Melola Discovery

← Melola Discovery

Jurnal SINTA 1

OPTIMIZATION OF THE RESISTANCE SPOT WELDING PROCESS OF SECC-AF AND SGCC GALVANIZED STEEL SHEET USING THE TAGUCHI METHOD

Sinergi · Vol. 25 No. 3 (2021) · hlm. 319–328

DOI
10.22441/sinergi.2021.3.9
ISSN
2460-1217, 1410-2331
Terbit
2021-08-25
Penerbit
Universitas Mercu Buana
Bahasa
eng

Abstrak

This article present the optimization work describes out to joint the dissimilar galvanized steel of SECC-AF (JIS G 3313) and SGCC (JIS G 3302) material. A zinc coating on the surfaces of the galvanized steel sheets will decrease the weldability characteristic of the material. This study used dissimilar galvanised steel sheets to obtain the highest tensile shear strength from the specified resistance spot welding. This research used the Taguchi method with 4-variables and mixed-experimental levels. The mixed-experimental level, namely 2-experimental levels for the first variable and 3-experimental levels for other variables. The highest tensile shear strength was achieved in 5282.13 N. This condition is achieved at a squeezed time of 20 cycles, 27 kA-welding currents, welding time of 0.5 seconds, and holding time of 18 cycles. The S/N ratio analysis has shown the welding current had the most significant effect, followed by welding time, squeeze time, and holding time. The delta values of S/N ratio were 0.79, 0.64, 0.26 and 0.07, respectively. The ANOVA analysis has shown that the P-value of welding current and welding time is 0.006 (0.6%) and 0.015 (1.5%), respectively. This result is expected for optimizing resistance spot welding quality in other materials or significant aspects.

Kata kunci

Jaringan kolaborasi para penulis

38 penulis · 173 tautan kepenulisan bersama · 88 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Buana Perjuangan Karawang
  • Sekolah Tinggi Teknologi Wastukancana
  • Bandung Institute of Technology
  • Padjadjaran University
  • Indonesia University of Education
  • Universiti Teknologi Brunei
  • Indonesian Institute of Sciences
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Choirul AnwarSekolah Tinggi Teknologi Wastukancana6
Dede Ardi RajabSekolah Tinggi Teknologi Wastukancana5
Sukarman SukarmanUniversitas Buana Perjuangan Karawang5
Amin RaisSekolah Tinggi Teknologi Wastukancana4
Aries AbbasUniversity of Kuala Lumpur4
Murtalim MurtalimUniversitas Buana Perjuangan Karawang4
Fathan Mubina DewadiUniversitas Buana Perjuangan Karawang4
Yulfian AminandaUniversiti Teknologi Brunei3
Muhamad Taufik UlhakimUniversitas Buana Perjuangan Karawang3
Nazar FazrinUniversitas Buana Perjuangan Karawang3
Tomas IrfaniUniversitas Buana Perjuangan Karawang3
Afif HakimUniversitas Buana Perjuangan Karawang3
Jatira JatiraSekolah Tinggi Teknologi Wastukancana2
Rohman RohmanSekolah Tinggi Teknologi Wastukancana2
Muhammad Ali AkbarSekolah Tinggi Teknologi Wastukancana2
KhoirudinUniversitas Buana Perjuangan Karawang2
SukarmanUniversitas Buana Perjuangan Karawang2
Mardiyati MardiyatiBandung Institute of Technology1
Bambang WidyantoBandung Institute of Technology1
Iman RahayuPadjadjaran University1
Sahrul HidayatPadjadjaran University1
Joddy Arya LaksmonoIndonesian Institute of Sciences1
Fajar MucharromAfiliasi tidak diketahui1
Karyadi KaryadiUniversitas Buana Perjuangan Karawang1
Sukarman SukarmanNational Research and Innovation Agency1
Dodi MulyadiUniversitas Buana Perjuangan Karawang1
Alizar NurdinUniversitas Buana Perjuangan Karawang1
Azizah AzizahIndonesia University of Education1
Muji SetiyoUniversitas Muhammadiyah Magelang1
Renata Lintang AzizahIndonesia University of Education1
Amir AmirUniversitas Buana Perjuangan Karawang1
Nazar FahrizinUniversitas Buana Perjuangan Karawang1
W.H. AzmiUniversiti Malaysia Pahang Al-Sultan Abdullah1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">OPTIMIZATION OF THE RESISTANCE SPOT WELDING PROCESS OF SECC-AF AND SGCC GALVANIZED STEEL SHEET USING THE TAGUCHI METHOD</dc:title>
	<dc:creator>Sukarman, Sukarman</dc:creator>
	<dc:creator>Abdulah, Amri</dc:creator>
	<dc:creator>Shieddieque, Apang Djafar</dc:creator>
	<dc:creator>Rahdiana, Nana</dc:creator>
	<dc:creator>Khoirudin, Khoirudin</dc:creator>
	<dc:subject xml:lang="en-US">Dissimilar material</dc:subject>
	<dc:subject xml:lang="en-US">Galvanized steel</dc:subject>
	<dc:subject xml:lang="en-US">Resistance spot welding</dc:subject>
	<dc:subject xml:lang="en-US">S/N Ratio</dc:subject>
	<dc:subject xml:lang="en-US">Taguchi method</dc:subject>
	<dc:description xml:lang="en-US">This article present the optimization work describes out to joint the dissimilar galvanized steel of SECC-AF (JIS G 3313) and SGCC (JIS G 3302) material. A zinc coating on the surfaces of the galvanized steel sheets will decrease the weldability characteristic of the material. This study used dissimilar galvanised steel sheets to obtain the highest tensile shear strength from the specified resistance spot welding. This research used the Taguchi method with 4-variables and mixed-experimental levels. The mixed-experimental level, namely 2-experimental levels for the first variable and 3-experimental levels for other variables. The highest tensile shear strength was achieved in 5282.13 N. This condition is achieved at a squeezed time of 20 cycles, 27 kA-welding currents, welding time of 0.5 seconds, and holding time of 18 cycles. The S/N ratio analysis has shown the welding current had the most significant effect, followed by welding time, squeeze time, and holding time. The delta values of S/N ratio were 0.79, 0.64, 0.26 and 0.07, respectively. The ANOVA analysis has shown that the P-value of welding current and welding time is 0.006 (0.6%) and 0.015 (1.5%), respectively. This result is expected for optimizing resistance spot welding quality in other materials or significant aspects.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2021-08-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/msword</dc:format>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/10053</dc:identifier>
	<dc:identifier>10.22441/sinergi.2021.3.9</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 25 No. 3 (2021); 319-328</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/10053/4828</dc:relation>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/10053/10957</dc:relation>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/10053/10958</dc:relation>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/10053/10959</dc:relation>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/10053/10961</dc:relation>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/10053/10963</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 SINERGI</dc:rights>
</oai_dc:dc>