Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Caprock Integrity Assessment from Core-Based Formation Analysis and Laboratory Workflow: A Case Study of The Asri Basin Caprock

Scientific Contributions Oil and Gas · Vol. 49 No. 1 (2026) · hlm. 359–373

DOI
10.29017/scog.v49i1.2021
ISSN
2541-0520, 2089-3361
Terbit
2026-03-10
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Caprock integrity is a critical factor in ensuring the long-term safety of CO₂ geological storage, enhanced oil recovery (EOR), and wellbore stability. This study investigates the sealing performance of shale- and carbonate-rich caprock intervals from the Asri Basin, with specific focus on the Baturaja and Gita Formations. This study introduces a CT-guided integrated laboratory workflow for caprock integrity assessment, which simultaneously links petrophysical sealing capacity, mineralogical controls, and geomechanical strength within a unified experimental framework, a workflow rarely applied in Southeast Asian basins. Whole-core sections from Well ASR-1 were screened using computed tomography (CT) imaging to identify fractures and heterogeneity prior to plug extraction. Laboratory methods included porosity and permeability determination under variable confining stresses, mercury injection capillary pressure (MICP) analysis to evaluate sealing capacity, mineralogical characterization by X-ray diffraction (XRD), scanning electron microscopy (SEM–EDS), petrography, and mechanical testing (UCS, triaxial, and Brazilian tensile tests). The results demonstrate significant depth-dependent variability: The Baturaja Formation exhibited heterogeneous sealing capacity, with entry pressures ranging from 217 to 1,197 psi, while the Gita Formation consistently displayed strong sealing, with maximum Pc_entry of 2,844 psi and pore systems dominated by <0.1 µm throats. Mechanical tests confirmed adequate strength and the preservation of low permeability under confining stress, with clay content and carbonate cementation identified as primary controls on integrity. The integrated workflow enables a process-based interpretation of lithology-controlled sealing mechanisms, improving the robustness of site selection and risk assessment for CO₂ storage in the Asri Basin and similar carbonate and mudstone systems.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 150 tautan kepenulisan bersama · 42 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Pembangunan Nasional Veteran Yogyakarta
  • Bandung Institute of Technology
  • Pertamina (Indonesia)
  • Yogyakarta State University
  • University of Malaya
  • Universitas Darma Persada
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Luky Agung YusgiantoroUniversitas Pembangunan Nasional Veteran Yogyakarta4
Indah WidiyaningsihUniversitas Pembangunan Nasional Veteran Yogyakarta4
Ndaru CahyaningtyasUniversitas Pembangunan Nasional Veteran Yogyakarta4
HariyadiUniversitas Pembangunan Nasional Veteran Yogyakarta3
Karina LarasatiUniversitas Pembangunan Nasional Veteran Yogyakarta3
Dewi AsmorowatiBandung Institute of Technology2
Taufan MarhaendrajanaBandung Institute of Technology2
Hariyadi HariyadiUniversitas Pembangunan Nasional Veteran Yogyakarta2
Muhammad Rizky Rahmadsyah LubisPertamina (Indonesia)2
Mahruri SanmurjanaAfiliasi tidak diketahui2
Rahajeng Suryo RahmadhiniUniversitas Pembangunan Nasional Veteran Yogyakarta2
Mohammad NurcholisUniversitas Pembangunan Nasional Veteran Yogyakarta1
Agus Maman AbadiYogyakarta State University1
Lusi HariniYogyakarta State University1
Akhid Khirohmah MansyarohYogyakarta State University1
Aditya Wisnugraha SugiyartoBandung Institute of Technology1
Leksono MucharamBandung Institute of Technology1
Hasian P. Septoratno SiregarBandung Institute of Technology1
Sayoga Heru PrayitnoUniversitas Pembangunan Nasional Veteran Yogyakarta1
Damar Nandi WardhanaUniversitas Pembangunan Nasional Veteran Yogyakarta1
Herlina JayadiantiUniversitas Pembangunan Nasional Veteran Yogyakarta1
Geovanny Branchiny ImasulyUniversitas Pembangunan Nasional Veteran Yogyakarta1
Eko Widi PramudyohadiAfiliasi tidak diketahui1
Aditya Fahrizal KurniawanUniversitas Pembangunan Nasional Veteran Yogyakarta1
Unggul Setiadi NursidikUniversitas Pembangunan Nasional Veteran Yogyakarta1
Tri Bagus PrabowoUniversitas Darma Persada1
Tutuka AriadjiBandung Institute of Technology1
Ardhi Hakim Lumban GaolBandung Institute of Technology1
Miftah HidayatBandung Institute of Technology1
Windyanesha ParadhitaUniversitas Pembangunan Nasional Veteran Yogyakarta1
Nur SuhascaryoUniversitas Pembangunan Nasional Veteran Yogyakarta1
Defi RustamiPertamina (Indonesia)1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Caprock Integrity Assessment from Core-Based Formation Analysis and Laboratory Workflow: A Case Study of The Asri Basin Caprock</dc:title>
	<dc:creator xml:lang="en">Buntoro, Aris</dc:creator>
	<dc:creator xml:lang="en">Putra, Teddy Eka</dc:creator>
	<dc:creator xml:lang="en">Kristanto, Dedi</dc:creator>
	<dc:creator xml:lang="en">Swadesi, Boni</dc:creator>
	<dc:creator xml:lang="en">Amir, Zulhemi</dc:creator>
	<dc:creator xml:lang="en">Lukmana, Allen Haryanto</dc:creator>
	<dc:creator xml:lang="en">Wicaksono, Dimas Suryo</dc:creator>
	<dc:creator xml:lang="en">Nurcholis, Muhammad</dc:creator>
	<dc:subject xml:lang="en">caprock integrity</dc:subject>
	<dc:subject xml:lang="en">core analysis</dc:subject>
	<dc:subject xml:lang="en">formation stratigraphy</dc:subject>
	<dc:subject xml:lang="en">petrophysics</dc:subject>
	<dc:subject xml:lang="en">rock mechanics</dc:subject>
	<dc:description xml:lang="en">Caprock integrity is a critical factor in ensuring the long-term safety of CO₂ geological storage, enhanced oil recovery (EOR), and wellbore stability. This study investigates the sealing performance of shale- and carbonate-rich caprock intervals from the Asri Basin, with specific focus on the Baturaja and Gita Formations. This study introduces a CT-guided integrated laboratory workflow for caprock integrity assessment, which simultaneously links petrophysical sealing capacity, mineralogical controls, and geomechanical strength within a unified experimental framework, a workflow rarely applied in Southeast Asian basins. Whole-core sections from Well ASR-1 were screened using computed tomography (CT) imaging to identify fractures and heterogeneity prior to plug extraction. Laboratory methods included porosity and permeability determination under variable confining stresses, mercury injection capillary pressure (MICP) analysis to evaluate sealing capacity, mineralogical characterization by X-ray diffraction (XRD), scanning electron microscopy (SEM–EDS), petrography, and mechanical testing (UCS, triaxial, and Brazilian tensile tests). The results demonstrate significant depth-dependent variability: The Baturaja Formation exhibited heterogeneous sealing capacity, with entry pressures ranging from 217 to 1,197 psi, while the Gita Formation consistently displayed strong sealing, with maximum Pc_entry of 2,844 psi and pore systems dominated by &amp;lt;0.1 µm throats. Mechanical tests confirmed adequate strength and the preservation of low permeability under confining stress, with clay content and carbonate cementation identified as primary controls on integrity. The integrated workflow enables a process-based interpretation of lithology-controlled sealing mechanisms, improving the robustness of site selection and risk assessment for CO₂ storage in the Asri Basin and similar carbonate and mudstone systems.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2026-03-10</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/2021</dc:identifier>
	<dc:identifier>10.29017/scog.v49i1.2021</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 49 No. 1 (2026); 359-373</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 49 No 1 (2026); 359-373</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/2021/1661</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 © Copyright by Authors. Published by LEMIGAS</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>