Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Multi-objective Optimization of Risk-Based Inspection Planning for Oil and Gas Piping Systems Using NSGA-II Algorithm

Scientific Contributions Oil and Gas · Vol. 49 No. 2 (2026) · hlm. 393–408

DOI
10.29017/scog.v49i2.2084
ISSN
2541-0520, 2089-3361
Terbit
2026-06-26
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The systematic examination of piping is essential for the successful implementation of risk-based inspection. The ineffective execution of this activity increases the risk of equipment failure and unnecessary costs. Therefore, this study aims to address the challenge of optimizing inspection planning for oil and gas piping systems within budgetary and operational constraints. The most effective inspection methods are selected to determine the optimal inspection interval. A multi-objective optimization model based on the non-dominated sorting genetic algorithm-II is applied to simultaneously minimize the probability of failure and optimize total inspection costs. The adopted methodology, which differs from traditional methods, eliminates reliance on predefined risk thresholds and explicit failure-consequence evaluations by directly incorporating inspection costs. Additionally, the best-performing model achieves an efficient solution by reducing the total probability of failure from 1.631 10-1 to 0.8975 10-1. The application model further provides a robust decision-support tool for efficient inspection planning, increases inspection effectiveness, and reduces the risk of failure. These developments form the basis for effective decision-making to support the implementation of asset integrity management through efficient inspection planning.

Kata kunci

Jaringan kolaborasi para penulis

21 penulis · 56 tautan kepenulisan bersama · 24 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Sepuluh Nopember
  • Bandung Institute of Technology
  • Khalifa University of Science and Technology
  • Norwegian University of Science and Technology
  • University of Oxford
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Moch. Taufik HakikiInstitut Teknologi Sepuluh Nopember1
Aimmatul Ummah AlfajriyahInstitut Teknologi Sepuluh Nopember1
Daryono Budi UtomoInstitut Teknologi Sepuluh Nopember1
H. KurniawanInstitut Teknologi Sepuluh Nopember1
Nuning NurainiBandung Institute of Technology1
Hadi SusantoKhalifa University of Science and Technology1
Rudy KusdiantaraBandung Institute of Technology1
Venansius Ryan TjahjonoInstitut Teknologi Sepuluh Nopember1
Agus HasanNorwegian University of Science and Technology1
Muhammad KasimUniversity of Oxford1
Wikan JatimurtiInstitut Teknologi Sepuluh Nopember1
Azzahwa Fariha PadmavatiInstitut Teknologi Sepuluh Nopember1
SulistijonoInstitut Teknologi Sepuluh Nopember1
Alvian Toto WibisonoInstitut Teknologi Sepuluh Nopember1
Mu’adz Abdullah FaqihInstitut Teknologi Sepuluh Nopember1
Amaliya RasyidaInstitut Teknologi Sepuluh Nopember1
Diah SusantiInstitut Teknologi Sepuluh Nopember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Multi-objective Optimization of Risk-Based Inspection Planning for Oil and Gas Piping Systems Using NSGA-II Algorithm</dc:title>
	<dc:creator xml:lang="en">Wahono, Tri</dc:creator>
	<dc:creator xml:lang="en">Putri, Endah R.M.</dc:creator>
	<dc:creator xml:lang="en">Mukhlash, Imam</dc:creator>
	<dc:creator xml:lang="en">Purniawan, Agung</dc:creator>
	<dc:subject xml:lang="en">inspection planning</dc:subject>
	<dc:subject xml:lang="en">multi-objective optimization</dc:subject>
	<dc:subject xml:lang="en">oil and gas</dc:subject>
	<dc:subject xml:lang="en">piping</dc:subject>
	<dc:subject xml:lang="en">risk-based inspection</dc:subject>
	<dc:description xml:lang="en">The systematic examination of piping is essential for the successful implementation of risk-based inspection. The ineffective execution of this activity increases the risk of equipment failure and unnecessary costs. Therefore, this study aims to address the challenge of optimizing inspection planning for oil and gas piping systems within budgetary and operational constraints. The most effective inspection methods are selected to determine the optimal inspection interval. A multi-objective optimization model based on the non-dominated sorting genetic algorithm-II is applied to simultaneously minimize the probability of failure and optimize total inspection costs. The adopted methodology, which differs from traditional methods, eliminates reliance on predefined risk thresholds and explicit failure-consequence evaluations by directly incorporating inspection costs. Additionally, the best-performing model achieves an efficient solution by reducing the total probability of failure from 1.631 10-1 to 0.8975 10-1. The application model further provides a robust decision-support tool for efficient inspection planning, increases inspection effectiveness, and reduces the risk of failure. These developments form the basis for effective decision-making to support the implementation of asset integrity management through efficient inspection planning.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2026-06-26</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/2084</dc:identifier>
	<dc:identifier>10.29017/scog.v49i2.2084</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 49 No. 2 (2026); 393-408</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 49 No 2 (2026); 393-408</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/2084/1713</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Copyright by Authors. Published by LEMIGAS</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>