Melola Discovery

← Melola Discovery

Jurnal SINTA 1

IMPLEMENTATION OF FREQUENCY RESPONSE FUNCTION ON TAPPER BEARING MAINTENANCE

Sinergi · Vol. 23 No. 2 (2019) · hlm. 132–138

DOI
10.22441/sinergi.2019.2.006
ISSN
2460-1217, 1410-2331
Terbit
2019-07-12
Penerbit
Universitas Mercu Buana
Bahasa
eng

Abstrak

Bearing acts as a pad that supports a shaft to rotate without excessive friction, hold the radial load and maintain the motion towards the left and right shafts (Thrust Load) when turning together. Due to frequent taper bearing damage to the wheels, predictive maintenance is therefore necessary. One of the predictive maintenance methods widely used today is vibration analysis. The principles of vibration-based bearing damage detection using the Frequency Response Function (FRF) method will be shown in this paper. Harmonics signal is given to the bearing surface in a vertical or perpendicular direction to the taper bearing surface. The vibration response measurement was carried out on three axes (x, y, and z). The results of this study indicated the ability of FRFs to predict any damage on the bearing taper.

Kata kunci

Jaringan kolaborasi para penulis

21 penulis · 48 tautan kepenulisan bersama · 8 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Mercu Buana University
  • Universitas Bhayangkara Jakarta Raya
  • Universitas Teknologi Bandung
  • Politeknik Enjinering Indorama
  • Universitas Trisakti
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Agung Wahyudi BiantoroMercu Buana University3
Basuki Dwi EffendyAfiliasi tidak diketahui2
Monika Audiya PratiwiMercu Buana University2
Muhammad IkhsanMercu Buana University2
Rio Duzan OctaviantoMercu Buana University2
Paduloh PadulohUniversitas Bhayangkara Jakarta Raya1
Mochamad SaidimanUniversitas Teknologi Bandung1
Muhammad Nurul HidayatAfiliasi tidak diketahui1
Basuki Dwi EfendiAfiliasi tidak diketahui1
Abdul HamidMercu Buana University1
Alim MurwantoMercu Buana University1
Heru MaryantoMercu Buana University1
Arif Kusnan HidayantoMercu Buana University1
Adolf Asih SupriyantoPoliteknik Enjinering Indorama1
Swandya Eka PratiwiMercu Buana University1
Daisman P. B. AjiUniversitas Trisakti1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">IMPLEMENTATION OF FREQUENCY RESPONSE FUNCTION ON TAPPER BEARING MAINTENANCE</dc:title>
	<dc:creator>Susanto, Ari</dc:creator>
	<dc:creator>Yusuf, Setyo Qomarudin</dc:creator>
	<dc:creator>Hamid, Abdul</dc:creator>
	<dc:creator>Wahyudi, Haris</dc:creator>
	<dc:creator>Subekti, Subekti</dc:creator>
	<dc:subject xml:lang="en-US">Predictive maintenance</dc:subject>
	<dc:subject xml:lang="en-US">Vibration analysis</dc:subject>
	<dc:subject xml:lang="en-US">Frequency response function</dc:subject>
	<dc:subject xml:lang="en-US">Taper bearing</dc:subject>
	<dc:description xml:lang="en-US">Bearing acts as a pad that supports a shaft to rotate without excessive friction, hold the radial load and maintain the motion towards the left and right shafts (Thrust Load) when turning together. Due to frequent taper bearing damage to the wheels, predictive maintenance is therefore necessary. One of the predictive maintenance methods widely used today is vibration analysis. The principles of vibration-based bearing damage detection using the Frequency Response Function (FRF) method will be shown in this paper. Harmonics signal is given to the bearing surface in a vertical or perpendicular direction to the taper bearing surface. The vibration response measurement was carried out on three axes (x, y, and z). The results of this study indicated the ability of FRFs to predict any damage on the bearing taper.  </dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2019-07-12</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/5051</dc:identifier>
	<dc:identifier>10.22441/sinergi.2019.2.006</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 23 No. 2 (2019); 132-138</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/5051/2651</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 SINERGI</dc:rights>
</oai_dc:dc>