
	<dc:subject xml:lang="en">potassium hydroxide</dc:subject>
	<dc:subject xml:lang="en">jenitri, filtration</dc:subject>
	<dc:subject xml:lang="en">produced water</dc:subject>
	<dc:description xml:lang="en">As oil and gas fields mature, the volume of produced water can increase substantially, often exceeding 90% of total production. This water cannot be directly discharged or reused due to harmful contaminants that pose considerable environmental risks. One major challenge is the absence of efficient, eco-friendly, and cost-effective filtration media for its treatment. This study aimed to develop and assess an alternative adsorbent derived from jenitri seeds, chemically activated with potassium hydroxide (KOH) at controlled temperatures. The primary goal was to identify a more effective and sustainable adsorbent than those currently used in oilfield operations. The methodology involved the preparation of this adsorbent, Its physicochemical characterization included bulk density measurement, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) analyses, along with performance testing through filtration, benchmarked against natural adsorbents such as candlenut and walnut. The KOH-activated jenitri demonstrated superior pollutant removal performance, primarily due to enhanced porosity and surface area resulting from the activation process. It exhibited the lowest bulk density (0.6 g/mL), an optimal porous structure as revealed by SEM, and the presence of active functional groups such as –OH, C=O, and C–O, identified through FTIR analysis. In filtration tests, KOH-activated jenitri effectively reduced total dissolved solids (TDS) to 600 mg/L and turbidity to 100–200 nephelometric turbidity units (NTU), outperforming natural jenitri, candlenut, and walnut, whose limited porosity contributed to lower adsorption efficiency</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2025-04-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/1734</dc:identifier>
	<dc:identifier>10.29017/scog.v48i1.1734</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 48 No. 1 (2025); 217-231</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 48 No 1 (2025); 217-231</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/1734/1348</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 © Copyright by Authors. Published by LEMIGAS</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>