Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

SEM-XRD Aging Study of Pre-Stressed 2024-T3 Alloys for Oil and Gas Supporting Components

Scientific Contributions Oil and Gas · Vol. 49 No. 3 (2026) · hlm. 593–606

DOI
10.29017/scog.v49i3.2146
ISSN
2541-0520, 2089-3361
Terbit
2026-09-24
Penerbit
Testing Center for Oil and Gas LEMIGAS
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

AA2024-T3 aluminum alloy has a high strength-to-weight ratio and the potential for use in oil and gas support components that are not wetted and do not experience pressure, such as lightweight brackets, instrument guards, inspection equipment housings, and auxiliary structures of operational vehicles. This study evaluated the effects of 0%, 2%, 4%, and 6% pre-strain and artificial aging at 175 and 190 °C on material integrity using scanning electron microscopy (SEM), X-ray diffraction (XRD), Vickers hardness testing, tensile testing, and fractography. The aging duration is 8 hours. The P4-A175 condition yielded a hardness of 158 HV, a yield strength of 366 MPa, a maximum tensile strength of 505 MPa, and an elongation of 12.4%, so it was chosen as the best strengthening condition among aging conditions that still retain an elongation of at least 12% and a ductile fracture morphology. In contrast, P6-A190 produces a tensile strength of 437 MPa and an elongation of 7.8%, accompanied by shallow dimples and secondary cracking. These findings suggest that increased violence is not always synonymous with increased integrity. The implications of the study are limited to non-wet, non-pressure-retaining supporting components because exposure to CO₂, H₂S, brine, cyclic loads, and oil-and-gas service conditions has not been simulated.

Kata kunci

Jaringan kolaborasi para penulis

11 penulis · 22 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Sepuluh Nopember
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Endah R.M. PutriInstitut Teknologi Sepuluh Nopember1
Tri WahonoInstitut Teknologi Sepuluh Nopember1
Imam MukhlashInstitut Teknologi Sepuluh Nopember1
Mu’adz Abdullah FaqihInstitut Teknologi Sepuluh Nopember1
Amaliya RasyidaInstitut Teknologi Sepuluh Nopember1
Diah SusantiInstitut Teknologi Sepuluh Nopember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.lemigas.esdm.go.id/index.php/SCOG/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">SEM-XRD Aging Study of Pre-Stressed 2024-T3 Alloys for Oil and Gas Supporting Components</dc:title>
	<dc:creator xml:lang="en">Jatimurti, Wikan</dc:creator>
	<dc:creator xml:lang="en">Padmavati, Azzahwa Fariha </dc:creator>
	<dc:creator xml:lang="en">Sulistijono</dc:creator>
	<dc:creator xml:lang="en">Wibisono, Alvian Toto </dc:creator>
	<dc:creator xml:lang="en">Purniawan, Agung </dc:creator>
	<dc:subject xml:lang="en">artificial aging</dc:subject>
	<dc:subject xml:lang="en">pre-tension</dc:subject>
	<dc:subject xml:lang="en">SEM-XRD</dc:subject>
	<dc:subject xml:lang="en">alloy 2024-T3</dc:subject>
	<dc:subject xml:lang="en">oil and gas components</dc:subject>
	<dc:description xml:lang="en">AA2024-T3 aluminum alloy has a high strength-to-weight ratio and the potential for use in oil and gas support components that are not wetted and do not experience pressure, such as lightweight brackets, instrument guards, inspection equipment housings, and auxiliary structures of operational vehicles. This study evaluated the effects of 0%, 2%, 4%, and 6% pre-strain and artificial aging at 175 and 190 °C on material integrity using scanning electron microscopy (SEM), X-ray diffraction (XRD), Vickers hardness testing, tensile testing, and fractography. The aging duration is 8 hours. The P4-A175 condition yielded a hardness of 158 HV, a yield strength of 366 MPa, a maximum tensile strength of 505 MPa, and an elongation of 12.4%, so it was chosen as the best strengthening condition among aging conditions that still retain an elongation of at least 12% and a ductile fracture morphology. In contrast, P6-A190 produces a tensile strength of 437 MPa and an elongation of 7.8%, accompanied by shallow dimples and secondary cracking. These findings suggest that increased violence is not always synonymous with increased integrity. The implications of the study are limited to non-wet, non-pressure-retaining supporting components because exposure to CO₂, H₂S, brine, cyclic loads, and oil-and-gas service conditions has not been simulated.</dc:description>
	<dc:publisher xml:lang="en">Testing Center for Oil and Gas LEMIGAS</dc:publisher>
	<dc:date>2026-09-24</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/2146</dc:identifier>
	<dc:identifier>10.29017/scog.v49i3.2146</dc:identifier>
	<dc:source xml:lang="en">Scientific Contributions Oil and Gas; Vol. 49 No. 3 (2026); 593-606</dc:source>
	<dc:source xml:lang="id">Scientific Contributions Oil and Gas; Vol 49 No 3 (2026); 593-606</dc:source>
	<dc:source>2541-0520</dc:source>
	<dc:source>2089-3361</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.lemigas.esdm.go.id/index.php/SCOG/article/view/2146/1777</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Copyright by Authors. Published by LEMIGAS</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>