Jurnal SINTA 1
DESIGN OF ANTI-SLIP SHOES FOR 12 TON PALM OIL TRUCK WHEELS
Sinergi · Vol. 24 No. 3 (2020) · hlm. 213–222
- ISSN
- 2460-1217, 1410-2331
- Terbit
- 2020-07-09
- Penerbit
- Universitas Mercu Buana
- Bahasa
- eng
Abstrak
The rainy season will have a severe problem to the transportation sector (including heavy-duty trucks) in the off-road area in Indonesia, especially in areas that do not have permanent access roads (asphalt or concrete roads). For heavy vehicles, especially oil palm transport trucks will experience such obstacles, including slippage when crossing muddy dirt roads, and it will have an impact on the logistics delivery process. Therefore, it is necessary to design a support system, especially on the wheels, to reduce the risk of skidding or rolling on truck-type vehicles. In this work, the design of the anti-slip shoe wheels of the colt diesel double type truck (CDD) is used on the rear-wheel-drive as a tool for handling the slippage. In this design, the maximum traction factor of the wheels based on the calculation on the rolling resistance should be higher than 594 kg. The next step is to determine the value of soil cohesion and soil internal friction angle obtained from the previous studies. In this study, a calculation simulation was carried out to accomplish the design of the main components of the anti-slip of a truck wheel in the form of a traction rod fin. The design is namely U channel profile steel based on SNI 07-0052-2006 type U50, U65, and U80 with dimensions of the fin depth (z) are 3.8 cm, 4.2 cm, and 4.5 cm and length of 30 cm. The results show that the three types of U channel iron used for the anti-slip shoes are useful for freeing trucks from slippage with a total load of 12 tons. Thus, the truck will be safe when crossing the muddy roads with clay, muddy clay, and sandy loam under the following conditions: minimum cohesion number of 0.008 kg/cm2, minimum internal friction angle in the soil of 4.631°, and the maximum water content of 59.6%.
Kata kunci
Jaringan kolaborasi para penulis
18 penulis · 44 tautan kepenulisan bersama · 11 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
- Indonesian Institute of Sciences
- Mercu Buana University
- Tun Hussein Onn University of Malaysia
- National Research and Innovation Agency
- Afiliasi tidak diketahui
- Organisasi berbeda
- Organisasi sama
- Afiliasi tidak diketahui
- Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
| Rekan penulis | Organisasi | Artikel bersama |
|---|---|---|
| Fredina Destyorini | Indonesian Institute of Sciences | 1 |
| Yuyun Irmawati | Indonesian Institute of Sciences | 1 |
| Henry Widodo | Indonesian Institute of Sciences | 1 |
| Nanik Indayaningsih | Indonesian Institute of Sciences | 1 |
| Jarot Raharjo | Afiliasi tidak diketahui | 1 |
| Ade Utami Hapsari | Afiliasi tidak diketahui | 1 |
| Retna Deca Pravitasari | Afiliasi tidak diketahui | 1 |
| Hanif Yuliani | Afiliasi tidak diketahui | 1 |
| Damisih Damisih | Afiliasi tidak diketahui | 1 |
| Aghni Ulma Saudi | Afiliasi tidak diketahui | 1 |
| Wahyu Mulyo Utomo | Tun Hussein Onn University of Malaysia | 1 |
| Afarulrazi Abu Bakar | Tun Hussein Onn University of Malaysia | 1 |
| Triyanto Pangaribowo | Mercu Buana University | 1 |
| Abdul Hamid Budiman | National Research and Innovation Agency | 1 |
| Bambang Mulyanto | Mercu Buana University | 1 |
| Desi Fajarwati | Mercu Buana University | 1 |
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.