Melola Discovery

← Melola Discovery

Jurnal SINTA 1

DETECTING CLASSIFIER-COAL MILL DAMAGE USING A SIGNAL VIBRATION ANALYSIS

Sinergi · Vol. 23 No. 3 (2019) · hlm. 175–183

DOI
10.22441/sinergi.2019.3.001
ISSN
2460-1217, 1410-2331
Terbit
2019-09-28
Penerbit
Universitas Mercu Buana
Bahasa
eng

Abstrak

A classifier plays a crucial role in the cement industry. It is in charge of separating coal that has been smoothened out and is ready to be burned although the coal is still rough after going through the grinding process. It takes a long time to burn coal that is not perfectly processed with a classifier. Therefore, it will reduce the amount of cement production, and the factories will release more energy. The closed arrangement and the number of components in the unit classifier requires a sophisticated method to detect damage that occurs early. Vibration analysis is a method that has been effectively employed in detecting the initial damage that occurs to the engine, especially the classifier. This study was aimed at detecting the location of the damage occurring in the classifier by using a vibration signal analysis and by measuring the magnitude of vibration and presenting it to the frequency domain (spectrum) form using Fast Fourier Transform. Engine condition assessment referred to ISO 10816-3 standard in velocity and displacement modes. Based on data spectrum analysis, the dominant damage laid in the unbalanced rotor. Spectrum characteristics of the damage appeared to be in the spectrum line worth 438.01 μm at a 3.5-Hz frequency (1X) radially. This analysis proved to be supported by the decrease in vibration value to 18.65 μm after balancing the Classifier rotor.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 140 tautan kepenulisan bersama · 67 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Mercu Buana University
  • Beijing Institute of Technology
  • Nanjing University of Science and Technology
  • Ungku Omar Polytechnic
  • National University of Malaysia
  • Kyushu University
  • National Taiwan University of Science and Technology
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dafit FeriyantoMercu Buana University6
Fajar AnggaraMercu Buana University6
Rikko Putra YouliaMercu Buana University5
Aberham Genetu FelekeBeijing Institute of Technology4
Wiwit SuprihatiningsihMercu Buana University3
Hui XiongBeijing Institute of Technology3
Muhamad FitriMercu Buana University2
Hadi PranotoMercu Buana University2
Nurato NuratoMercu Buana University2
Supaat ZakariaUngku Omar Polytechnic2
Nanang RuhyatMercu Buana University2
Solli Dwi MurtyasKyushu University2
Hanif GhufronMercu Buana University2
Yosua Heru IrawanNational Taiwan University of Science and Technology2
Nur IndahNational University of Malaysia1
Rachmat MuwardiMercu Buana University1
Imam HidayatMercu Buana University1
Muhammad ImranBeijing Institute of Technology1
Andi Firdaus SudarmaMercu Buana University1
Hifdzul Luthfan HabibullahMercu Buana University1
Diah UtamiMercu Buana University1
Yang XiaweiNorthwestern Polytechnical University1
Yudha Aji PramonoMercu Buana University1
Fathoni Putra WijayaAfiliasi tidak diketahui1
Dong WangBeijing Institute of Technology1
Muhammad ImranBeijing Institute of Technology1
Himawan S. WibisonoMercu Buana University1
Agung Wahyudi BiantoroMercu Buana University1
Tri Wahyu AdinartoMercu Buana University1
Fatkur RachmanuPoliteknik Enjinering Indorama1
Imam HidayatMercu Buana University1
S.S. AbdulmalikAfiliasi tidak diketahui1
Irfan Evi NugrohoMercu Buana University1
Alina AlinaIndonesia Open University1
Alfian NoviyantoMercu Buana University1
Hadi PranotoMercu Buana University1
Samir Sani AbdulmalikNigerian Army University Biu1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">DETECTING CLASSIFIER-COAL MILL DAMAGE  USING A SIGNAL VIBRATION ANALYSIS</dc:title>
	<dc:creator>Romahadi, Dedik</dc:creator>
	<dc:creator>Luthfie, Alief Avicenna</dc:creator>
	<dc:creator>Desti Dorion, L. B.</dc:creator>
	<dc:subject xml:lang="en-US">Classifier</dc:subject>
	<dc:subject xml:lang="en-US">Vibration analysis</dc:subject>
	<dc:subject xml:lang="en-US">Cement industry</dc:subject>
	<dc:subject xml:lang="en-US">Spectrum</dc:subject>
	<dc:description xml:lang="en-US">A classifier plays a crucial role in the cement industry. It is in charge of separating coal that has been smoothened out and is ready to be burned although the coal is still rough after going through the grinding process. It takes a long time to burn coal that is not perfectly processed with a classifier. Therefore, it will reduce the amount of cement production, and the factories will release more energy. The closed arrangement and the number of components in the unit classifier requires a sophisticated method to detect damage that occurs early. Vibration analysis is a method that has been effectively employed in detecting the initial damage that occurs to the engine, especially the classifier. This study was aimed at detecting the location of the damage occurring in the classifier by using a vibration signal analysis and by measuring the magnitude of vibration and presenting it to the frequency domain (spectrum) form using Fast Fourier Transform. Engine condition assessment referred to ISO 10816-3 standard in velocity and displacement modes. Based on data spectrum analysis, the dominant damage laid in the unbalanced rotor. Spectrum characteristics of the damage appeared to be in the spectrum line worth 438.01 μm at a 3.5-Hz frequency (1X) radially. This analysis proved to be supported by the decrease in vibration value to 18.65 μm after balancing the Classifier rotor. </dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2019-09-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/x-rar</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/5565</dc:identifier>
	<dc:identifier>10.22441/sinergi.2019.3.001</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 23 No. 3 (2019); 175-183</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/5565/2933</dc:relation>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/5565/10752</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 SINERGI</dc:rights>
</oai_dc:dc>