Melola Discovery

← Melola Discovery

Jurnal SINTA 1

SIMULATION AND EXPERIMENTAL INVESTIGATION OF WRINKLE DEFECT IN DEEP DRAWING PROCESS OF CARBON STEEL SPCC SHAPED CYLINDER FLANGE CUP

Sinergi · Vol. 24 No. 3 (2020) · hlm. 197–206

DOI
10.22441/sinergi.2020.3.004
ISSN
2460-1217, 1410-2331
Terbit
2020-07-09
Penerbit
Universitas Mercu Buana
Bahasa
eng

Abstrak

A Sheet Metal Forming (SMF) process, especially deep drawing, is one of the manufacturing processes that commonly used in the automotive industry. Compared with casting and forging, the SMF process has several advantages, including lesser weight materials and broader variations in shape that can be made. One of the problems in the SMF process is the wrinkling phenomenon, which can cause the size and appearance defects of sheet products. The wrinkle occurs because of the mechanical properties of the material, product geometry, and blank holder force (BHF). Several variations of BHF were applied in these simulations and experiments to eliminate the wrinkle defects of cylinder flange cup test products. The characteristic of the cylinder flange cup is from the cold-rolled coiled steel plate (SPCC) type of material with a thickness of 0.8 and 1.0 mm, the height of 10 mm, the inner diameter of 58 mm, and flange diameter of 76 mm. Simple simulations of the SMF process were carried out by using Solidworks with version 2017, and the experiment was carried out at a 600 kN press with a punch velocity of 40 strokes per minute and blank holder force variations from 0 to 21 kN. The experimental data performed with a single die on a flanged cup cylindrical test material shows that the higher the blank holder force (BHF) number, the smaller the wrinkle defect, and it can be eliminated starting from the BHF number of 15 kN.

Kata kunci

Jaringan kolaborasi para penulis

18 penulis · 44 tautan kepenulisan bersama · 11 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indonesian Institute of Sciences
  • Mercu Buana University
  • Tun Hussein Onn University of Malaysia
  • National Research and Innovation Agency
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Fredina DestyoriniIndonesian Institute of Sciences1
Yuyun IrmawatiIndonesian Institute of Sciences1
Henry WidodoIndonesian Institute of Sciences1
Nanik IndayaningsihIndonesian Institute of Sciences1
Jarot RaharjoAfiliasi tidak diketahui1
Ade Utami HapsariAfiliasi tidak diketahui1
Retna Deca PravitasariAfiliasi tidak diketahui1
Hanif YulianiAfiliasi tidak diketahui1
Damisih DamisihAfiliasi tidak diketahui1
Aghni Ulma SaudiAfiliasi tidak diketahui1
Wahyu Mulyo UtomoTun Hussein Onn University of Malaysia1
Afarulrazi Abu BakarTun Hussein Onn University of Malaysia1
Triyanto PangaribowoMercu Buana University1
Abdul Hamid BudimanNational Research and Innovation Agency1
Dani Tri WahyudiIndonesian Institute of Sciences1
Desi FajarwatiMercu Buana University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">SIMULATION AND EXPERIMENTAL INVESTIGATION OF WRINKLE DEFECT IN DEEP DRAWING PROCESS OF CARBON STEEL SPCC SHAPED CYLINDER FLANGE CUP</dc:title>
	<dc:creator>Mulyanto, Bambang</dc:creator>
	<dc:creator>Khaerudini, Deni Shidqi</dc:creator>
	<dc:subject xml:lang="en-US">SMF</dc:subject>
	<dc:subject xml:lang="en-US">Deep drawing</dc:subject>
	<dc:subject xml:lang="en-US">Wrinkle</dc:subject>
	<dc:subject xml:lang="en-US">BHF</dc:subject>
	<dc:subject xml:lang="en-US">Cylinder flange cup</dc:subject>
	<dc:subject xml:lang="en-US">Carbon Steel SPCC</dc:subject>
	<dc:description xml:lang="en-US">A Sheet Metal Forming (SMF) process, especially deep drawing, is one of the manufacturing processes that commonly used in the automotive industry. Compared with casting and forging, the SMF process has several advantages, including lesser weight materials and broader variations in shape that can be made. One of the problems in the SMF process is the wrinkling phenomenon, which can cause the size and appearance defects of sheet products. The wrinkle occurs because of the mechanical properties of the material, product geometry, and blank holder force (BHF). Several variations of BHF were applied in these simulations and experiments to eliminate the wrinkle defects of cylinder flange cup test products. The characteristic of the cylinder flange cup is from the cold-rolled coiled steel plate (SPCC) type of material with a thickness of 0.8 and 1.0 mm, the height of 10 mm, the inner diameter of 58 mm, and flange diameter of 76 mm. Simple simulations of the SMF process were carried out by using Solidworks with version 2017, and the experiment was carried out at a 600 kN press with a punch velocity of 40 strokes per minute and blank holder force variations from 0 to 21 kN. The experimental data performed with a single die on a flanged cup cylindrical test material shows that the higher the blank holder force (BHF) number, the smaller the wrinkle defect, and it can be eliminated starting from the BHF number of 15 kN.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2020-07-09</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/7337</dc:identifier>
	<dc:identifier>10.22441/sinergi.2020.3.004</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 24 No. 3 (2020); 197-206</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/7337/3538</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 SINERGI</dc:rights>
</oai_dc:dc>