Melola Discovery

← Melola Discovery

Jurnal SINTA 1

COATING THICKNESS ANALYSIS OF DEPOSITED FeCrAl SUBSTRATE BY γ-AL2O3 THROUGH NiO-ELECTROPLATING

Sinergi · Vol. 22 No. 3 (2018) · hlm. 177–184

DOI
10.22441/sinergi.2018.3.006
ISSN
2460-1217, 1410-2331
Terbit
2018-10-29
Penerbit
Universitas Mercu Buana
Bahasa
eng

Abstrak

Nickel Oxide (NiO) have widely applied in industrial and automotive to forming oxide layer on the substrate due to it have high thermal stability and corrosion resistant. However, NiO was not directly diffused to the substrate via co-precipitation, spray-pyrolysis and sol-gel methods. Therefore, NiO-electroplating was performed in coating FeCrAl substrate by γ-Al2O3 powder. This method was conducted using various time of 15, 30, 45, 60 and 75 minutes, a current of DC power supply is 1.28A and sulphamate type solution. From the data shows that smallest surface roughness (Ra) of NiO-electroplating (EL) samples located at EL 30 min sample for 0.69 µm. Ra of raw material was lower than coated samples due to it performed by coating activity on the substrate. It supported by coating thickness analysis that treated samples has a higher coating thickness up to 11.3 µm. EDS analysis observed some elements on coated and uncoated samples such as Carbon (C) of 4.62-20.67%, Oxygen (O) of 6.16-19.62%, Nickel (Ni) of 6.76-25.14%, Iron (Fe) of 23.96-48.53%, Sodium (Na) of 2.21-9.95%, Chromium (Cr) of 7.97-15.59% and Aluminum (Al) of 2.17-3.12%. Those elements promote to develop a protective oxide layer on FeCrAl at a high temperature of 1000 0C.

Kata kunci

Jaringan kolaborasi para penulis

36 penulis · 126 tautan kepenulisan bersama · 63 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Mercu Buana University
  • Beijing Institute of Technology
  • National University of Malaysia
  • Tun Hussein Onn University of Malaysia
  • Ungku Omar Polytechnic
  • Politeknik Enjinering Indorama
  • National Research and Innovation Agency
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dedik RomahadiMercu Buana University10
Supaat ZakariaUngku Omar Polytechnic8
Muhamad FitriMercu Buana University4
Andi AdriansyahMercu Buana University4
Abdi WahabMercu Buana University4
Aberham Genetu FelekeBeijing Institute of Technology3
Nur IndahNational University of Malaysia2
Rachmat MuwardiMercu Buana University2
Imam HidayatMercu Buana University2
Abdul Mutalib LemanTun Hussein Onn University of Malaysia2
Fajar AnggaraMercu Buana University2
Imam HidayatMercu Buana University2
S.S. AbdulmalikAfiliasi tidak diketahui2
Istiqomah IstiqomahState University of Semarang2
Mohamad Ardy FirmansyahMercu Buana University2
Himma FirdausNational Research and Innovation Agency2
Alfian NoviyantoMercu Buana University2
Hadi PranotoMercu Buana University2
Samir Sani AbdulmalikNigerian Army University Biu2
Muhammad ImranBeijing Institute of Technology1
Ahmad FudholiNational University of Malaysia1
Muhammad ZohriNational University of Malaysia1
Kushardiyanto KushardiyantoMercu Buana University1
Shahruddin MahzanTun Hussein Onn University of Malaysia1
Bagus Adi SaputraMercu Buana University1
Fathoni Putra WijayaAfiliasi tidak diketahui1
Dong WangBeijing Institute of Technology1
Agung Wahyudi BiantoroMercu Buana University1
Tri Wahyu AdinartoMercu Buana University1
Fatkur RachmanuPoliteknik Enjinering Indorama1
Wiwit SuprihatiningsihMercu Buana University1
Rikko Putra YouliaMercu Buana University1
Rizky RahmatullahBeijing Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">COATING THICKNESS ANALYSIS OF DEPOSITED FeCrAl SUBSTRATE BY γ-AL2O3 THROUGH  NiO-ELECTROPLATING</dc:title>
	<dc:creator>Pranoto, Hadi</dc:creator>
	<dc:creator>Nurato, Nurato</dc:creator>
	<dc:creator>Feriyanto, Dafit</dc:creator>
	<dc:subject xml:lang="en-US">Electroplating</dc:subject>
	<dc:subject xml:lang="en-US">Coating thickness</dc:subject>
	<dc:subject xml:lang="en-US">NiO</dc:subject>
	<dc:subject xml:lang="en-US">FeCrAl</dc:subject>
	<dc:description xml:lang="en-US">Nickel Oxide (NiO) have widely applied in industrial and automotive to forming oxide layer on the substrate due to it have high thermal stability and corrosion resistant. However, NiO was not directly diffused to the substrate via co-precipitation, spray-pyrolysis and sol-gel methods. Therefore, NiO-electroplating was performed in coating FeCrAl substrate by γ-Al2O3 powder. This method was conducted using various time of 15, 30, 45, 60 and 75 minutes, a current of DC power supply is 1.28A and sulphamate type solution. From the data shows that smallest surface roughness (Ra) of NiO-electroplating (EL) samples located at EL 30 min sample for 0.69 µm. Ra of raw material was lower than coated samples due to it performed by coating activity on the substrate. It supported by coating thickness analysis that treated samples has a higher coating thickness up to 11.3 µm. EDS analysis observed some elements on coated and uncoated samples such as Carbon (C) of 4.62-20.67%, Oxygen (O) of 6.16-19.62%, Nickel (Ni) of 6.76-25.14%, Iron (Fe) of 23.96-48.53%, Sodium (Na) of 2.21-9.95%, Chromium (Cr) of 7.97-15.59% and Aluminum (Al) of 2.17-3.12%. Those elements promote to develop a protective oxide layer on FeCrAl at a high temperature of 1000 0C. </dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2018-10-29</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/2771</dc:identifier>
	<dc:identifier>10.22441/sinergi.2018.3.006</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 22 No. 3 (2018); 177-184</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/2771/2119</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 SINERGI</dc:rights>
</oai_dc:dc>