Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Bottom Hole Assembly Performance Evaluation for Horizontal Well Drilling: Case Study of Well “AM-63” in Penang Field, Indonesia

Scientific Contributions Oil and Gas · Vol. 49 No. 3 (2026) · hlm. 441–460

DOI
10.29017/scog.v49i3.2142
ISSN
2541-0520, 2089-3361
Terbit
2026-09-25
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Horizontal well drilling is highly complex, particularly in the landing section, due to the increased inclination angle, which can increase torque and drag. These conditions reduce the effectiveness of Weight-on-Bit (WOB) transfer, lower the Rate of Penetration (ROP), extend drilling time, and increase the risk of hanging problems, which could lead to a stuck-pipe case. This study aims to evaluate the performance of the Bottom Hole Assembly (BHA) design in Well AM-63 and to formulate recommendations for a more effective BHA design for future wells. The study employs a quantitative, evaluative case study approach. The data analysed include the wellbore trajectory, BHA configuration, drilling parameters, torque and drag, ROP, and drilling time in the 12%" section (2,310-4,195 ftMD). The analysis results show that a relatively heavy BHA configuration increases the contact force between the drill string and the wellbore wall near the landing section (4.004-4.195 ft MD), resulting in increased torque and drag, decreased ROP, and increased drilling time. The actual drilling time for the 124" section was 160 hours, which was longer than the planned 65 hours, resulting in an additional 95 hours. This study provides a quantitative evaluation, based on field data, of the performance of the Bottom Hole Assembly (BHA) at the Penang Field by demonstrating the relationship between BHA configuration, wellbore trajectory, and increases in torque and drag due to friction. The findings of this study serve as a practical reference for optimizing BHA design while highlighting the trade-off between successful drilling direction control and efforts to minimize friction in horizontal well drilling operations. Based on the evaluation results, it is recommended to use a lighter BHA configuration to reduce torque and drag, improve WOB transfer efficiency, and minimize the risk of hanging while drilling subsequent horizontal wells. The results provide practical guidance for improving drilling efficiency and for optimizing BHAs in future horizontal well developments under similar field conditions.

Kata kunci

Jaringan kolaborasi para penulis

15 penulis · 38 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Pembangunan Nasional Veteran Yogyakarta
  • Bandung Institute of Technology
  • Satya Wacana Christian University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Indah WidiyaningsihUniversitas Pembangunan Nasional Veteran Yogyakarta3
Taufan MarhaendrajanaBandung Institute of Technology2
Ivan KurniaBandung Institute of Technology2
Suryasatriya TrihandaruSatya Wacana Christian University1
Ivanky SaputraAfiliasi tidak diketahui1
Septoratno SiregarBandung Institute of Technology1
Leksono MucharamBandung Institute of Technology1
Sinatra CanggihBandung Institute of Technology1
Tutuka AriadjiBandung Institute of Technology1
Sayoga Heru PrayitnoUniversitas Pembangunan Nasional Veteran Yogyakarta1
Yulius Deddy HermawanUniversitas Pembangunan Nasional Veteran Yogyakarta1
Joko PamungkasUniversitas Pembangunan Nasional Veteran Yogyakarta1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Bottom Hole Assembly Performance Evaluation for Horizontal Well Drilling: Case Study of Well “AM-63” in Penang Field, Indonesia</dc:title>
	<dc:creator xml:lang="en">Herianto</dc:creator>
	<dc:creator xml:lang="en">Budiharjo S, Harry</dc:creator>
	<dc:creator xml:lang="en">Alip Meindar</dc:creator>
	<dc:subject xml:lang="en">stuck pipe prevention</dc:subject>
	<dc:subject xml:lang="en">torque and drag</dc:subject>
	<dc:subject xml:lang="en">bottom hole assembly</dc:subject>
	<dc:subject xml:lang="en">horizontal well</dc:subject>
	<dc:subject xml:lang="en">optimum rate of penetration</dc:subject>
	<dc:description xml:lang="en">Horizontal well drilling is highly complex, particularly in the landing section, due to the increased inclination angle, which can increase torque and drag. These conditions reduce the effectiveness of Weight-on-Bit (WOB) transfer, lower the Rate of Penetration (ROP), extend drilling time, and increase the risk of hanging problems, which could lead to a stuck-pipe case. This study aims to evaluate the performance of the Bottom Hole Assembly (BHA) design in Well AM-63 and to formulate recommendations for a more effective BHA design for future wells. The study employs a quantitative, evaluative case study approach. The data analysed include the wellbore trajectory, BHA configuration, drilling parameters, torque and drag, ROP, and drilling time in the 12%" section (2,310-4,195 ftMD). The analysis results show that a relatively heavy BHA configuration increases the contact force between the drill string and the wellbore wall near the landing section (4.004-4.195 ft MD), resulting in increased torque and drag, decreased ROP, and increased drilling time. The actual drilling time for the 124" section was 160 hours, which was longer than the planned 65 hours, resulting in an additional 95 hours. This study provides a quantitative evaluation, based on field data, of the performance of the Bottom Hole Assembly (BHA) at the Penang Field by demonstrating the relationship between BHA configuration, wellbore trajectory, and increases in torque and drag due to friction. The findings of this study serve as a practical reference for optimizing BHA design while highlighting the trade-off between successful drilling direction control and efforts to minimize friction in horizontal well drilling operations. Based on the evaluation results, it is recommended to use a lighter BHA configuration to reduce torque and drag, improve WOB transfer efficiency, and minimize the risk of hanging while drilling subsequent horizontal wells. The results provide practical guidance for improving drilling efficiency and for optimizing BHAs in future horizontal well developments under similar field conditions.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2026-09-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/2142</dc:identifier>
	<dc:identifier>10.29017/scog.v49i3.2142</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 49 No. 3 (2026); 441-460</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 49 No 3 (2026); 441-460</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/2142/1770</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Copyright by Authors. Published by LEMIGAS</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>